• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.568-573
• /
• 2011

Carbon dioxide concentration of railroad passenger cabin is obliged to be kept lower than guideline values of 'Indoor air quality guideline for public transportations', but actual carbon dioxide concentration frequently exceeds this guideline value. Ventilation is most desirable to lower carbon dioxide concentration but there are some cases when the ventilation is not applicable. In this study, carbon dioxide concentration control method using adsorbents was presented. The cation of zeolites were exchanged with various kinds of cations, and the carbon dioxide adsorption performance of the zeolites were studied. The various kinds of cations, solvents, and zeolites were introduced, and it was found that some cation-exchanged zeolites showed good carbon dioxide adsorption performances. It is expected that the obtained results will be used to lower carbon dioxide concentration of railroad passenger cabin.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.17-24
• /
• 2021

새로운 이산화탄소 분리용 흡착제 개발은 흡착속도, 소수성, 상용 흡착제보다 낮은 재생온도 등을 고려하여야 한다. 본 연구에서는 CO2를 분리하기 위하여 아미노실란이 그라프팅된 활성탄을 합성하였다. 아민 작용기 전구체로 methyltrimethoxysilane(MTMS) and 3-Aminopropyl-triethoxysilane(APTES)을 사용하여 그라프팅하였다. APTES를 그라프팅 활성탄이 MTMS을 사용한 것보다 우수한 흡착 특성을 나타내었다. 온도 및 이산화탄소 분압에 따른 흡착 특성으로 이산화탄소 분리 메커니즘을 규명하였다. 이산화탄소의 흡수/흡착능은 25 ℃에서 아민 그라프팅 활성탄과 활성탄과 비슷하지만 아민 그라프팅 활성탄이 75 ℃에서 더 높게 나타났다. 아민 작용기 그라프팅 활성탄은 이산화탄소 분압이 1 % 인 조건에서 활성탄보다 더 우수한 흡수능을 나타내었다. 아미노실란 그라프팅 활성탄은 물리적 흡착 특성을 지닌 화학적 흡수 메카니즘을 나타내었다. 아민 작용기가 부여되어 개질된 고체상 흡수/흡착제는 이산화탄소 흡착/흡수 공정만 아닌 재료 관련 산업에 큰 영향을 미칠 수 있는 고성능 복합 재료이며, 개발된 흡착제는 흡수/흡착 및 분리 관련 산업 공정에 적용될 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.146-147
• /
• 2021

An increase in carbon emissions leads to the problem of global warming and is an issue to be solved in other countries. The problem of carbon dioxide has many effects not only on global warming but also on people. According to the World Health Organization (WHO), 4.3 million people have died because harmful substances generated indoors cannot be discharged to the outside and accumulate in the human body through the respiratory tract. In response to this situation, in order to reduce the generation of pollutants in the building itself, soak into lightweight bubble concrete to adsorb and purify indoor pollutants, mix charcoal, investigate the appropriate amount and physical characteristics, and check carbon dioxide This is an experiment for grasping the adsorption capacity, and the results are as follows. As the replacement rate of rice husk charcoal increased, the compressive strength tended to decrease, and the carbon dioxide reduction rate tended to increase. It is judged that the charcoal of rice husks shows a low density and the physical adsorption is smooth due to the porous structure. Since it is excellent in the basic physical properties and carbon dioxide adsorption surface of this experiment, it is judged that it has sufficient potential for use as an indoor finishing material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.189-190
• /
• 2020

The importance of indoor air quality management has recently been highlighted due to environmental problems such as indoor air pollution. Among indoor air pollutants, carbon dioxide occurs in cooking, heating, burning, and causes forgetfulness, dementia and amnesia. Radon, which occurs in building materials, soil and ground, is a type 1 carcinogen that causes lung cancer in the body through breathing. These substances can be released from the room through ventilation, but there is a limit to reducing the amount of indoor activity due to reduced ventilation conditions due to increased indoor activity time. However, these substances can be removed from the gas by adsorption. The purpose of this study was to identify the properties of granular active and powdered active white soil and mix them to make cement-based active white soil adsorbent matrix for carbon dioxide, fine dust and radon gas adsorption, and to evaluate indoor air improvements according to the mixing scale. The results of the experiment showed that active carbon dioxide adsorption performance increased for carbon dioxide and radon as the exchange rate increased through physical adsorption. In particular, the higher the replacement rate of the granular active bag, the better adsorption performance was shown.

• 한국포장학회지
• /
• 제24권3호
• /
• pp.149-157
• /
• 2018

Low density polyethylene (LDPE) has been researched in many industrial applications, and LDPE/zeolite 4A composites has been extensively studied for many applications such as microporous, breathable film and so on. LDPE/zeolite composite have a great potential for carbon dioxide adsorption film due to its high adsorption ability. In this study, LDPE/zeolite 4A composites with various contents were prepared by melt mixing process, and co-extrusion process was applied to develop a $CO_2$ adsorption conventional film and foamed film. The thermal, rheological, mechanical, physical and morphological properties of composite films has been characterized, and $CO_2$ adsorption of the composite films evaluated by thermogravimetric analysis (TGA) and the performance was found to be about 18 cc/g at 30.9 wt% of the zeolite content.

• 공업화학
• /
• 제34권6호
• /
• pp.576-583
• /
• 2023

본 연구는 돼지 뼈 기반의 바이오매스를 가지고 새로운 흡착재의 활용가능성을 조사하였다. 이를 위하여 돼지 뼈 기반 활성탄소(pig bone based activated carbon, PAC)의 물리화학적 특성을 확인하고 이산화탄소 흡착 성능을 고찰하였다. 활성화제로 KOH를 사용하였으며, 활성화 온도가 증가할수록 비표면적이 증가하며 이산화탄소의 흡착 효율도 증가하였다. 800 ℃에서 활성화된 샘플은 1208.7 m²/g로 가장 큰 비표면적을 나타내었으며, 273 K, 1 bar에서 3.33 mmol/g로 높은 이산화탄소 흡착 효율을 보였다. 그러나 활성화 온도가 900 ℃ 이상인 조건에서는 결정성의 변화 및 과활성화로 인하여 비표면적과 이산화탄소 흡착 효율이 감소하였다. 한편 이상흡착용액이론으로 그 선택도 계산을 수행하였을 때, 273 K, 0.8 bar 이하에서 PAC-900 샘플이 가장 좋은 선택도를 보였다. 이러한 결과는 273 K에서의 이산화탄소/질소 흡착은 900 ℃에서 돼지 뼈가 활성화될 때 탄산염이 분해됨으로써 형성된 하이드록시아파타이트의 이산화탄소 흡착성과 그 결정성으로 인해 높은 선택도가 얻어진 것으로 판단된다.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.289-292
• /
• 2014

The effect of carbon dioxide ($CO_2$) on global warming is serious problem. The adsorption with solid sorbents is one of the most appropriate options. In this study, the most interesting adsorbent is granular activated carbon (GAC). It is suitable material for $CO_2$ adsorption because of its simple availability, many specific surface area, and low-cost material. Afterwards, GAC was impregnated with chitosan solution as impregnated granular activated carbon (CGAC) in order to improve the adsorption capacity of GAC. This research aims to compare the physical and chemical characteristics of GAC and CGAC. The experiment was carried out to evaluate the efficiency of $CO_2$ adsorption between GAC and CGAC. The results indicated that the iodine number of GAC and CGAC was 137.17 and 120.30 mg/g, respectively. The Brunauer-Emmett-Teller results (BET) of both GAC and CGAC show that specific surface area was 301.9 and $531.3m^2/g$, respectively; total pore volume was 0.16 and $0.29cm^3/g$, respectively; and mean diameter of pore was 2.18 and 2.15 nm, respectively. Finally, the $CO_2$ adsorption results of both GAC and CGAC in single column how the maximum adsorption capacity was 0.17 and 0.25 mol/kg, respectively; how degeneration time was 49.6 and 80.0 min, respectively; and how the highest efficiency of $CO_2$ adsorption was 91.92% and 91.19%, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.283-285
• /
• 2014

• 공업화학
• /
• 제20권6호
• /
• pp.663-669
• /
• 2009

지구온난화에 가장 큰 영향을 미치는 이산화탄소를 연소 후 배가스로부터 흡착 분리하기 위한 허니컴 흡착소자의 제조 및 그 특성에 관한 것이다. 고온사용이 가능하도록 세라믹쉬트, 활성탄소 쉬트를 사용하여 허니컴을 제조하였고 그 위에 Na-X 제올라이트를 코팅하였다. 또한 Na-X 제올라이트를 포함시킨 제올라이트 쉬트를 사용하여 허니컴 흡착제를 제조하였다. 이들 세 가지 허니컴 흡착제에 대하여 이산화탄소 흡착량, 표면특성 그리고 16% 이산화탄소 혼합가스를 공급하여 파과특성을 분석하였다. 또한 가열재생에 따른 이산화탄소 농축특성과 가열시 허니컴 흡착제의 온도변화를 분석하여 열스윙 흡착 분리공정에서의 우월성을 비교 분석하였다. 이들 허니컴을 사용한 흡착파과실험 결과를 바탕으로 하여 회전식 흡착 농축공정의 적용 가능예를 보여주었다.

• 한국수소및신에너지학회논문집
• /
• 제21권1호
• /
• pp.72-79
• /
• 2010

This paper is studying the selective separation of methane and carbon dioxide which are the main ingredients of biogas. Adsorption performance of molecular sieve 13x for carbon dioxide seems to be reasonable. In this experiments carbon dioxide contains about 3~5 ppm of methane and it is impossible to obtain high purity carbon dioxide. Applying the low temperature technique, it is possible to separate methane and carbon dioxide from bio gas. PRO II simulation shows results a small change of liquefaction temperatures and no difference with the used thermodynamic models. Applying low temperature technique, It is possible to separate carbon dioxide and methane from biogas.