• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1059-1064
• /
• 2003

This paper presents an overview of the mechanical properties of carbon nanotubes. The characteristics of carbon nanotubes were briefly introduced. We then present briefly the experimental techniques used to measure mechanical properties and the results obtained by other researchers. A carbon nanotube is too small to be pulled apart with standard tension devices. Manipulators should be used for mechanical testing. We introduced manipulation methods using nanomanipulators under field-emission scanning-electron microscope.

• Carbon letters
• /
• 제11권4호
• /
• pp.336-342
• /
• 2010

Different oxidation treatments on CNTs using diluted 4.0 M $H_2SO_4$ solution at room temperature and or at $90^{\circ}C$ reflux conditions were investigated to elucidate the physical and chemical changes occurring on the treated CNTs, which might have significant effects on their performance as catalyst supports in PEM fuel cells. Raman spectroscopy, X-ray diffraction and transmission electron microscope analyses were made for the acid treated CNTs to determine the particle size and distribution of the CNT-supported Pt-Ru nanoparticles. These CNT-supported Pt-based nanoparticles were then employed as anode catalysts in PEMFC to investigate their catalytic activity and single-cell performance towards $H_2$ oxidation. Based on PEMFC performance results, refluxed Pt-Ru/CNT catalysts prepared using CNTs treated at $90^{\circ}C$ for 0.5 h as anode have shown better catalytic activity and PEMFC polarization performance than those of the commercially available Pt-Ru/C catalyst from ETEK and other Pt-Ru/CNT catalysts developed using raw CNT, thus demonstrating the importance of acid treatment in improving and optimizing the surface properties of catalyst support.

• Advances in nano research
• /
• 제12권3호
• /
• pp.253-261
• /
• 2022

Numerical modelling of an integrated Carbon NanoTube (CNT) membrane is only achievable if probable deformations and realistic alterations from a perfect CNT membrane are taken into account. Considering the possible forms of CNTs, bending is one of the most probable deformations in these high aspect ratio nanostructures. Hence, investigation of effect associated with bent CNTs are of great interest. In the present study, molecular dynamics simulation is utilized to investigate fluid flow dynamics in deformed CNT membranes, specifically when the tube cross section is not affected. Bending in armchair (5,5) CNT was simulated using Tersoff potential, prior to flow rate investigation. Also, to study effect of inclined entry of the CNT to the membrane wall, argon flow through generated inclined CNT membranes is examined. The results show significant variation in both cases, which can be interpreted as counter-intuitive, since the cross section of the CNT was not deformed in either case. The distribution of fluid-fluid and fluid-wall interaction potential is investigated to explain the anomalous behavior of the flow rate versus bending angle.

• Composites Research
• /
• 제28권4호
• /
• pp.226-231
• /
• 2015

CNT(carbon nanotubes) 강화 알루미늄 나노복합재는 우수한 기계적 특성으로 자동차용 차세대 경량재료로 주목을 받고 있으나 소재 제조 과정에 있어 CNT의 균일 분산 확보가 어렵고 대량제조 공정 확립이 어려워 자동차 부품으로의 적용이 어렵다. 그러나 점차 CNT 생산이 대량화 되고 있고 복합재로서의 특성이 개선되고 있다. 따라서 본 연구는 CNT강화 알루미늄 나노복합재의 현 수준을 확인하고 자동차 부품 관점에서의 적용가능성을 검토하고자 하였다. 평가에 사용된 소재는 20L급 High energy milling기에서 알루미늄 분말과 CNT를 혼합한 후, 소결 및 압출하여 봉상(${\phi}80$)으로 제조되었다. 소재 관점에서 기계적 특성 및 열적 특성을 분석하였으며, 부품 적용성 관점에서는 현재 자동차 부품에 사용되는 소재와 그 소재가 사용되는 각 부품의 주요 요구 특성을 상대 비교하였다. 고강성과 성형성이 요구되는 부품에 사용되는 상용소재(A390) 및 SiC/Al 복합재와 성형성 비교평가를 진행하였으며, 탄성계수를 측정하였다. 피로 내구 및 경량화가 요구되는 메인베어링캡 양산소재와의 내구성 비교 평가를 실시하였다. 또한 고온 안정성이 요구되는 피스톤용 내열 소재와 열팽창계수 및 열화에 따른 강도저하를 비교 평가하였다. 구배가 큰 금형을 설계하여 단조 가공 후, 성형성(외관 crack 및 성형압 측정)을 비교하였으며, 내구성 평가를 위해 실제 부품인 H사(社) 소형 엔진블록의 메인베어링 캡을 적용하여 일축 단품 피로 시험을 진행하였다. 이를 통해 우수한 소재 특성을 확인하였고, 자동차 구조용 부품으로 적용이 가능함을 확인하였다.

• 전기화학회지
• /
• 제22권3호
• /
• pp.112-121
• /
• 2019

본 연구에서는 마이크로 크기의 실리콘 입자와 탄소나노튜브를 활용하여 고용량을 갖는 실리콘/탄소나노튜브/탄소 복합입자를 제조하여 리튬이차전지용 음극활물질로서의 적용가능성을 확인하고자 하였다. 실리콘/탄소나노튜브/탄소 복합입자 제조를 위해 분무건조 방식을 이용하여 실리콘입자가 탄소나노튜브에 의해 균일하게 분산되어 비정질탄소로 결합된 구조를 갖는 구형의 복합입자를 제조하였다. 제조한 복합입자는 실리콘 입자 주변에 탄소나노튜브의 네트워크 구조를 형성하며 비정질 탄소에 의해 실리콘 입자와 탄소나노튜브의 입자들이 결합한 상태를 유지하는 구조로 이루어진다. 이러한 복합입자의 구조적인 특성으로 인해 계속적인 충방전 과정에서 실리콘의 부피팽창이 효과적으로 완충되고 이에 따라 전기적 접촉 손실 및 SEI 막 형성에 따른 비가역 반응이 제어되어 우수한 수명 특성 및 충전출력 특성을 갖는 것으로 나타난다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.997-1000
• /
• 2004

This paper introduces our basic research about a carbon nanotube(CNT) sample for the fabrication of nanotweezer. We have made the nanotweezer through the physical adhesion of multi-walled carbon nanotubes(MWCNTs) on two sharp tungsten tips. Thereby we needed the CNT sample which is proper to this fabrication process. And we applied the dielectrophoretic methods to the fabrication of the CNT sample. During the basic experiment, we used a sharp edged electrode and a flat electrode as electrodes for dielectrophoresis and just a function generator as a voltage source for the generation of electric field.

• 한국분말재료학회지
• /
• 제20권4호
• /
• pp.291-296
• /
• 2013

SKD11 (ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. The CNTs was good additives to improve the mechanical properties of metal. In this study, 1, 3 vol% CNTs was dispersed in SKD11 matrix by mechanical alloying. The SKD11+ CNT hybrid nanocomposites were investigated by FE-SEM, particle size distribution, hardness and wear resistance. The CNT was well dispersed in the SKD11 matrix and the mechanical properties of the composite were improved by CNTs addition. It shows good feasibility as cold work die tool.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.487-488
• /
• 2011

• 한국전기전자재료학회논문지
• /
• 제21권7호
• /
• pp.594-598
• /
• 2008

The metal catalyst particles which there is as impurities on a tip part of carbon nanotube (CNT) are not good to apply it to a nano-electronic device. It was very important the opening of CNT-tip to fix a target bio material and a material to accept in CNT in a biosensor, so we performed $HNO_3$ wet etching to remove the metal catalyst particle which there was on a tip part of CNT grown up in the study and observed the opened CNT-tip with etching time. We synthesized the CNTs using a HF-PECVD method and choses the CNT length of 700 nm for the application of nano-electronic device such as a biosensor etc.. We observed the opened CNT-tip with wet etching times of $HNO_3$ (10, 30, 60 min). From the results, we observed that the CNT-tip was opened with the increase of wet etching time lively. In case of CNTs etched during 60 min, we confirmed that there was not the ratio of Ni included in CNTsI as catalyst. Conclusively, in the case of CNT etched for 60 minutes, it is completely good for application of a biosensor and, in addition, the metal-free CNTs will contribute to the application of other nanoelectronic devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.256-256
• /
• 2013

Carbon nanotubes (CNT) / polyvinylidene fluoride (PVDF) piezoelectric composite films for nanogenerator devices were fabricated by spray coating method. When the CNT/PVDF mixture solution passes through the spray nozzle with small diameter by the compressed nitrogen gas, electric charges are generated in the liquid by a triboelectric effect. Then randomly distributed ${\beta}$ phase PVDF film could be re-oriented by the electric field resulting from the accumulated electrical charges, and might be resulted in extremely one-directionally aligned ${\beta}$ phase PVDF film without additional electric field for poling. X-ray diffraction patterns were used to investigate crystal structure of the CNT/PVDF composite films. It was confirmed that they revealed extremely large portion of the ${\beta}$ phase PVDF crystalline in the film. Therefore we could obtain the poled CNT/PVDF piezoelectric composite films by the spray coating method without additional poling process. Charge accumulation and resulting electric field generation mechanism by spray coating method were shown in Fig. 1. The capacitance of the CNT/PVDF films increased by adding CNTs into the PVDF matrix, and finally saturated. However, the I-V curves didn't show any saturation effect in the CNT concentration range of 0~4 wt%. Therefore we can control the performance of the devices fabricated from the CNT/PVDF composite film by adjusting the current level resulted from the CNT concentration with the uniform capacitance value.