• 제목/요약/키워드: carbonation technology

검색결과 150건 처리시간 0.025초

정밀안전진단 결과를 활용한 NATM터널(무근)의 라이닝 균열 종류별 발생원인 및 분석 - Part I (Analysis and cause of occurrence of lining cracks on NATM tunnel based on the precise inspection for safety and diagnosis - Part I)

  • 추진호;박성우;김형탁;지기환;윤태국
    • 한국터널지하공간학회 논문집
    • /
    • 제13권3호
    • /
    • pp.199-214
    • /
    • 2011
  • 균열, 누수, 박락, 철근노출, 부식, 탄산화 등은 터널 라이닝 건전도 평가항목으로 그 중에서 균열은 주요한 영향요인이다. 1980년 이후로, NATM은 터널의 굴착방법과 링폐합의 지반공학적 개념의 보급과 함께 넓게 적용되었으며, 라이닝에 발생된 균열의 연구도 진행되었으나 종균열에 제한된 연구가 주로 수행되었다. 본 논문에서는 11개의 공용중인 NATM터널의 정밀안전진단 결과를 활용하여 공간적인 위치 및 형태별로 분석하여 터널별 공통된 7개의 균열을 정의, 원인 및 분석, 사례 등을 나타내었다. 종류별 균열은 CCD스캐너 이미지를 3차원으로 분석하여 향후 NATM터널 정기점검 및 정밀안전진단 시 유익한 사례가 휠 수 있도록 하였다.

고출력.고에너지 밀도의 아연금속-공기전지 (Rechargeable Zn-air Energy Storage Cells Providing High Power Density)

  • 박동원;김진원;이재광;이재영
    • 공업화학
    • /
    • 제23권4호
    • /
    • pp.359-366
    • /
    • 2012
  • 아연금속-공기전지는 기존의 이차전지보다 높은 중량당 에너지 밀도, 낮은 제조단가를 가짐과 동시에 소재적으로 친환경적이다. 소형 및 중대형 전력 저장 시스템, 전기자동차, 스마트 휴대기기의 상용화에 있어 최우선시 되고 있는 것은 배터리의 충 방전 능이다. 따라서 환원 촉매의 높은 과전압, 산화 전극의 불안정성 및 비가역성, 액체 전해질 사용에 따른 여러 문제점을 해결하여야 한다. 본 총설에서는 공기극 막의 손상 방지 기술, 아연금속 전극의 구조 개선을 통한 충전효율 저하 방지 기술, 부반응 및 부동태화를 막기 위한 하이브리드 전해질 도입 등의 최근 기술적 이슈와 연구동향을 소개하고자 한다.

TEM법에 의한 모르타르 중의 철근 부식 측정에 관한 연구 (A Study on the Measurement of Steel Corrosion in Mortar by TEM Method)

  • 이상호;한정섭
    • 한국해양공학회지
    • /
    • 제20권2호
    • /
    • pp.59-65
    • /
    • 2006
  • Steel, as a reinforcing mechanism in concrete, provides the tensile strength that is lacking in concrete, alone, and the high alkaline environment (pH 12.5) in concrete offers satisfactory protection against most corrosion of the steel. However, the corrosion of reinforcing steel in concrete can occur by chloride attack or carbonation, and it can cause a loss of integrity a section and concrete failure through cracking and spalling. In this study, a transient electro magnetic method (TEM) of a nondestructive technique is adapted to study the measuring method of steel corrosion in mortar. The sensor was made of an enameled wire, with a diameter of 0.25mm and anacril. He sensor configuration used was a coincident loop type. The secondary electro motive force (2nd EMF) was measured with SIROTEMIII, which equipped the accelerator. The accelerator allowsthe transmitter to turn off approximately $10\sim15$ times faster than normal. The high-resolution time series, used for very shallow or a high resistivity investigation was selected. After steels were corroded by the salt spray, during 4, 8, 15 and 25 days, they were embedded in mortar. The content results acquired in this study are as follows. The variation of the secondary electro motive force (2nd EMF) was shown by the change of steel surface with different corrosion time steel. It was confirmed that measurement of steel corrosion in mortar by a transient electro-magnetic method (TEM) can be possible.

순환골재(循環骨材)를 혼입(混入)한 모르타르 경화체(硬化體)의 내구(耐久) 특성(特性) (Durability of Mortar Matrix Replaced with Recycled Fine Aggregates)

  • 김종필;이승태;정호섭;박광필;김성수
    • 자원리싸이클링
    • /
    • 제16권6호
    • /
    • pp.20-27
    • /
    • 2007
  • 순환골재를 콘크리트용 골재로 활용하기 위한 연구의 일환으로 2종류의 순환골재를 천연골재 중량의 0, 25, 50, 75 및 100%의 5단계로 혼입한 시멘트 경화체를 제조한 후 시멘트 경화체의 내구 특성을 평가한 결과, 골재의 특성에 따라서 시멘트 경화체의 성능이 상이하게 나타나는 것으로 확인되었다. RAB의 경우 RAA에 비하여 부착 모르타르 및 흡수율이 작아서 혼입율 50%까지는 모든 시험 항목에서 천연골재와 거의 유사하거나 약간 작은 값을 나타내었으며, 향후 순환골재를 콘크리트 구조용 골재로 사용하기 위해서는 순환골재에 부착된 모르타르량을 최대한 제거하고, 천연골재에 25%까지 혼입하여 사용해도 무관할 것으로 판단된다.

세라믹스, 알루미나 및 실리콘 카바이드 혼합물이 첨가된 콘크리트 표면보호재의 성능 평가 (Evaluation of Ceramics, Alumina and Silicone Carbide Added Concrete Surface Protecting Agent)

  • 공진희;김영근;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.43-46
    • /
    • 2009
  • The purpose of this study is to enhance durability of concrete structures that uses this surface protecting material by carrying out the performance test of the surface protecting material of concrete, and as s result, we reached out the conclusion as follow. 1. As a result of the test measuring the stability and adhesive power of conductive film against ultraviolet, freezing & thawing, and damage from seawater that deteriorate the surface protecting material, it was turned out to meet the performance criteria specifying in the KS standard enough to gain a good evaluation to use as a surface protecting material. 2. As a result of the test identifying the neutralization-furtherance, it was assessed to be capable of protecting effectively concrete structures from carbonic acid gas by a very low depth of 0.1mm of neutralization. 3. As a result of the test identifying Penetrated Resistance Properties of chloride ion, as it was turned out to have a very low value of 819 Coulombs, it was assessed that even in the environment where the corrosion by chloride such sea environment is very affective, the film can effectively protect the concrete structure. 4. As a result of the test identifying freezing & thawing, as there was no change in reduction of mass after 400 cycle, it was assessed that the film has a good resistance against freezing & thawing. According to the results of study above, it is expected that this technology can extend its durability of concrete structure and be widely used for concrete structure through means (methods) to prevent the neutralization and damage from seawater as original purposes of the surface protecting material.

  • PDF

지속가능 에너지 패러다임 변화속에서 석탄의 활용 (Usage of Coal in the Paradigm Shift toward Sustainable Energy)

  • 박제현;양인재;이진수;이청룡
    • 자원환경지질
    • /
    • 제53권6호
    • /
    • pp.793-807
    • /
    • 2020
  • 그린뉴딜정책의 실현은 석탄을 연료에서 원료로 활용분야로의 전환을 촉진시킬 것이다. 석탄은 수소의 생산, 인조 흑연 및 활성탄의 제조 원료로 활용될 수 있다. 석탄은 Steam carbon(SC) 반응과 Water-Gas Shift(WGS) 반응 및 탄산화 반응을 통하여 수소를 생산할 수 있으며, CO2격리기술과 연동되어 사용되어야 한다. 인조흑연은 실리콘이나 철 등의 무기촉매의 존재하에서 탄화도가 높은 무연탄 등을 2400~2800℃의 흑연화 온도까지 열처리함으로서 제조될 수 있기 때문에 무연탄은 석유계 피치에 비해 원료 가격경쟁력 측면에서 잠재성이 있다. 한편, 최근 목질기원의 활성탄에 필적하는 넓은 비표면적 혹은 많은 양의 미세기공을 가진 석탄기원의 활성탄이 제조될 수 있음을 여러 연구를 통해 확인되었다. 따라서 석탄기원의 활성탄은 목질기원의 활성탄을 대체할 수 있을 것으로 기대된다.

상수원수 수질개선을 위한 취수장 전염소 투입에 관한 연구 (Prechlorination at Water Intake for the Quality Improvement of Raw Water)

  • 김대현;황수옥;정은재;신창수;유영범;홍승관
    • 한국물환경학회지
    • /
    • 제27권1호
    • /
    • pp.110-114
    • /
    • 2011
  • In this paper, in order to eliminate Limnoperna fortunei inhabiting the water conduction pipeline, prechlorination at the intake station was employed to improve the degradation of water quality due to the high pH of raw water taken at the downstream of Paldang Dam, algal growth, etc.. With the prechlorination concentration of 1.0mg/L at the intake station, the pH in the water well at the treatment plant decreased by 0.4, and with 1.5mg/L, by 0.6. Also, it eliminated Chlorophyll-a by about 95%, and the population of algae by about 49%. Such disinfection by-products (DBPs) as Trihalomathanes (THMs), Haloacetic Acids (HAAs), and Chloral Hydrate (CH) were under the quality standard for potable water, showing no change by the prechlorination, while raising the prechlorination rate from 1.0 up to 1.5mg/L, the DBPs in the water well increased by 1.5 to 3.1 times. As a consequence of testing Kyungan Stream, a branch stream flowing into Lake Paldang, the prechlorination (0.57mg/L, 1.14mg/L, 1.71mg/L) had no effect of eliminating the taste and odor compounds and total organic carbon (TOC) which is the DBPs precursor. As for the efficiency of Geosmin elimination by the rates of prechlorination and powder activated carbonation (PAC), it was found that the higher the concentration of PAC was (30ppm>20ppm>10ppm), the higher the efficiency was; the higher the rate of prechlorination was, the lower the efficiency by PAC was. Therefore, when taste and odor occur from raw water, suspending prechlorination at the intake or lowering the rate was proved to be more effective in eliminating the taste and odor compounds by PAC.

전기투석 공정에 의한 알칼리 회수: 총설 (Alkali Recovery by Electrodialysis Process: A Review)

  • 살센벡 아샐;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제33권3호
    • /
    • pp.87-93
    • /
    • 2023
  • 전기투석(ED)은 이온교환막을 통한 이온의 분리에서 중요한 과정이다. 해수담수화로 발생하는 염수 처리는 환경적으로 큰 문제이며 막분리 기술을 통한 재활용 효율이 높다. 마찬가지로 알칼리는 가죽, 전기도금, 염색, 제련 등과 같은 여러 화학 산업에서 생산된다. 폐기물의 고농도 알칼리는 부식성이 높고 화학적 산소 요구량(COD) 값이 높기 때문에 환경에 방출하기 전에 처리해야 합니다. 칼슘과 마그네슘의 농도는 염수의 거의 두 배이며 주요 환경 오염 물질인 이산화탄소의 흡착에 완벽한 후보입니다. 수산화나트륨은 양극성 막 전기투석 공정으로 쉽게 생산되는 금속 탄산화 공정에 필수적입니다. 역삼투압(RO), 나노여과(NF), 초여과(UF), ED 등 다양한 공정을 통해 회수가 가능하다. 본 검토에서는 알칼리 회수를 위한 이온교환막에 의한 ED 공정에 대해 논의한다.

페로니켈 슬래그로 부터 제조된 Mg(OH)2를 이용한 CO2 고정화 (CO2 Fixation by Magnesium Hydroxide from Ferro-Nickel Slag)

  • 송호양;서종범;강성규;김인득;최봉욱;오광중
    • 청정기술
    • /
    • 제20권1호
    • /
    • pp.42-50
    • /
    • 2014
  • 본 논문은 페로니켈 슬래그를 이용하여 간접적으로 $CO_2$를 고정화시키는 기술에 대한 연구를 하였으며, 효율적으로 Mg를 추출하여 제조된 $Mg(OH)_2$$CO_2$ 고정화 최적 조건을 제시하고자 하였다. 실험 결과, 최적의 추출조건은 1 M $H_2SO_4$, 반응온도 333 K이었으며, 용출액에 NaOH를 첨가하여 pH값을 8까지 높일 경우, 침전물은 $Fe_2O_3$로 확인되었다. 또한 pH 값이 11까지 높아질 때, 그 성분은 $Mg(OH)_2$로 나타났다. 이렇게 제조된 $Mg(OH)_2$ slurry 용액을 $CO_2$ 고정화실험에서 준 2차 탄산화반응 모델을 통해 적용한 결과, 반응온도 및 초기 $CO_2$분압에 따라 초기 $CO_2$의 고정화 속도를 증진할 수 있는 반면 반응온도가 323 K 이상 높아질 경우, 고정화속도가 감소하는 것으로 나타났다. 또한 $CO_2$ 고정화반응 시 이온을 조사한 결과, $CO_2$를 고정화 할 수 있는 최적의 pH 조건으로 8.38 이상 유지해야 할 것으로 판단되었다. 종합적으로 본 연구에서는 페로니켈 슬래그를 이용하여 $CO_2$를 고정화하기 위한 최적의 조건을 도출하였으며, 향후 $CO_2$를 고정화 하기 위한 연구의 기초자료로 활용할 수 있을 것으로 판단된다.

팽창재와 수축저감제를 사용한 고성능 콘크리트의 내구성 평가 (Evaluation on Durability of High Performance Concrete with Expansive Additive and Shrinkage Reducing Admixture)

  • 고경택;강수태;박정준;류금성
    • 콘크리트학회논문집
    • /
    • 제18권2호
    • /
    • pp.205-211
    • /
    • 2006
  • 본 연구는 팽창재와 수축저감제를 조합 사용하여 수축변형률이 저감된 저수축 고성능 콘크리트에 대하여 내구성을 평가하였다. 그리고 저수축 고성능 콘크리트와 비교를 위해 동일한 물-결합재비에서 팽창재와 수축저감제를 사용하지 않은 고성능 콘크리트와 일반 콘크리트에 대해서도 시험을 실시하였다. 그 결과, 저수축 고성능 콘크리트는 동일한 물-결합재비를 가진 고성능 콘크리트에 비해 압축강도와 인장강도가 다소 크게 나타났다. 염소이온 침투 저항성과 탄산화에 대한 저항성은 고성능 콘크리트와 일반 콘크리트에 비해 우수하며, 동결융해 저항성은 동결융해시험 600사이클에서도 내구성 지수가 거의 100으로 나타났다. 또한 수밀성과 공극분포를 검토한 결과, 저수축 고성능 콘크리트는 고성능 콘크리트 또는 일반 콘크리트에 비해 시멘트 경화체 조직이 치밀해져 내구성이 향상되는 것으로 분석되었다. 따라서 팽창재와 수축저감제를 조합사용한 저수축 고성능 콘크리트를 구조물에 적용한 경우, 콘크리트의 수축과 균열을 저감시킬 수 있을 뿐만 아니라 내구성능이 향상되는 결과를 얻을 수 있을 것으로 분석되었다.