• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.203-210
• /
• 2010

NiO is commonly used as the cathode for the molten carbonate fuel cell due to its stability and high electrical conductivity in molten carbonates and oxygen atmosphere. However, long-term operation of MCFC has a serious problem which is the degradation of cathode material, the so-called Ni dissolution. In the present study, we have attempted to synthesize a new alternative cathode material as Co/Nb-coated NiO cathode. The results obtained in this study suggest that the Co/Nb-coated NiO cathode can be utilized as having lower dissolution and higher cell performance than those of the pure NiO cathode.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.313-317
• /
• 2008

[ $LaFeO_3$ ] powders were synthesized using a method involving solution combustion, and the surface properties of these powders were examined by x-ray photoelectron spectroscopy. As the amount of fuel increased during the synthesis, the $LaFeO_3$ powders became amorphous with a large plate-like shape. It was found that the O 1s spectra were composed of two types of photoelectrons by deconvolutioning the spectra. Photoelectrons with higher binding energy come from adsorbed oxygen ($O^-$) whereas those with lower energy come from lattice oxygen ($O^{2-}$). The ratio of adsorbed and lattice oxygen increased as the ratio of the fuel and nitrate (${\Phi}$) increased. The binding energy of both types of oxygen increased as ${\Phi}$ increased due to the formation of carbonates.

• Journal of Magnetics
• /
• v.14 no.2
• /
• pp.62-65
• /
• 2009

The multiferroic $BiFeO_3$ has been investigated extensively in both thin film and ceramic form. However, the synthesis of a perfect sample with high resistivity is a prerequisite for examining its properties. This paper reports the synthesis of multiferroic $BiFeO_3$ along with its structural, electrical and magnetic properties in ceramic form. Polycrystalline ceramic samples of $BiFeO_3$ were synthesized by solid-state reaction using high purity oxides and carbonates. The formation of a single-phase compound was confirmed by x-ray diffraction and its lattice parameters were determined using a standard computer program. The microstructural studies and density measurement confirmed that the prepared samples were sufficiently dense for an examination of its electrical and magnetic properties. The dc electrical conductivity studies show that the sample was resistive with an activation energy of ${\sim}0.81\;eV$. The magnetization measurement showed a linear ($M{\sim}H$) curve indicating antiferromagnetic characteristics.

• Journal of the Korean Society of Tobacco Science
• /
• v.8 no.1
• /
• pp.3-12
• /
• 1986

Extensive studies have been made of the effects of freeness and the calcium carbonate on the physical properties of hand-sheets from commercial flax, kenaf and NBKP. As freeness increased, the hand-sheets from the pulps above showed higher retention rate of calcium carbonate, brightness, opacity and tensile strength but lower value of porosity. Among these, the retention rate(46%) showed the highest value In kenaf, the porosity(205 c.u.) in flax, and the opacity(67%) and the tensile strength(2.8kg) in NBKP respectively. Under the constant freeness, retention rate of calcium carbonate in hand-sheets increased until 1.4 times pulp weight was added in flax and kenaf but, in NBKP, decreased from the beginning of 0.8 times with the highest retention rate. Results above led to higher porosity, opacity, brightness but lowered tensile strength. Mixed pulp(Kenaf+ NBKP) showed higher retention rate than each pulp. Pictures of X-ray diffraction and scanning electron microscope demonstrated that both of domestic and foreign calcium carbonates were calcite of spindle form. The brightness of foreign calcium carbonate was higher by 295 than that of domestic one. The average particle size of calcium carbonate was 2.1 U m(domestic), 3.6 U m(foreign).

• Journal of the Korean earth science society
• /
• v.35 no.5
• /
• pp.305-312
• /
• 2014

A number of coated grains (spherical to elongated ones in shape) were collected from a small stream, Dijon, France. They were characterized by typical concentric lamination surrounding broken twigs, and were thus identified as concentric precipitation on plant twigs. Within carbonate coatings of the plant twigs, two morphological groups including, eukaryotic green algae (Vaucheria sp.) and cyanobacteria (Scytonema sp. and Rivularia sp.) were detected, which form carbonate crystals that are surrounding their filaments. The filaments could have triggered carbonate precipitation by photosynthetic removal of $CO_2$ causing the increase of alkalinity of the water, and by supporting their sheaths as nucleation sites. Such encrusted twigs were found from 70 meters downstream, in which temperature and pH were measured as $11.1^{\circ}C$ and 8.18, respectively. These water chemistries ($11.1^{\circ}C$ and pH 8.18), with the aid of microbial photosynthesis, were likely to provide a suitable condition for carbonate precipitation on the twigs.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.517-523
• /
• 2007

For the preparation of tricalciumaluminate $(C_3A)$ clinker, in traditional clinkering method using oxides and carbonates as a raw material, uneconomical repetition of burning have been necessary to avoid the melting of clinker by eutectic reaction in the system $CaO-Al_2O_3$. In this study, special starting raw materials for the clinker burning were prepared from a mixture of oyster shell and aluminium hydroxide by heating to $1100^{\circ}C$ and hydrating at $30^{\circ}C$. The starting raw materials, hardened body with weak hydraulic strength, were mainly composed of $C_3AH_6$ formed by resolution-precipitation mechanism of the system $CaO-Al_2O_3-H_2O$. By heating them, relatively pure $C_3A$ clinker could be obtained by one-time burning at the fairly lower temperature than that of conventional method. The easier formation of $C_3A$ clinker seemed to be caused by higher compositional homogeneity and stoichiometry of the starting materials, high surface area and crystallographic instability of the thermally decomposed products, and the catalytic effect of decomposed moisture on the early-stage crystallization of calciumaluminates. The basic hydration behavior of the clinker was also confirmed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.640-647
• /
• 1996

It has been found that an white precipitates at the inside surface is a common characteristics of soda-lime-silica glasses which have not undergone special surface treatments during hot weather season. In this study, the white deposits were examed using by solution method, surface analysis etc., and the dependence of weathering on the atmospheric condition was also investigated. As a results, the white precipitates on the glass surface was discorved as carbonates like $Na_2CO_3{\cdot}H_2O,CaCO_3$. Coming to atmosphere-dependence, it was shown that the glass made and stored at sea shore province had 3 times much severe weathering than that at land province.

• Journal of the Speleological Society of Korea
• /
• no.92
• /
• pp.9-18
• /
• 2009

A number of closed metal mines act as point sources of contamination on nearby streams, soils and plants in our country. The contamination of twelve decomposed samples had earned from nine closed metal mines had been evaluated by TEA-3000. The contents of heavy metal with ion fraction exchange and carbonate fraction forms had been showed that the speciation of heavy metals represented with easy solubility, mobility and bioavailable of plants, and in case of sulfide compounds and organic residuals forms are related with the speciation of metals which may be stable forms because of strong bindable capacity. Also heavy metals elements in mosts of mines got with relative stable within crystal lattice, but results of trace element analyser showed that, in the most of tailings from mine areas, large portions of concentration of heavy metals were explained as stable from, sulfides/ organics and residual. In tailing from Imchun mines, the concentrations extracted by water were relatively high as compared with other mine areas whose total concentrations were very high because of large quantities of exchangeable ions and carbonates and low soil pH. Danger Index (D.I.) suggested in this study was based on the cumulative concentrations of step 1 and 2 from the result of trace element analyser. When the soil pH was considered, this index became better indicator to determine the priority for the remediation of mine area.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.69-78
• /
• 1993

Contents of heavy metals (Cr, Cu, Zn, Cd, and Pb) in the sediments of Ulsan Bay were investigated by the sequential extraction methods that classifies heavy metals into five types of chemical forms: exchangeable, bound to carbonates, bound to Fe-Mn oxides, bound to organic matter and residual. The analyses were determined by using an ICP-MS. Total Cr concentrations in the sediments were in the range of 41.6-96.4, Cu 60.7-680, Zn 189-1954, Cd 33.1-83.4, and Pb 138-567 mg/kg. Results of sequential fractionation indicates that relatively high proportion ( ~44%) of Cu is associated with organic matter. A large proportion of Pb is associated with three types of chemical forms: Fe-Mn oxides, organic matter, and residual. There were significant correlation in concentrations between the exchangeable components and total organic carbons. The heavy metals In the residual phase cannot be easily released to the environment since these are bound to the crystal lattice. But, reducible and organic Phases con a significant amount of most heavy metals. Therefore, there is Potential dancer of a substantial amount of metals becoming chemically mobile with environmental changes.

• Korean Journal of Remote Sensing
• /
• v.35 no.4
• /
• pp.535-544
• /
• 2019

This study demonstrated the ability of a Landsat-8 OLI multispectral data to identify and delineate hydrothermal alteration zones around auriferous prospects within the crystalline basement, North-western Nigeria. Remote sensing techniques have been widely used in lithological, structural discrimination and alteration rock delineation, and in general geological studies. Several artisanal mining activities for gold deposit occur in the surrounding areas within the basement complex and the search for new possible mineralized zones have heightened in recent times. Systematic Landsat-8 OLI data processing methods such as colour composite, band ratio and minimum noise fraction were used in this study. Colour composite of band 4, 3 and 2 was displayed in Red-Green-Blue colour image to distinguish lithologies. Band ratio ${\frac{4}{2}}$ image displayed in red was used to highlight ferric-ion bearing minerals(hematite, goethite, jarosite) associated with hydrothermal alteration, band ratio ${\frac{5}{6}}$ image displayed in green was used to highlight ferrous-ion bearing minerals such as olivine, amphibole and pyroxenes, while ratio ${\frac{6}{7}}$ image displayed in blue was used to highlight clay minerals, micas, talc-carbonates, etc. Band rationing helped to reduce the topographic illumination effect within images. The result of this study showed the distribution of the lithological units and the hydrothermal alteration zone which can be further prospected for mineral reserves.