• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.226-230
• /
• 2008

A comparison was made of the effect of different packaging materials on storability of mixed sprout vegetables (alfalfa, broccoli, cabbage, radish, and red radish) stored at $8^{\circ}C$. They were packaged by several kinds of films that were 50 fm thickness low-density polyethylene film (PE 50), 50 fm thickness polypropylene film (PP 50), $50{\mu}m$ thickness ceramic film (CE 50), $25{\mu}m$ thickness ceramic film (CE 25), $10\sim13{\mu}m$ thickness polyethylene film (wrap), and polyethylene terephthalate box with ventilation hole (box). The fresh weight of mixed sprouts packaged with different materials decreased below to 2% except box packages that decreased around 7% compared with initial weight. The atmospheres that were developed inside the different materials during storage differed significantly. The carbon dioxide and oxygen concentration of packages were kept properly with 5% in CE 25, but the PE 50 and CE 50 treatments showed higher carbon dioxide and lower oxygen concentration. So the off-flavor of mixed sprouts was more severe in the PE 50 and CE 50 treatment. The ethylene concentration of packages showed lowest in box treatment, followed by PP 50, wrap and CE 25 treatment. The overall quality of mixed sprouts was lower in PE 50 and CE 50 than CE 25 treatment after 10 days storage, supposed to be resulted from highest ethylene concentration and lowest oxygen concentration. Conclusionally, the CE 25 film that showed below 1% fresh weight loss, 5% carbon dioxide, 5% oxygen and below 4 ppm ethylene concentration in package may be a proper packaging material for mixed sprout vegetables.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.158-161
• /
• 2003

To develop an effective adsorbent for radio active Carbon Dioxide, $^14CO_2$, which is discharged to nearby atmosphere from nuclear power plants of CANDU type, we made some preliminary adsorbents and tested their abilities of $CO_2$ removal. The chemical agents used was LiOH and we supported or impregnated it on the surface or the internal volume of activated Carbon(GW-H). The physical and chemical properties of various adsorbents were measured using methods such as XRD, BET. SEM images were taken to investigate the change of surface morphology of the adsorbents. Finally, amount of $CO_2$ adsorption of them were verified under specific conditions. We found that mechanical mixing of LiOH and activated Carbon showed the maximum $CO_2$ removal ability, while surface activation of activated Carbon by Nitric Acid-treatment enhanced its $CO_2$ removal efficiency to some degree.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.493-501
• /
• 2004

The principle of vortex tube and cyclone was introduced to enhance the treatment efficiency of waste air streams containing particulate matters, toluene, and others developed by Hangreen Tech, Ltd. and Hoseo Chemical and Industrial Technology R＆D Center. Adsorption, condensation, and/or coagulation could be induced at low temperature zone formed by vortex tube and Joule-Thomson expansion. The pressurized air was introduced at the tangential direction into the cyclone system applied with the coaxial funnel tube. Easily condensible vapors such as toluene. carbon dioxide, and water vapor were adsorbed enforcedly on coagulated or condensed materials which were formed as cores for coagulation or condensation by themselves. These types of coagulation or condensation rates were rapidly promoted as the diameter being growing up. The maximum removal efficiency for carbon dioxide and toluene was achieved to about 87 and 90 percent, respectively. The Joule-Thomson coefficients were increased with the pressure of air injected in the range of the relative humidities between 10% and 30%. An optimum value was observed within the range of the tested temperatures at a fixed pressure. In conclusion. it could be identified that the treatment efficiency would be depended on the pressure of the process air introduced and physical and chemical characteristics of waste air streams containing target materials for a designed system. The final design parameters should be decided depending upon the given system and target materials.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.549-554
• /
• 2015

This study was conducted to determine the effects of mixed Korean red ginseng marc with aluminum sulfate on gas concentration and volatile fatty acid (VFA) in poultry litter during 4 weeks in terms of livestock and environment managements. A total of 240 broiler chicks were randomly allocated to four treatments in four replications and 15 birds per replicate. The four treatments was mixed to rice hull under each pen at 0, 10 g or 20 g red ginseng marc + 90g aluminum sulfate, and 100g aluminum sulfate per kg poultry litter (rice hulls). Carbon dioxide, methane, acetic acid, and propionic acids were measured weekly. The results that could be available include: First, during the experimental period, carbon dioxide emissions were not remarkably different among treatments. Second, no differences were observed among treatments in methane emissions at 2 weeks through 4 weeks, but at 1 week, the reduction in methane emissions was in following order: 100 g aluminum sulfate > 20 g red ginseng marc + 90 g aluminum sulfate > 10 g red ginseng marc + 90 g aluminum sulfate > control. Third, in spite of statistically differences, treatment with 10 g or 20 g red ginseng marc + 90g aluminum sulfate, and 100g aluminum sulfate reduced acetic acid and propionic acid as a function of time, except acetic acid in aluminum sulfate treatment at 2 and 4 weeks. In conclusion, the results indicated that like aluminum sulfate, using 10 g or 20 g red ginseng marc with aluminum sulfate was effective in decreasing methane and propionic acid released from poultry litter.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.204-208
• /
• 2017

Highly uniform and well-dispersed Zeolitic Imidazolate Framework-7 (ZIF-7) particles were prepared by the precipitation of $Zn^{2+}$ using benzimidazole, which were converted into ZnO nanoparticles by heat treatment at $500^{\circ}C$ for 24 h. The ZIF-7 derived ZnO nanoparticles showed abundant mesopores, high surface area, and good dispersion. The gas sensing characteristics toward 5 ppm acetone, ethanol, trimethylamine, ammonia, p-xylene, toluene, benzene, and carbon monoxide and carbon dioxide were investigated at $350-450^{\circ}C$. ZIF-7 derived ZnO nanoparticles exhibited high response to 5 ppm acetone ($R_a/R_g=57.6$; $R_a$: resistance under exposure to the air, Rg: resistance under exposure to the gas) at $450^{\circ}C$ and negligible cross-responses to other interference gases (trimethylamine, ammonia, p-xylene, toluene, benzene, carbon monoxide, carbon dioxide) and relatively low responses to ethanol. ZIF derived synthesis of metal oxide nanoparticles can be used to design high performance acetone sensors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.714-718
• /
• 2003

Usually for the commercial preparation of barium titanate films or ceramics the reaction atmosphere must be preferably in air. However, normally air is not used because it contains carbon dioxide, which can easily react with barium to form the undesired product barium carbonate, leading to unwanted second-phase formation in the (mal stages of the process. In the present work a series of perovskite barium titanate films was prepared by the sol-gel method, using a metal alkoxide solutions in the electrophoretic deposition (EPD). The influence of several process parameters, like sintering temperature of sol preparation before EPD and heat-treatment temperature and non-oxidized atmosphere, on the film properties is described.

• 보존과학연구
• /
• s.34
• /
• pp.84-99
• /
• 2013

There are more than 2,900 different species of termites in the world, and just there are 23 species in Japan. They caused more severe infestation compared with Korea. When a structure has become infested with termites, it is important that appropriate action must be taken: the chemical pest control (fumigation, soil termiticide treatment, bait system etc.) or the non-chemical pest control (low oxygen treatment, carbon dioxide treatment, high/low temperature treatment etc.). Especially, there were attempts to make practical protocol of various alternatives since the fumigant(methyl bromide) had been phased out in 2005 in Japan, and practically non-chemical methods would be effective alternatives for some cases, where the scale of infestation is small and limited and when long treatment is possible. But most of all, it is important that the process of pest control is made according to each species of termites with consideration for different characteristics of termites.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.62-63
• /
• 2010

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.54-63
• /
• 2018

We investigated the effect of $CO_2$ exposure on the reproductive process of chameleon goby Tridentiger trigonocephalus. Rearing aquaria were exposed for 90 days to $CO_2$ gas through diffuser connected with pH controller maintaining at pH 7.2 ($156.31{\pm}7.90ppm$) in low treatment, and at pH 6.5 ($274.17{\pm}6.51ppm$) in high treatment. $CO_2$ treatment had no significant effects on survival rates although the value was decreased compared to the controls. In female fish, $CO_2$ treatment had no significant effects on gonadosomatic index (GSI), hepatosomatic index (HSI) and condition factor (CF). However, high $CO_2$ treatment decreased HSI and CF in males significantly compared to the controls (P<0.05). The spawning occurrence was 6 times in the low level $CO_2$ treatment, and 4 times in the high level $CO_2$ treatment although only once in the controls. For the histological observations, there was no significant difference in $CO_2$ treatments. However, in male fish, $CO_2$ treatment delayed the formation of sperm from spermatid compared to controls. These results suggest $CO_2$ may disrupt reproductive process by delaying gametogenesis in chameleon goby and it was more sensitive in males.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.38-44
• /
• 2017

As by-pass dust (BPD) made from cement manufactured process is designated waste, it is required to bury as high cost. The main component of BPD is potassium chloride (KCl), and used for the fertilizer. For using KCl to the fertilizer, the pH value of KCl is required as neutral or weak acid. However, it is not suitable to apply BPD into the fertilizer directly without any other treatment because BPD's pH value is shown 12.0~12.5; a high base. In this study, the carbon dioxide ($CO_2$) was used for removing calcium oxide (CaO) and reducing pH value during manufacturing process of KCl. We fixed inner condition of the carbon test chamber as $25^{\circ}C$-50RH%, and retained 0~7 hours under the 20 vol% of $CO_2$ atmosphere. After experiment, we analyzed the content of CaO and pH value from each samples. The more time exposed to $CO_2$, the content of CaO and pH value are shown. Furthermore, pH value exposed in 6 hours nearly reached 7.