• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.183-186
• /
• 2004

Nano particles-containing CMS membranes were prepared by pyrolysis of polyimides dispersed uniformly with precursors and their gas separation performances were examined, to elucidate the permeation mechanism and to further improve the gas separation performance. Consequently, it was suggested that the separation performance could be controlled by doping nano-particles in the CMS membranes, and that optimization of various factors, such as the size, content, and dispersion state of the nano particles would contribute for further improvement of the gas separation performance.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.25-35
• /
• 2002

The gas permeation properties have been studied on carbon molecular sieve (CMS) membranes prepared by pyrolysis of P84 polyimide under various conditions. P84 polyimide shows high permselectivities (O$_2$/N$_2$= 9.17 and CO$_2$/N$_2$= 35) for various gas pairs and has a good processibility because it is easily soluble in high polar solvents such as N-methylpyrrolidinone (NMP), dimethylformamide (DMF), and N,N-dimethylacetamide (DMAc). After pyrolysis under Ar flow, the change in the heating rate was found to affect the gas permeation properties to some extent. The permeabilities of the selected gases were shown to be in the order He ＞ CO$_2$＞ O$_2$＞ N$_2$for all the CMS membranes, whose order was in accordance with the order of kinetic gas diameters. It also revealed that the pyrolysis temperature considerably influenced the gas permeation properties of the CMS membranes derived from P84 polyimide. The CMS membranes pyrolized at 700$\^{C}$ temperature exhibited the highest permeability with relatively targe loss in permselectivity. This means that the pyrolysis temperature should be varied in accordance with target gases to be separated.

• 멤브레인
• /
• 제11권1호
• /
• pp.1-13
• /
• 2001

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.39-47
• /
• 2005

• 멤브레인
• /
• 제7권1호
• /
• pp.15-21
• /
• 1997

Carbon molecular sieve (CMS) membranes were synthesized by the pyrolysis of polymeric precursors. The CMS materials had oxygen-nitrogen selectivities much higher than those observed for the polymeric precursors. Typically molecular sieving materials have diffusion selectivities much higher than polymeric materials. This has been identified as a result of higher entropic selectivity of the molecular sieving materials. A study of the development of molecular sieving properties as the polymeric precursor is pyrolyzed into a CMS material will offer us an insight into polymeric molecular structures needed for enhanced entropic selectivity membrane materials.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2001년도 춘계 총회 및 학술발표회(한국막학회)
• /
• pp.59-62
• /
• 2001

• 멤브레인
• /
• 제30권4호
• /
• pp.260-268
• /
• 2020

다층 구조를 가진 5A 제올라이트를 탄소 분자체 분리막에 첨가한 복합막을 제조하고 질소/산소의 분리 특성을 평가하였다. 제올라이트의 첨가는 선택도에는 미세한 영향을 주지만 투과도를 크게 증가시키는 방법으로 전체적인 탄소막의 질소/산소의 분리 성능을 상승시켰다. 특히 메조포어를 함유한 다층구조의 제올라이트 첨가제는 분리막의 투과도를 보다 효율적으로 상승시켜 아주 우수한 분리 성능에 도달하였다. 이 연구의 결과는 저렴한 탄소막 전구체와 제올라이트 소재를 활용하고도 고성능의 질소/산소 분리막을 손쉽게 제조할 수 있다는 것을 제시한다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.169-171
• /
• 2004

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 추계 총회 및 학술발표회
• /
• pp.88-92
• /
• 2002

No Abstract, See Full Text

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.77-80
• /
• 2002

No Abstract, See Full-text