• 한국연소학회지
• /
• 제17권3호
• /
• pp.30-45
• /
• 2012

An existing unit of power plant is considered to refurbish it for possible application of carbon capture and storage(CCS). Conceptual design of the plant includes basic considerations on the national and international situation of energy use, environmental concerns, required budget, and time schedule as well as the engineering concept of the plant. While major equipment of the recently upgraded power plant is going to be reused, a new boiler for air-oxy fired dual mode operation is to be designed. Cryogenic air separation unit is considered for optimized capacity, and combustion system accommodates flue gas recirculation with multiple cleaning and humidity removal units. The flue gas is purified for carbon dioxide separation and treatment. This paper presents the background of the project, participants, and industrial background. Proposed concept of the plant operation is discussed for the possible considerations on the engineering designs.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.85-89
• /
• 1997

We used a three-dimensional motion capture method to measure the grasping reach of Korean. This method was applied well to the grasping reach measurement with low measurement error and high efficiency. We measured the grasping reach of 29 males and 21 females at the different height from seat reference level; -10, 0, 30, 60, and 90cm. The grasping reach data were summarized at each 15 .deg. in polar corrdinates to compare with the former researches. If the number of subjects increases in the supplement research, the grasping reach data will be used in the ergonomic design of the driver's cabin or workstations in industry.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.79-82
• /
• 2001

Analytical solutions have been derived to delineate the capture zone created by pumping wells for the remediation design of contaminated groundwater. These previous analytical solutions are often restricted to pumping wells only, specific well locations, a limited number of wells, and an isotropic aquifer. Analytical solution was developed to deal with arbitrarily located multi injection-pumping wells in an anisotropic homogeneous aquifer. The solution presented in this study provides a simple, easy method for determining tile complex flow field caused by multi injection-pumping wells at different rates, and will consequently be useful in pump-and-treat design.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.168-178
• /
• 2009

To check feasibility of SEWGS(Sorption Enhanced Water Gas Shift) system, conceptual design and sensitivity analysis of operating variables have been investigated based on a design program of two-interconnected fluidized bed. Based on the conceptual design results, the optimum configuration for SEWGS was considered. Among three configurations, bubbling beds system was selected as the best configuration. Process design results indicate that the SEWGS system is compact and feasible. Based on the selected operating conditions, the effects of variables such as pressure, $CO_2$ capture capacity, solid inventory, CO conversion and $CO_2$ capture efficiency have been investigated as well.

• Asia pacific journal of information systems
• /
• 제6권1호
• /
• pp.5-20
• /
• 1996

Today's firms exist and run business in an uncertain and rapidly changing environment in terms of industry, market, technology, economic conditions, and culture. To be competitive, at least to survive, firms must cope with and manage uncertainty effectively. In other words, firms should be equipped with powerful weapons to capture competitive advantage over their competitors. There are several ways for a firm to capture competitive edge over its competitors such as cost leadership, quality of the products and services, manpower, higher productivity, and technology. Among these, technology, especially information technology, could be the most effective weapon for competitive advantages since it is possible to monitor competitors' movement as well as to provide appropriate information with both planning and control phases through an information system. In this paper, a competitive weapon in action, a Process Control System which is developed by and installed at a U.S petroleum company would the described.

• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 1999년도 제38차 춘계학술대회
• /
• pp.189-192
• /
• 1999

$^{188}Re$ (${\beta}^-=2.2$ MeV; ${\gamma}^-$=155 keV; $T_{1/2}$=16.9 hours) is an attractive therapeutic radioisotope which is produced from decay of reactor-produced tungsten-188 parent ($T_{1/2}$=69 days). $^{188}W$ has been produced from the double neutron capture reaction of $^{186}W.\;^{188}Re$ can be easily obtained by elution of saline on alumina based $^{188}W/^{188}Re$ generator, which is commercially available. Complexes labelled with $^{188}Re$ have been developed for the radiotherapy treatment of diseases because of the desirable nuclear properties of the radioisotope and it's chemical properties similar to those of technetium, a well established diagnostic agent.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.997-1000
• /
• 2007

Achieving white balance is one of the key issues for LCD image quality enhancement. A well-known color correction algorithm is Accurate Color Capture (ACC). Determination of ACC correction values has been time consuming as past methods have required trial-and-error analysis of differences between predicted and measured values. We propose a new ACC value determination method that uses spatially emulated patterns and measured values on patterns.

• Animal cells and systems
• /
• 제7권1호
• /
• pp.89-92
• /
• 2003

Immunoassays have become indispensable tools and achieved great importance in scientific and medical research. However, typical immunoassays are time-consuming and use complex, multi-step procedures. In this study, we introduce a new immunoassay system for the quantification of several analytes at a time without any washing steps. It is comprised of a detector solution with fluorescence-labeled antibodies and a test strip with immobilized capture antibodies. Using a micro-array scanner, the antigen-antibody complex was quantitatively determined by measuring the intensities of fluorescence on the capture lines or dots of nitrocellulose membrane. This method demonstrated its rapid quantitative determination of analytes without many processing steps as well as specific identification of multiple analytes in biological specimens.

• Molecules and Cells
• /
• 제46권2호
• /
• pp.120-129
• /
• 2023

Recent technical advances have enabled unbiased transcriptomic and epigenetic analysis of each cell, known as "single-cell analysis". Single-cell analysis has a variety of technical approaches to investigate the state of each cell, including mRNA levels (transcriptome), the immune repertoire (immune repertoire analysis), cell surface proteins (surface proteome analysis), chromatin accessibility (epigenome), and accordance with genome variants (eQTLs; expression quantitative trait loci). As an effective tool for investigating robust immune responses in coronavirus disease 2019 (COVID-19), many researchers performed single-cell analysis to capture the diverse, unbiased immune cell activation and differentiation. Despite challenges elucidating the complicated immune microenvironments of chronic inflammatory diseases using existing experimental methods, it is now possible to capture the simultaneous immune features of different cell types across inflamed tissues using various single-cell tools. In this review, we introduce patient-based and experimental mouse model research utilizing single-cell analyses in the field of chronic inflammatory diseases, as well as multi-organ atlas targeting immune cells.

• Mycobiology
• /
• 제28권4호
• /
• pp.197-201
• /
• 2000

The distribution and occurrence of aquatic zoosporic and terrestrial fungi were investigated in 21 well waters in Assiut governorate, Egypt. Using a zoospore capture technique, 923 colonies of aquatic freshwater fungi were recovered from well waters, out of which 811 colonies reached sexual maturity. These colonies were assigned to 23 species which belong to 11 genera. The most common genera were Achlya, Saprolegnia and Dictyuchus. Using two types of media, 35 species in addition to 2 varieties of terrestrial fungi which belong to 18 genera were also recovered. The most frequent glucophilic genera (recovered on glucose-Czapek's agar at $28^{\circ}C$) were Aspergillus, Penicillium and Fusarium. The results obtained on cellulose-Czapek's agar at $2^{\circ}C$ were basically similar to those on glucose agar and the most frequent genera were Aspergillus, Penicillium and Fusarium followed by Chaetomium and Cephalosporium.