• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.22-35
• /
• 1995

Pepper is the most important horticultural plant in Korean farm. Pepper harvesting has been known to be the most difficult process in pepper cultivation so that demand for mechanization is strong. In a research to develop a pepper harvesting machine performance and capacity of the harvester should be determined based on both economical feasibility and machine design concept. In order to accomplish an economical analysis of the pepper harvester, a mathematical model for comparing manual harvesting cost to machine harvest cost was developed. Validity of the model depends on the data used in the model. Economical information for the model variables was acquired from the result of farm survey on pepper cultivation technique and economics of pepper farmer. Technical information on pepper harvester were also collected through literature review and analyzed. Based on the economical analysis and synthesis of the technical information on pepper harvesters, its performance and capacity were determined. The operating performances of the harvester such as cutting, conveying, flipping, pepper removing and post-processing (sorting) were determined. Daisy capacity of the machine was determined to be 0.41 ha. A pepper harvester with the suggested capacity was economically feasible if the price of pepper harvester, pepper recovery ratio and service life of harvester were about 6 million won, 80%, and 4 years, respectively.

• PNF and Movement
• /
• v.17 no.2
• /
• pp.303-310
• /
• 2019

Purpose: This study aimed to investigate the correlation between abdominal muscle strength and measures of respiratory function in stroke patients. Methods: The study participants comprised 17 (male: 12, female: 5) stroke patients hospitalized at W rehabilitation hospital in Busan, South Korea. Abdominal muscle strength was assessed using a digital manual dynamometer for 5 seconds contacting the sternal notch of the participants to bend the trunk. Respiratory function (forced vital capacity, forced expiratory volume in one second, forced expiratory volume in one second/forced vital capacity, and peak expiratory flow) was assessed using a spirometer. The collected data were analyzed using Pearson's correlation analysis, and the significance level was set 0.05. Results: A statistically significant correlation was found between abdominal muscle strength and forced vital capacity, forced expiratory volume in one second, and peak expiratory flow. However, abdominal muscle strength and forced expiratory volume in one second/forced vital capacity were not significantly correlated. Conclusion: This study demonstrated that there is a relationship between abdominal muscle strength and respiratory function. Exercise programs to strengthen the abdominal muscles are therefore necessary to improve respiratory function in stroke patients.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.87-96
• /
• 1999

It is very important to analyze the capacity of basic freeway section in terms of planning, design, and operation of roads. Capacity, in Korean Highway Capacity Manual was Published in 1992, had been determined by data collected in only 4-lane freeway. But, Korea is continuously planning and constructing multi-lane roads for increasing traffic demand. For this reason, it is necessary to determine the capacity for multi-lane freeways. This study goals are two-fold the determination of lane capacity for 8-lane freeway; and the development of methodology determining total capacity using lane friction factor This study utilized the data collected by loop detectors at a station of FTMS in Kyungbu expressway. For determining capacities, this study analyzed maximum flow rate in various aspects such as collecting period, each lane, and total lane in one-way. In addition, this study evaluated the breakdown in traffic flow relations in order to find out interrelation of breakdown among lanes. Through this analysis, this study determined lane friction factors, critical speed, and critical density. Finally, this study expressed a new methodology of capacity analysis for multi-lane freeways using some findings from this analysis.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.137-147
• /
• 2005

This study is to define new road capacity concept, and to develop and propose an estimation method, through the analysis of individual vehicular behaviors in continuum flow. Developments in detection technology enable various and precise traffic data collection. The U.S. HCM (Highway Capacity Manual) method does not require such various and precise traffic data, and outputs only limited results. Alternative capacity concepts, which can be classified into a stochastic model and behavioral or deterministic model, are attempts for modeling some prominent traffic flow features, namely so-called a capacity drop and a traffic hysteresis, using such various and precise traffic data. Yet, no capacity concept up-to-date can describe both features. The analysis of individual vehicular behaviors, including speed-density plot per time lap, traffic flow-speed-density diagram per each sampling interval, time headway distribution, and free flow speed distribution, is performed for overcoming the limits of the previous capacity concepts. A stochastic methods are applied to determine time headway for estimating freeway capacity for traffic control.

• Journal of Korean Society of Transportation
• /
• v.11 no.1
• /
• pp.23-36
• /
• 1993

The two-lane, two-way highway simulation program(TWOPAS) is evaluated for Korean Highway Capacity Manual Study. TWOPAS program input variables, especially related vehicle performance, traffic flow relationship, car-following model and passing logic are examined and modified through the analysis results of our two-lane, two-way highway traffic characteristics. Simulation outputs with and without modification are compared with the field data. The results show that improved TWOPAS program(TWOPAS KI) is well suitable for simulating our two-lane, two-way highway condition.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.37-54
• /
• 2008

The standard construction manual of the SDA (Separated Doughnut Auger) piling method was proposed so that the resisting capacity of the augered piles could work effectively. 438 dynamic pile load tests were performed on 379 test piles, which were installed at 36 sites in Korea by the SDA piling method with application of various water-cement ratio of cement milks. The dynamic pile load test results showed that the bearing capacity of the SDA augered piles depended on the water-cement ratio of cement milks. And couple of the formulas were presented according to water-cement ratio and various grounds to estimate quantitatively both the unit end bearing and the unit frictional capacity of the SDA augered piles. It was also considered that the water-cement ratio of cement milks exerts an influence on the bearing capacity of the SDA augered piles. The presented formulas were compared with the existing formulas, which were presented by several standard design codes to design the augered piles.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.117-132
• /
• 1994

Drivers select approach lane according to various traffic situations as well as their destination. This behavior affects the utilization of lanes and capacity analysis at urban signalized intersections. This paper presents the concept, behavior of lane utilization, and the lane utilization factors which included in the study. Preparation of Korean Highway Capacity Manual (1992). Lane utilization is affected by various traffic and geometric factors which are roadway side friction, median friction, and number of lanes, etc. and it converges to an equal utilization as the degree of saturation (V/C ratio) increase. Lane utilization factor is suggested by the degree of saturation and the number of lanes, and it is presented in this paper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.2
• /
• pp.44-50
• /
• 2006

A driver's feelings of transmission serve as a basis to judge not only the transmission but also the entire automobile that he or she drives. The importance of transmission feelings is increasing daily because of driver's desire for increased torque and other improved functions. In order to accommodate such desire of drivers, new friction materials have been developed. The study in this report compared the affects of such materials and the force for transmission theoretically and empirically. By doing so, the study attempted to establish basic references for computation of capacity and other factors to be determined at the time of design of synchronizer system.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.395-398
• /
• 2008

There was heavy rains that happened for 23 days consecutively in 2006. Many regions have suffered because of rains and among them In-Je and Pyung-Chang area are the most suffered areas at that time. I conducted field survey at those two regions. The case of other damaged regions also reviewed in this paper and volunteer activity of volunteer groups is reviewed. I intended to make clear the volunteer activity system through analysing need capacity of volunteers. Main suggestions are as below. In management system, the nexts are discussed. Improving the ability of village headmen and volunteer groups that manage relief stuffs at the first level and cooperating method with companies are discussed. Supporting system for isolated regions and necessity about developing operating manual are suggested. In education system, specialized education for different disaster areas, field orientation education, and training managerial positions are suggested. In supporting system, improving NDMS(National Disaster Management System), computerized program for volunteer management, insurance for volunteers, issuing a confirmation of volunteering activity, securement of emergency communication system, budget for prevention and donation are also suggested.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.125-152
• /
• 1995

The purposes of this study are twofold ; (1) to investigate the accuracy of estimation power of the individual models. such as those of Highway Capacity Nanual (HCM), Korea Highway Capacity Manual (KHCM), and NationalCooperative Highway Research Program(NCHRP) Report339 ; and (2) to develop an adjusted delay model which can be applied to the signal control system in urban areas. The study is mainly focused on four subjects related to the research purposes, which are as follows ; (1) characteristecs of exsisting delay models ; (2) inherent problems in exsisting delay models : (3) validation of the proposed model by the comparison of observed delay with estimated delay :and (4) a method which can be applied to develop an appropriate delay model for actrual signal control systems by the adjusted fact of the proposed model.