Conceptual Design of 100 MWe Oxy-coal Power Plant-Youngdong Project

100 MWe 순산소 석탄연소 발전시스템의 개념설계-영동 프로젝트

  • Received : 2012.08.27
  • Accepted : 2012.09.19
  • Published : 2012.09.30

Abstract

An existing unit of power plant is considered to refurbish it for possible application of carbon capture and storage(CCS). Conceptual design of the plant includes basic considerations on the national and international situation of energy use, environmental concerns, required budget, and time schedule as well as the engineering concept of the plant. While major equipment of the recently upgraded power plant is going to be reused, a new boiler for air-oxy fired dual mode operation is to be designed. Cryogenic air separation unit is considered for optimized capacity, and combustion system accommodates flue gas recirculation with multiple cleaning and humidity removal units. The flue gas is purified for carbon dioxide separation and treatment. This paper presents the background of the project, participants, and industrial background. Proposed concept of the plant operation is discussed for the possible considerations on the engineering designs.

Keywords

References

  1. Winkler H., Brouns B., and Kartha S., "Future mitigation commitments: differentiating among non-Annex I countries", Climate Policy, Vol. 5, 2006, pp. 469-489. https://doi.org/10.1080/14693062.2006.9685572
  2. Pennell, N., Fowler, R., Fayad, W., and Sayed, T. E., "Climate change after the Kyoto protocol, A new architecture for global policy", Booz and Company Inc., 2009.
  3. Gwak, D., "Green growth: a Korean version of sustainable development", KIET Industrial Economic Review, Vol. 14, No. 2, 2009.
  4. Cory, K., Couture, T., and Kreycik, C., "Feed-in tariff policy: Design, implementation, and RPS policy interactions", National Renewable Energy Laboratory, Technical report, NREL/TP-6A-45549, 2009.
  5. Revelle, E., "Cap-and-trade versus carbon tax; Two approaches to curbing greenhouse gas emissions", League of women voters of the United States: Climate change task force, 2009.
  6. Spero, C., "Callide oxyfuel Project-Status and development", Proceedings of the 1st oxyfuel combustion conference, 2009, Cottbus, Germany.
  7. Stromberg, L., Lindgren, G., Jacoby, J., Giering, R., Anheden, M., Burchhardt, U., Altmann, H., Kluger, F., and Stamatelopoulos, G., "First test results from Vattenfall's 30 MWth oxyfuel pilot plant in Schwartz Pumpe", Proceedings of the 34th Int. technical conference on clean coal and fuel systems, 2009, Clearwater, FL, USA.
  8. Irons, R., Sekkapan, G., Panesar, R., Gibbins, J., and Lucquiaud, M., "$CO_2$ capture ready plants", Technical report of IEA Greenhouse gas R&D programme, Report number: 2007/4, 2007.
  9. Oskarsson, K., Berglund, A., Deling, R., Stenack, O., and Fritz, J., "A planner's guide for selecting clean-coal technologies for power plants", The world bank, Washington D. C., 1997, Chapter 3, pp. 17-40.
  10. Lee, K., Kim, S., Choi, S., and Kim, T., "Performance evaluation of an oxy-coal-fired power plant", Journal of Thermal Science and Technology, Vol. 4, No. 3, 2009, pp. 400-407. https://doi.org/10.1299/jtst.4.400
  11. Arias, B., Pevida, C., Rubiera, F., and Pis, J., "Effect of biomass blending on coal ignition and burnout during oxy-fuel combustion", Fuel, Vol. 87, No. 12, 2008, pp. 2753-2759. https://doi.org/10.1016/j.fuel.2008.01.020
  12. Bejarano, P. and Levendis, Y., "Combustion of coal chars in oxygen-enriched atmospheres", Combustion Science and Technology, Vol. 179, No. 8, 2007, pp. 1569-1587. https://doi.org/10.1080/00102200701239272
  13. Naredi, P. and Pisupati, S., "Comparison of char structural and reactivity parameters for air-coal and $O_2/CO_2$ coal combustion", Proceedings of the Int. conference on coal science and technology, 2007, Nottingham, UK.
  14. Scheffknecht, G. and Maier, J., "Firing issues related to the oxyfuel process", VGB PowerTech, Vol. 88, No. 11, 2008, pp. 91-97.
  15. Rathnam, R., Elliott, L., Wall, T., Liu, Y., and Moghtaderi, B., "Difference in reactivity of pulverized coal in air($O_2/N_2$) and oxy-fuel($O_2/CO_2$) conditions", Fuel Processing Technology, Vol. 90, No. 6, 2009, pp. 797-802. https://doi.org/10.1016/j.fuproc.2009.02.009
  16. Khare, S., Wall, T., Gupta, R., Elliott, L., and Buhre, B., "Retrofitting of air-fired PF plant to oxyfuel: heat transfer impacts for the furnace and convective pass, and associated oxygen production requirements", Proceedings of the 5th Asia-Pacific conference on combustion, 2005, Adelaide, Australia.
  17. Uchida, T., Yamada, T., Hashimoto, K., and Watanabe, S., "Recent test results on oxy-fuel combustion using the pilot scale test facilities", 3rd meeting of the oxy-combustion network, 2008, Yokohama, Japan.
  18. Buhre, B., Elliott, L., Sheng, C., Gupta, R., and Wall, T., "Oxy-fuel combustion technology for coal-fired power generation", Progress in Energy and Combustion Science, Vol. 31, 2005, pp. 283-307. https://doi.org/10.1016/j.pecs.2005.07.001
  19. Andersson, K. and Johnsson, F., "Flame and radiation characteristics of gas-fired $O_2/CO_2$ combustion", Fuel, Vol. 86, 2007, pp. 656-668. https://doi.org/10.1016/j.fuel.2006.08.013
  20. Hjartstam, S., Andersson, K., Johnsson, F., and Leckner, B., "Combustion characteristics of lignitefired oxy-fuel flames", Fuel, Vol. 88, 2009, pp. 2216-2224. https://doi.org/10.1016/j.fuel.2009.05.011
  21. Choi, C., Chae, T., and Yang, W., "Considerations on design with combustion system of oxy-pulverized coal power plants", Proceedings of the 40th Korean society of combustion symposium, 2010, Mokpo, Korea.
  22. Basu, P., Kefa, C., and Jestin, L., "Boilers and burners: design and theory", Springer, New York, 2000.
  23. Levasseur, A., Chapman, P., Nsakala, N., and Kluger, F., "Alstom's oxy-firing technology development and demonstration-Near term $CO_2$ solutions", Proceedings of the 34th Int. technical conference on clean coal and fuel systems, 2009, Clearwater, FL, USA.
  24. Kakaras, E., Koumanakos, A., Doukelis, A., Giannakopoulos, D., and Vorrias, I., "Oxyfuel boiler design in a lignite-fired power plant", Fuel, Vol. 86, No. 14, 2007, pp. 2144-2150. https://doi.org/10.1016/j.fuel.2007.03.037
  25. Seltzer, A. and Fan, Z., "Design of a Flexi-Burn-TM pulverized coal power plant for carbon dioxide and sequestration", Proceedings of the 34th Int. technical conference on clean coal and fuel systems, 2009, Clearwater, FL, USA.
  26. Chae, T., Yu, T., Bang, B., Kim, S., and Yang, W., "A numerical study on characteristics of oxy-pulverized coal combustion in a corner-firing boiler of 125 MWth scale", Proceedings of the 34th Int. technical conference on clean coal and fuel systems, 2009, Clearwater, FL, USA.
  27. Bordenet, B., "Influence of novel cycle concepts on the high temperature corrosion of power plants", Materials and Corrosion, Vol. 59, No. 5, 2008, pp. 361-366. https://doi.org/10.1002/maco.200804116
  28. Liu, H. and Okazaki, K., "Simultaneous easy $CO_2$ recovery and drastic reduction of SOx and NOx in $O_2/CO_2$ coal combustion with heat recirculation", Fuel, Vol. 82, 2003, pp. 1427-1436. https://doi.org/10.1016/S0016-2361(03)00067-X
  29. Liu, H., Zailani, R., and Gibbs, B., "Pulverized coal combustion in air and in $O_2/CO_2$ mixtures with NOx recycle", Fuel, Vol. 84, 2005, pp. 2109-2115. https://doi.org/10.1016/j.fuel.2005.04.028
  30. Kim, S., Ahn, H., Choi, S., Kim, Y., Kim, T., and Seo, S., "Flue gas system for an air-oxy dual firing power plant", Proceedings of the 40th Korean society of combustion symposium, 2010, Mokpo, Korea.
  31. Ahari, J., Pakseresht, S., Mahdyarfar, M., Shokri, S., Zamani, Y., Nakhaei, A., and Naderi, F., "Predictive dynamic model of air separation by pressure swing adsorption", Chemical Engineering and Technology, Vol. 29, 2006, pp. 50-58. https://doi.org/10.1002/ceat.200500226
  32. Mun, H., Park, D., and Son, M., "Air separation technology and future", Chemical Industry and Technology, Vol. 15, 1997, pp. 211-217.
  33. Smith, A. and Klosek, J., "A review of air separation technologies and their integration with energy conversion processes", Fuel Processing Technology, Vol. 70, 2001, pp. 115-134. https://doi.org/10.1016/S0378-3820(01)00131-X
  34. Yong, P., Mun, H., and Yi, S., "Exergy analysis of cryogenic air separation process for generating nitrogen", Journal of Industrial and Engineering Chemistry, Vol. 8, 2002, pp. 499-505.
  35. Lee, H., Choi, S., Mun, H., Choi, H., Park, W., and Seo, S., "Design considerations for ASU and CPU in 100 MWe oxy-coal power generation", Proceedings of the 8th Asia-Pacific conference on combustion, 2010, Hyderabad, India.
  36. Bouillon, P., Hennes, S., and Mahieux, C., "Postcombustion or oxyfuel-A comparison between coal power plants with integrated $CO_2$ capture", Energy Procedia, Vol. 1, 2009, pp. 4015-4022. https://doi.org/10.1016/j.egypro.2009.02.207
  37. Zanganeh, K., Shafeen, A., and Salvador, C., "On the performance of an advanced pilot-scale $CO_2$ capture and compression unit($CO_2CCU$)", Proceedings of the 1st oxyfuel combustion conference, 2009, Cottbus, Germany.
  38. Wall, T. and Yu, J., "Coal-fired oxyfuel technology status and progress to deployment", Proceedings of the 34th Int. technical conference on clean coal and fuel systems, 2009, Clearwater, FL, USA.
  39. Yamada, T., Tamura, M., Fujimori, T., and Misawa, N., "Test results of oxy-fuel combustion and oultline of demonstration project in Australia", Proceedings of the Int. conference on power engineering, 2007, Hangzhou, China.
  40. Davidson, R. and Santos, S., "Oxyfuel combustion of pulverised coal", IEA clean coal centre, 2010.