• Nano
• /
• 제13권10호
• /
• pp.1850121.1-1850121.11
• /
• 2018

In this study, a series of $LaMnO_3$-diamond composites with varied $LaMnO_3$ mass contents supported on micro-diamond have been synthesized using a sol-gel method. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and the Fourier transform infrared spectra (FTIR). Meanwhile, the photocatalytic performances were also tested by photoluminescence (PL) spectroscopy, ultraviolet-visible diffuse reflection spectra (UV-Vis DRS) and the degradation of weak acid red C-3GN (RC-3GN). Results show that the peak position of $LaMnO_3$ is shifted to low angle after the introduction of diamond, and perovskite particles uniformly distributed on the surface of diamond, forming a network structure, which can increase the active sites and the absorption of dye molecules. When the mass ratio of $LaMnO_3$ and diamond is 1:2 (LMO-Dia-2), the composite shows the most excellent photocatalytic activity. This result offers a sample route to enlarge the range of the application of micro-diamond and provide a new carrier for perovskite photocatalysts.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3626-3631
• /
• 2009

본 논문에서는 아날로그 회로에 사용되는 NMOSFET에 대한 Hot-Carrier 열화특성을 조사하였다. 여러 값을 갖는 게이트 전압으로 스트레스를 인가한 후, 소자의 파라미터 열화를 포화 영역에서 측정하였다. 스트레스 게이트 전압의 범위에 따라 계면 상태(interface state) 뿐 아니라 전자와 정공의 포획이 드레인 근처 게이트 산화막에서 확인되었다. 그리고 특히 낮은 게이트 전압의 포화영역에서는 정공의 포획이 많이 발생하였다. 이러한 전하들의 포획은 전달 컨덕턴스 ($g_m$) 및 출력 컨덕턴스 ($g_{ds}$)의 열화의 원인이 된다. 아날로그 동작 범위의 소자에서 파라미터 열화는 소자의 채널 길이에 매우 민감하게 반응한다. 채널길이가 짧을수록 정공 포획이 채널 전도도에 미치는 영향이 증가하게 되어 열화가 증가되었다. 이와 같이 아날로그 동작 조건 및 아날로그 소자의 구조에 따라 $g_m$ 및 $g_{ds}$의 변화가 발생하므로 원하는 전압 이득($A_V=g_m/g_{ds}$)을 얻기 위해서는 회로 설계시 이러한 요소들에 대한 고려가 필요하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.77-79
• /
• 2004

A typical conventional systems of a linear motion use rack and pinions or ball screws to convert rotary motions from DC servo motors. A linear motor has been used a several field for a MEMS technology and a aircraft carrier. We was studied a transient response of a linear actuator with a damping ratio, spring constant and a pressed power.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.606-621
• /
• 2004

A dynamic analysis using a hybrid finite element method was performed to characterize the effects of a number of manufacturing errors on bearing forces and critical tooth stress in the elements of a planetary gear system. Some tolerance control guidelines for managing bearing forces and critical stress are deduced from the results. The carrier indexing error for the planet assembly and planet runout error are the most critical factors in reducing the planet bearing force and maximizing load sharing, as well as in reducing the critical stress.

• 대한전기학회논문지
• /
• 제37권1호
• /
• pp.10-17
• /
• 1988

The torsional resonance of the generator shaft system has the possibility of inducing voltages across the stator winding because it is a carrier with the field excitation. And these torsional induced stator currents inducs the eddy current in the rotor. This paper describes the eddy current based on the double Fourier series method. The forces generating during the torsional interaction are computed using the Maxwell's magnetic stress tensor for each of the Fouriercomponennts. And then, these forces of the Fourier components are evaluated by the Parseval's theorem.

• 한국광학회지
• /
• 제1권1호
• /
• pp.87-97
• /
• 1990

With the recent advent of various ultrashort pulse lasers, time-resolved laser spectroscopic techniques have been widely recognized as versatile tools to study ultrafast phenomena in many research areas. These techniques are currently being employed not only to study atomic and molecular physics but to characterize the excited state or the carrier dynamics on surfaces of semiconductors, metals and thin layer materials. Also the sweetching speed measurement of ultrafast electro-optic devices using ultrashort laser pulses becomes important in high-speed electronics. Here, some principles of spectroscopic techniques with ps or fs lasers and their applications are summarized briefly.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.142-156
• /
• 2015

A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.146-155
• /
• 2000

이 논문은 통상우편물의 자동구분 처리를 위한 한글 4 State 바코드문자의 규격을 설계한 것이다. 이 한글 4 State 바코드문자의 생성은 우편물 자동구분, 운송을 위한 우편물량 정보의 획득, 우편고객에게 우편요금별납의 자동정산, 종적추적과 같은 부가서비스 제공과 데이터 수록 및 획득을 위하여 필요하다. 한글 4 State 바코드에 수록되는 정보의 내용은 우편번호, 순로코드, 고객정보(고객 식별번호, 이름 등) 그리고 오류교정을 위한 체크문자로 구성되었으며, 하나의 바코드라벨로 인쇄되도록 시험용 인쇄모듈과 판독모듈을 개발하여 시험하였다. 한글 4 State 바코드에 순로코드를 적용할 경우에 우편물 자동구분 범위가 확장되고, 고객바코드 인쇄제도에 의한 부가서비스를 우편고객에게 제공할 수 있다. 또한, 물량 및 과금 데이터의 획득이 가능하게 되어 우편물 처리의 생산성 향상계획을 위한 정보로 활용될 수 있을 것으로 기대된다.

• ETRI Journal
• /
• 제27권3호
• /
• pp.257-266
• /
• 2005

Many multi-modulus blind equalization algorithms (MMA) have been presented in the past to overcome the undesirable high misadjustment exhibited by the well-known constant modulus algorithm. Some of these MMA schemes, specifically tailored for quadrature amplitude modulation (QAM) constellations, have also been proved to fix the phase offset error without needing any rotator at the end of the equalizer stage. In this paper, a new multi-modulus algorithm is presented for QAM signals. The contribution lies in the technique to incorporate the sliced symbols (outcomes of decision device) in the multi-modulus-based weight adaptation process. The convergence characteristics of the proposed sliced multi-modulus algorithm (S-MMA) is demonstrated by way of simulations, and it is shown that it gives better steady-state performance in terms of residual inter-symbol interference and symbol-error rate. It has also been shown that the proposed algorithm exhibits lesser steady-state misadjustment compared to the best reported MMA.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.128-132
• /
• 2009

Polycrystalline samples of $(Ru_{0.8}Nb_{0.2})Sr_2(Gd_{1.5-x}Nd_xCe_{0.5})Cu_2O_z$($ 0{\leq}x{\leq}1.25$) have been synthesized by a solid-state reaction route. The X-ray diffraction data revealed that the Nd solubility limit can be placed between x=0.5 and x=0.75. The superconducting transition temperature decreased with increasing Nd content, confirming that Nd entered the lattice. Room-temperature thermoelectric power measurements showed that all the samples are in the underdoped state and the partial substitution of Nd for Gd resulted in a decrease in the carrier density on the superconducting layers.