• New & Renewable Energy
• /
• v.8 no.2
• /
• pp.24-32
• /
• 2012

Natural gas hydrates have a high potential as the 21st century new energy resource, because it have a large amount of deposits in many deep-water and permafrost regions of the world widely. Natural gas hydrate is formed by physical binding between water molecule and gas mainly composed of methane, which is captured in the cavities of water molecules under the specific temperature and pressure. $1m^3$ methane hydrate can be decomposed to the methane gas of $172m^3$ and water of $0.8m^3$ at standard condition. Therefore, there are a lot of practical applications such as separation processes, natural gas storage transportation and carbon dioxide sequestration. For the industrial utilization of methane hydrate, it is very important to rapidly manufacture hydrate. However, when methane hydrate is artificially formed, its reaction time may be too long and the gas consumption in water becomes relatively low, because the reaction rate between water and gas is low. So in this study, hydrate formation was experimented by adding natural zeolite and Synthetic zeolite 5A in distilled water, respectively. The results show that when the Synthetic zeolite 5A of 0.01 wt% was, the amount of gas consumed during the formation of methane hydrate was higher than that in the natural zeolite. Also, the natural zeolite and Synthetic zeolite 5A decreased the hydrate formation time to a greater extent than the distilled water at the same subcooling temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.512-520
• /
• 2011

This study was preformed to investigate the characteristics of the green drying system for utilizing heat wasted during carbonization process. The green drying system utilizing waste heat is one of environment-friendly equipments because it needs no other energies from fossil fuel and etc. In this study, waste heat from three kilns was collected by stainless connection pipe, and in the green drying system the temperature and humidity was hardly changed. Charcoal charecteristics as fixed carbon, refining degree, hardness, pH, calorific value, and charcoal yield were analyzed to investigate kiln performance due to installation of green drying system. As a result, the green dry system installation hardly affected the characteristics of charcoal. In conclusion, the green drying system can be applied to maximize the profit of the farm household income and contribute to reduce fossil energy.

• Journal of Species Research
• /
• v.4 no.2
• /
• pp.127-136
• /
• 2015

As an outcome of the study on the bacterial species diversity in Korea, we report 24 unrecorded bacterial species of Korea belonging to the phylum Firmicutes. The unrecorded species excavated through this study were assigned to 12 different genera of 7 families, namely Bacillus, Halobacillus, Lysinibacillus and Thalassobacillus of Bacillaceae, Brevibacillus and Paenibacillus of Paenibacillaceae, Viridibacillus of Planococcaceae, Salinicoccus and Staphylococcus of Staphylococcaceae, Enterococcus of Enterococcaceae, Lactobacillus of Lactobacillaceae, and Lactococcus of Streptococcaceae, respectively. The bacterial isolates were obtained from various ecosystems in Korea. The isolates were identified based on 16S rRNA gene sequences, and those exhibiting at least 99% sequence similarity with known bacterial species but never reported in Korea were selected as unrecorded species. The selected isolates were subjected to further taxonomic characterization including the analysis of cell shape and fine structure using electron microscope, colony color and shapes, enzyme activities and carbon source utilization. The descriptive information on the 24 unrecorded species are provided.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.531-533
• /
• 2013

In this paper, to study the IPMC (Ionic exchange Polymer Metal Composite) material consisting of a sulfonic acid ion and fluoride combination of carbon with Nafion film greatly affected the electro-active polymer (Electro Active Polymer) characteristics and the presence of water and cationshave properties. Use or electrical energy into mechanical energy, mechanical energy, electrical energy, and can be utilized to its characteristics, depending on the water and cations in water varies greatly. Configure the device simulations in order to study the electrical properties of these IPMC. Stepper Motor using MCU and simulator designed for the electrical characterization due to the movement and to the implementation of the mechanical movement of ocean currents. In this study, configuration the IPMC and simulation device to the area of the IPMC to the efficient use of energy currents, frequency, salinity concentration, through the efficient use of the IPMC due to the bend angle of the electrical analysis and research methods we propose.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2000

Low density ceramic supporter was prepared by using fly ash as a starting material for the application to the biological aerated filter system. Wheat powders were used to control the porosity of the supporter and the carbon content of the raw material. Apparent density of 1.6~1.8 g/$\textrm{cm}^3$ was obtained when the fly ash was sintered at $1200^{\circ}C$ in a weak reducing atmosphere. By maintaining the reducing atmosphere and sintering at a high heating rate, the liquid phase was formed from the reduced composition of fly ash. This resulted in the closed pore formation which enabled the low apparent density.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.11
• /
• pp.2010-2018
• /
• 2017

Mixotrophic microalgal growth gives a great premise for wastewater treatment based on photoautotrophic nutrient utilization and heterotrophic organic removal while producing renewable biomass. There remains a need for a control strategy to enrich them in a photobioreactor. This study performed a series of batch experiments using a mixotroph, Chlorella sorokiniana, to characterize optimal guidelines of mixotrophic growth based on a statistical design of the experiment. Using a central composite design, this study evaluated how temperature and light irradiance are associated with $CO_2$ capture and organic carbon respiration through biomass production and ammonia removal kinetics. By conducting regressions on the experimental data, response surfaces were created to suggest proper ranges of temperature and light irradiance that mixotrophs can beneficially use as two types of energy sources. The results identified that efficient mixotrophic metabolism of Chlorella sorokiniana for organics and inorganics occurs at the temperature of $30-40^{\circ}C$ and diurnal light condition of $150-200{\mu}mol\;E{\cdot}m^{-2}{\cdot}s^{-1}$. The optimal specific growth rate and ammonia removal rate were recorded as 0.51/d and 0.56/h on average, respectively, and the confirmation test verified that the organic removal rate was $105mg\;COD{\cdot}l^{-1}{\cdot}d^{-1}$. These results support the development of a viable option for sustainable treatment and effluent quality management of problematic livestock wastewater.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.141-148
• /
• 2015

The presence of phenols in treated palm oil mill effluent (POME) is an environmental concern due to their phytotoxicity and antimicrobial activity. In this study, phenol-degrading bacteria, Methylobacterium sp. NP3 and Acinetobacter sp. PK1 were immobilized on oil palm empty fruit bunches (EFBs) for removal of phenols in the treated POME. The bacterial exopolysaccharides (EPS) were responsible for cell adhesion to the EFBs during the immobilization process. These immobilized bacteria could effectively remove up to 5,000 mg/L phenol in a carbon free mineral medium (CFMM) with a greater degradation efficiency and rate than that with suspended bacteria. To increase the efficiency of the immobilized bacteria, three approaches, namely activation, acclimation, and combined activation and acclimation were applied. The most convenient and efficient strategy was found when the immobilized bacteria were activated in a CFMM containing phenol for 24 h before biotreatment of the treated POME. These activated immobilized bacteria were able to remove about 63.4% of 33 mg/L phenols in the treated POME, while non-activated and/or acclimated immobilized bacteria could degrade only 35.0%. The activated immobilized bacteria could be effectively reused for at least ten application cycles and stored for 4 weeks at $4^{\circ}C$ with the similar activities. In addition, the utilization of the abundant EFBs gives value-added to the palm oil mill wastes and is environmentally friendly thus making it is attractive for practical application.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2005.06a
• /
• pp.245-247
• /
• 2005

A cellulolytic fungus isolated from Agave plantation in northeastern Thailand was identified as Acrophialophora nainiana. The fungus was capable of growing at pH between 3 - 7 and 25 - 45 $^{\circ}C$, with the optimum conditions at pH 5.0 and 40 $^{\circ}C$. The wild isolate produced cellulases, comprising of exoglucanase (0.019 U/mg protein), endoglucanase (0.366 U/mg protein), and ${\beta}$-glucosidase (0.001 U/mg protein). Mutations with UV and NTG produced the UV 10-2 mutant with cellulases activities including exoglucanase (0.093 U/mg protein), endoglucanase (0.585 U/mg protein), and ${\beta}$-glucosidase (0.013 U/mg protein). Purification of the enzymes with ultrafiltration, ammonium sulfate precipitation, and ion-exchange chromatography yielded the maximal cellulase specific activities of 2.736 U/mg protein (exoglucanase), 0.235 U/mg protein (endoglucanase), and 0.008 U/mg protein (${\beta}$-glucosidase). The mutant's cellulases were the most active at pH 5.0 and 60 $^{\circ}C$. Ion-exchange chromatography revealed that A. nainiana UV 10-2 cellulases were comprised of two peaks with one peak showing the single endoglucanase activity while the other peak showed a mixture of the three enzyme activities. Production of A. nainiana UV 10-2 cellulases using banana leaf stalk as the sole carbon source gave comparable yields to that of the pure ${\alpha}$-cellulose. The enzymes were used in the simultaneous saccharification and fermentation (SSF) of plant residue (Coix aquatica) along with Kluveromyces marxianus to produce ethanol. Moreover, when the enzymes were used in the bioscouring process of fabric, the desiravle traits of textile processing including immediate water absorbency, increased in whiteness and reduction of yellowness of the treated fabric were observed.

• Microbiology and Biotechnology Letters
• /
• v.5 no.3
• /
• pp.119-125
• /
• 1977

The cultivation of C. flavigena KIST 321, capable of utilizing cellulosic resources, was carried out in a 500 L fermentor by the batch process and the productivities of cellulosic SCP have been investigated by establishing the optimal conditions and levels of cellulosic material and others as medium components. The highest yield of the cell mass in the batch process was atttained under tile conditions at 30$^{\circ}C$, pH 7.4, 0.4∼0.6 VVM of aeration and at 130 rpm of agitation. According to the material balance of cellulosic SCP production using tile pretreated rice straw as a carbon source, more than 25 percent of rice straw on the base of drying weight was recovered in the form of cell mass.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.333-338
• /
• 2012

To verify the utilization of fluff refuse derived fuel (RDF) as energy source, the combustion charateristic has been studied by an experimental combustion furnace under various temperatures. The characteristics of flue gas, dust and residue from fluff RDF combustion has been analyzed and compared with those of pelletized RDF. From this work, it was found that the incomplete combustion of fluff RDF was greater than that of pelletized RDF because the combustion reaction rate of fluff RDF was faster than that of pelletized RDF, and oxgen concentration in fluff RDF combustion decreased rapidly. It was also found that carbon monoxide concentration of flue gas from fluff RDF combustion increased with combustion temperature because the oxygen consumption and the incomplete combustion increased. Therefore, it is felt that the combustion operation conditions of fluff RDF should be carefully determined.