• 한국표면공학회지
• /
• 제47권2호
• /
• pp.75-80
• /
• 2014

Nanocrystalline diamond(NCD) films on steel(SKH51) has been investigated using SiC interlayer film. SiC was deposited on SKH51 or Si wafer by RF magnetron sputter. NCD was deposited on SiC at $600^{\circ}C$ for 0.5~4 h employing microwave plasma CVD. Film morphology was observed by FESEM and FIB. Film adherence was examined by Rockwell C adhesion test. The growth rate of NCD on SiC/Si substrate was much higher than that on SiC/SKH51. During particle coalescence, NCD growth rate was slow since overall rate was determined by the diffusion of carbon on SiC surface. After completion of particle coalescence, NCD growth became faster with the reaction of carbon on NCD film controlling the whole process. In the case of SiC/SKH51 substrate, a complete NCD film was not formed even after 4 h of deposition. The adhesion test of NCD/SiC/SKH51 samples revealed a delamination of film whereas that of SiC/SKH51 showed a good adhesion. Many voids of less than 0.1 ${\mu}m$ were detected on NCD/SiC interface. These voids were believed as the reason for the poor adhesion between NCD and SiC films. The origin of voids was due to the insufficient coalescence of diamond particles on SiC surface in the early stage of deposition.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.5-12
• /
• 2000

Silicon carbide(SiC)는 뛰어난 전기적, 열적, 물리적 특성 때문에 내환경 전자소자용 반도체 재료로 널리 연구되고 있다. 본 연구에서는 화학기상증착법으로 단결정 6H-SiC 동종박막을 성장시키고 이의 성장 특성을 조사하였다. 특히, 몰리브덴 (Mo)-plate를 이용하여 SiC를 코팅하지 않은 graphite susceptor를 사용한 6H-SiC 동종박막 성장조건을 성공적으로 얻었다. 대기압 상태의 RF-유도가열식 챔버에서 CVD성장을 수행하였고, <1120> 방향으로 $3.5^{\circ}$off-axis된 기판을 사용하였다. 성장 박막의 결정성을 평가하기 위하여 Nomarski 관찰, 투과율 측정 , 라만 분광, XRD, 광발광(PL) 분광, 투과전자현미경(TEM) 측 정 등의 방법을 이용하였다. 이상과 같은 실험을 통하여, 본 연구에서는 성장온도 $1500^{\circ}C$, C/Si flow ratio ($C_3H_8$ 0.2 sccm, $SiH_4$ 0.3 sccm)인 성장조건에서 결정성이 가장 좋은 6H-SiC 동종박막을 얻을 수 있었다.

• 디지털콘텐츠학회 논문지
• /
• 제14권1호
• /
• pp.35-40
• /
• 2013

연마재와 Coolant를 이용한 슬러리는 그동안 반도체 웨이퍼를 시작으로 태양광 산업의 Wire Saw에서 사용량이 급격히 증가하였다. 이에 본 논문에서는 슬러리를 분리 정제하여, 수세뿐만 아니라 화학적 처리를 통하여 보다 고순도의 실리콘카바이드 분말을 얻어, 마이크로웨이브 건조방식으로 건조하였다. 건조한 슬러리 벌크를 분쇄하고 화학적 처리까지 수행하여 제작한 Powder를 각각 열분석, 입도분석, SEM 촬영, 성분분석, XRF, XRD을 통하여 분석하였다. 본 연구 결과 화학적 처리를 통하여 얻은 Powder의 회수율이 수세 처리를 통하여 얻은 Powder 보다 더 높아지는 것을 알 수 있었다. 태양광 소재 산업에서 발생하는 다량의 슬러리를 통합, 재활용함으로 점차 강화되고 있는 국내외 환경 규제에 적극 대응하고, 관련 소재 산업의 인프라 구축 효과를 기대할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.367-371
• /
• 2018

1,200 V class junction barrier schottky (JBS) diodes and schottky barrier diodes (SBD) were simultaneously fabricated on the same 4H-SiC wafer. The resulting diodes were characterized at temperatures from room temperature to 473 K and subsequently compared in terms of their respective I-V characteristics. The parameters deduced from the observed I-V measurements, including ideality factor and series resistance, indicate that, as the temperature increases, the threshold voltage decreases whereas the ideality factor and barrier height increase. As JBS diodes have both Schottky and PN junction structures, the proper depletion layer thickness, $R_{on}$, and electron mobility values must be determined in order to produce diodes with an effective barrier height. The comparison results showed that the JBS diodes exhibit a larger effective barrier height compared to the SBDs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.80-80
• /
• 2000

Surface acoustic wave (SAW) devices have become more important as mobile telecommunication systems need h호-frrequency, low-loss, and down-sized components. Higher-frequency SAW divices can be more sasily realized by developing new h호-SAW-velocity materials. The ZnO/diamond/Si multilasyer structure is one of the most promising material components for GHz-band SAW filters because of its SAW velocity above 10,000 m/sec. Silicon carbide is also a potential candidate material for high frequency, high power and radiation resistive electronic devices due to its superior mechanical, thermal and electronic properties. However, high price of commercialized 6- or 4H-SiC single crystalline wafer is an obstacle to apply SiC to high frequency SAW devices. In this study, single crystalline 3C-SiC thin films were grown on Si (100) by MOCVD using bis-trimethylsilymethane (BTMSM, C7H20Si7) organosilicon precursor. The 3C-SiC film properties were investigated using SEM, TEM, and high resolution XRD. The FWHM of 3C-SiC (200) peak was obtained 0.37 degree. To investigate the SAW propagation characteristics of the 3C-SiC films, SAW filters were fabricated using interdigital transducer electrodes on the top of ZnO/3C-SiC/Si(100), which were used to excite surface acoustic waves. SAW velocities were calculated from the frequency-response measurements of SAW filters. A generalized SAW mode. The hard 3C-SiC thin films stiffened Si substrate so that the velocities of fundamental and the 1st mode increased up to 5,100 m/s and 9,140 m/s, respectively.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.503-509
• /
• 2001

Thin films of hydrogenated amorphous silicon (a-Si : H) and hydrogenated amorphous silicon carbide (a-SiC:H) of different compositions were deposited on Si(100) wafer and glass by RF plasma-enhanced chemical vapor deposition (RF-PECVD). In the present work, we have investigated the effects of the RF power on the properties, such as optical band gap, transmittance and crystallinity. The Raman data show that the a-Si:H material consists of an amorphous and crystalline phase for the co-presence of two peaks centered at 480 and $520 cm^{-1}$ . The UV-VIS data suggested that the optical energy band gap ($E_{g}$ ) is not changed effectively with RF power and the obtained $E_{g}$(1.80eV) of the $\mu$c-Si:H thin film has almost the same value of a-Si:H thin film (1.75eV), indicating that the crystallity of hydrogenated amorphous silicon thin film can mainly not affected to their optical properties. However, the experimental results have shown that$ E_{g}$ of the a-SiC:H thin films changed little on the annealing temperature while $E_{g}$ increased with the RF power. The Raman spectrum of the a-SiC:H thin films annealed at high temperatures showed that graphitization of carbon clusters and microcrystalline silicon occurs.