• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2174-2181
• /
• 1996

Equations of chordwise and flapwise bending motions of pretwisted rotatin cantilever beams are derived. The two motions are coupled to each other due to the pretwist angle of the beam cross section. As the angular speed, hub radius ratio, and pretwist angle vary, the vibration characteristics of the beam change. It is found that engenvalue loci veering phenomena and associated mode shape variations occur between two vibration modes due to the pretwist angle. The effect of the pretwist angle on the critical angular speed is also investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.59.6-59
• /
• 2002

$\textbullet$ An experiment for the active vibration control of a cantilever beam is performed. $\textbullet$ An active damping system consisting of a laser sensor and an electromagnetic actuator. $\textbullet$ The design procedure and the performance analysis of an H2 controller for non-collocated systems. $\textbullet$ Simulations and experiments are performed to verify the performances of the controller. $\textbullet$ The optimal H2 controller is designed based on a reduced order model. $\textbullet$The Sensitivity function is introduced to analyze the Spillover phenomenon. $\textbullet$ Active vibration control, Cantilever beam, H2 controller, spillover, Non-collocated system.

• Composites Research
• /
• 제14권3호
• /
• pp.69-76
• /
• 2001

본 연구에서는 고무의 동탄성계수와 손실계수에 대한 주파수 의존성을 평가하기 위한 새로운 양팔 샌드위치보 시험법을 제안하였다. 고무층이 삽입되어 접착된 양팔샌드위치보 시험편의 횡진동 거동에 대해 유한요소 모달변형률 에너지법을 조합한 사인스위프 시험을 이용하여 분석하고 동적 점 탄성해석시험 및 단순공진시험 결과와 비교 검토하였다. 양팔 샌드위치보의 횡진동 모드에 따라 고무층의 주파수별 동탄성계수와 재료감쇠계수를 측정하고, 이들을 최소자승오차법에 의거하여 주파수의 이차함수로 회귀시켜 평가할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제19권2호
• /
• pp.567-577
• /
• 2005

Several methods for improving the interlaminar strength and fracture toughness of composite materials are developed. Through-the-thickness stitching is considered one of the most common ways to prevent delamination. Stitching significantly increases the Mode I fracture toughness and moderately improves the Mode II fracture toughness. An analytical model has been developed for simulating the behavior of stitched double cantilever beam specimen under various loading conditions. For z-directional load and moment about the y-axis the numerical solutions are compared with the exact solutions. The derived formulation shows good accuracy when the relative error of displacement and rotation between numerical and exact solution were calculated. Thus we can use the present model with confidence in analyzing other problems involving stitched beams.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.335-340
• /
• 2001

Dynamic stability of a rotary oscillating cantilever beam is presented in this study. Using the stretch deformation instead of the conventional axial deformation, three linear partial differential equations are derived from Hamilton's principle and transformed into dimensionless forms. Stability diagrams of the first order approximate solutions are obtained by using the multiple scale perturbation method. The stability diagrams show that relatively large unstable regions exist near the combination of the first chordwise bending natural frequency and the first stretch natural frequency. This result is verified by using the generalized-${\alpha}$ method.

• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.421-426
• /
• 2007

본 연구는 이종재료의 이중외팔보 시험편들을 충격하중으로 실험한 결과들에 대하여 유한요소법으로 동적해석을 하였다. 충격 속도로서는 6.4 및 18.47 m/s를 적용하였고 그 실험 결과와 시뮬레이션 데이터로 상호 비교하였다. 크랙 에너지 해방율과 블록의 힘 및 변형을 컴퓨터로 수치 해석할 수 있었다. 본 논문에서 해석된 시험편의 수치해석 데이터로 실험 데이터에 근접시키게 되는 검증을 함으로서 충격 실험에 대한 수치적 시뮬레이션을 하기에 타당함을 알 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.593-598
• /
• 2009

This paper presents a preliminary study to monitor the lateral behavior of pile foundation using multiplexed fiber Bragg grating (FBG) sensors. In the preliminary study, an 1.7 meter long cantilever beam with the shape of square hollow box was fabricated and tested under the static loading. Four FBG sensors were multiplexed in a single optical fiber and installed into the top and bottom of the cantilever beam. The strains are directly measured from FBG sensors followed by curvature calculations based on the plane section assumption. Vertical deflections are then estimated using the regression analyses based on the geometric relationships. It has been found that excellent correlation with conventional sensing system was observed. The success of the test encourages the use of the FBG sensing system as a monitoring system for pile foundations. However, further consideration should be given in the case of the sensor malfunction for the practical purpose.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.183-187
• /
• 1986

본 연구에서 종동력을 받는 첨단질량을 갖는 외팔보의 동적 안정성을 연구 하기 위해 접선 종동력을 전자석의 자기력에 의해 만들었으며, 이 비보존 종동력하에 서 보의 고유진동수의 변화와 임계하중에 대해 이론과 실험을 비교하였다.

• 센서학회지
• /
• 제19권4호
• /
• pp.313-319
• /
• 2010

Vibration energy harvesting is an attractive technique for potential powering of low power devices such as wireless sensors and portable electronic applications. Most energy generator developed to date are single vibration frequency based, and while some efforts have been made to broaden the frequency range of energy harvester. In this work, The effect of energy harvesting were investigated at various vibration frequencies, vibration beams, vibration point and test masses. The maximum output voltage of the bimorph piezoelectric cantilever was shifted according to vibration point. Vibration frequency with maximum output voltage decreased with the increasing length of vibration beam and increasing test mass. The sample with vibration beam length 0.5 L generated a peak output voltage of 32 $V_{rms}$ and shows a 45 % increase in voltage output in comparison to the corresponding original bimorph. It was found that a piezoelectric bimorph has a possibility to be as the energy harvesting cantilever, which is successfully tuned over a vibration frequency range to enable a maximum harvesting energy.

• Structural Engineering and Mechanics
• /
• 제87권6호
• /
• pp.541-554
• /
• 2023

An unbraced cantilever beam subjected to loads which cause bending about the major axis may buckle in a flexuraltorsional mode by deflecting laterally and twisting. For the efficient design of these structures, design engineers require a simple accurate equation for the elastic flexural-torsional buckling load. Existing solutions for the flexural-torsional buckling of cantilever beams have mainly been derived by numerical methods which are tedious to implement. In this research, an attempt is made to derive a theoretical equation by the energy method using different buckled shapes. However, the results of a finite element flexural-torsional buckling analysis reveal that the buckled shapes for the lateral deflection and twist rotation are different for cantilever beams. In particular, the buckled shape for the twist rotation also varies with the section size. In light of these findings, the finite element flexural-torsional buckling analysis was then used to derive simple accurate equations for the elastic buckling load and moment for cantilever beams subjected to end point load, uniformly distributed load and end moment. The results are compared with previous research and it was found that the equations derived in this study are accurate and simple to use.