• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1977.06a
• /
• pp.4.4-5
• /
• 1977

The vibratory energy introduced into the external ear canal is changed by the mechanical factors of eardrum itself, the motility of ossicles, and the air cushion of tympanic cavity and the like. This study was designed to investigate the volume of middle ear cavity and mastoid air cell system as a factor of determining the accoustic impedance of middle ear system. The author studied how the increase in air volume of middle ear cavity effects on the acoustic impedance of middle ear system with dogs' ears and researched the correlation between the degree of pneumatization of temporal bones and the acoustic impedance of middle ear system by comparing the radiological findings of pneumatization (Law's and Towne's projection) with the acoustic impedance measurements with Madsen ZO 70. The result is as follows: 1 The tympanometric findings in control state revealed the curves of type A, and did not change in its configuration by the increase in the air volume of dogs middle ear system. 2. The static compliance of middle ear revealed a distinct and linear increase in proportion to the increase in air volume of middle ear system; the rate of increase was $0.05{\pm}0.02$ cc of static compliance per cc of air volume. 3. Authenticated in the above result and the tendency to increase in static compliance in proportion to the increase in the degree of pneumatization of temporal bones, there was significant regression equation between the degree of pneumatization of temporal bones (x variable) and the static compliance of middle ear system; $y=0.19x{\pm}0.16{\pm}0.05$ It is suggested that the difference in volume of middle ear system plays an important role in the change of the static compliance of middle ear, and the author concludes that the measurement of static compliance of middle ear has clinical value as diagnostic means of evaluating the degree of pneumatization of temporal bones along with some radiological examination.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.111-126
• /
• 1998

In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5％ of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.14-30
• /
• 2020

This study focuses on the fact that pictorial maps in the late Joseon Dynasty were conceptual diagrams with the place names perceived by the people at the time of their production. In this regard, targeting on five pictorial maps, the humanistic landscape characteristics of Pyongyang, which had cultural identities such as a historically old, commercial, and Pungnyu(appreciation for the arts) city, were derived as follows. First, the historic legitimacy of Pyongyang Castle was represented by ritual and religious facilities. They include 'Dangunjeon' and 'Gijagung' related to the nation founder, 'Munmujeong': the remains of Goguryeo, 'Sajikdan' & 'Pyongyanggangdan': the place of the national rites, Hyanggyo and Seowon: education & rite functions, Buddhism and Taoist facilities, 'Yongsindang', 'Sanshindang', and 'Jesindan': folk religion facilities. Gija-related facilities, which became symbols of Pyongyang due to the importance of Small-Sinocentrism and Gija dignity tendency, were distributed throughout Pyongyang Castle though, the facilities related to King Dongmyeong of Goguryeo and the spaces of religion praying for blessings are spread in Bukseong and on the riverside of Daedonggang each. Second, as a Pyongando Province's economic center, Pyongyang's commercial landscape was represented by logistics and transportation facilities. The Daedonggang River, which was in charge of transportation functions, had many decks such as 'Yangmyeongpo', 'Cheongryongpo' and 'Waeseongjin' and bridges, such as 'Yeongjegyo' and 'Gangdonggyo', which connected major transportation routes. The road network was created in Oeseong area to facilitate logistics transportation and management, and many warehouses named after the jurisdiction of Pyongyangbu were distributed near the roads and Provincial Offices of the main gates. In addition, it was characterized by the urban area systematically divided with hierarchical roads, 'Bukjangnim' of willow trees planted on the main entrance roads of Pyongyang Castle, a linear landscape created by 'Simnijangnim' consisting of mixed forests with elm trees. Third, Pungnyu City is realized by the distribution of amusement facilities. The riverside of Daedonggang adjacent to Naeseong exhibits characteristics of artificial landscape such as a canal leading to the inside of the castle, a docking facility with embankments, and a port with cargo ships anchored. However, Bukseong of the natural surroundings had numerous pavilions and platforms such as 'Bubyeongnu', 'Eulmildae', 'Choeseungdae', 'Jebyeokjeong' and engraved letters such as 'Cheongnyubyeok', 'Jangbangho'. 'Osunjeong', 'Byeogwolji', 'Banwolji' near 'Sachang', and 'Aeryeondang', built on the island of a square pond, created waterscape in Naeseong invisible from the Daedonggang, and for practical purposes, ponds and repeated willow vegetation landscape related to Gija were placed in the western rampart of Jungseong. In addition, 'Seonyeondong', a cemetery of Gisaeng, located near by Chilseongmun, was used as poem titles and themes by literary people, contributing to the creation of the Pungnyu image of Pyongyang.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.383-390
• /
• 2004

This paper propose a method that controls facial expression of 3D avatar by having the user select a sequence of facial expressions in the space of facial expressions. And we setup its system. The space of expression is created from about 2400 frames consist of motion captured data of facial expressions. To represent the state of each expression, we use the distance matrix that represents the distances between pairs of feature points on the face. The set of distance matrices is used as the space of expressions. But this space is not such a space where one state can go to another state via the straight trajectory between them. We derive trajectories between two states from the captured set of expressions in an approximate manner. First, two states are regarded adjacent if the distance between their distance matrices is below a given threshold. Any two states are considered to have a trajectory between them If there is a sequence of adjacent states between them. It is assumed . that one states goes to another state via the shortest trajectory between them. The shortest trajectories are found by dynamic programming. The space of facial expressions, as the set of distance matrices, is multidimensional. Facial expression of 3D avatar Is controled in real time as the user navigates the space. To help this process, we visualized the space of expressions in 2D space by using the multidimensional scaling(MDS). To see how effective this system is, we had users control facial expressions of 3D avatar by using the system. As a result of that, users estimate that system is very useful to control facial expression of 3D avatar in real-time.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.54-67
• /
• 1998

The purposes of this study were to evaluate the efficiency of dentin cutting and root-end cavity preparation, and to determine the incidence of tooth crack when root-end retrograde cavity preparation was done with. ultrasonic diamond instruments. To evaluate the efficiency of dentin cutting, ultrasonic diamond and stainless steel instruments were applied to 20 exposed bovine dentin surfaces perpendicularly or parallely at the low, and medium power settings for 1 minute ($Miniendo^{TM}$, EIE, CA, U.S.A.). The resultant cavity depth was measured. To evaluate the efficiency of cavity preparation and to investigate the incidence of tooth crack, 165 mesiobuccal, distobuccal and palatal root-ends of extracted human maxillary first molars were resected by 3 mm perpendicularly to the long axis of tooth using a slow speed diamond saw after root canal preparation and filling. Retrocavities were prepared using a ultrasonic diamond instrument or a stainless steel one of the low- or medium power settings of 2 or 6. Time consumed and the number of strokes used for the cavity preparation were measured and the incidence of tooth cracks was evaluated under a stereomicroscope. The results were as follows: Both at the low and medium power settings, and both with perpendicularly- and parallely applied tips to dentin, diamond instruments showed higher dentin cutting efficiency than stainless steel ones did (p<0.01). When tips were applied to dentin perpendicularly, both diamond instrument and stainless steel one showed higher cutting efficiency with medium power setting than with low power one (p<0.01). Both at the low- and medium power settings, both diamond instrument and stainless steel one showed higher cutting efficiency when tips were applied perpendicularly to dentin surface than applied parallely (p<0.01). At the medium power setting, the number of stroke and time consumed were less with diamond instrument than with stainless steel one (p<0.05) for the retrograde cavity preparation. At the low power setting, diamond instrument induced less tooth cracks than stainless steel one did (p<0.01).

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.175-194
• /
• 2014

Because the thawing of the Arctic ocean is slowly accelerating due to global warming, recently exploring resources in Arctic ocean and transporting resources by using the North Pole route have been getting spotlight. Since the original route transported by the Suez Canal from Korea to Europe could be shorten about 8,000km in distance(decreased about 38% compared to the original route), which means shortening about 10 voyage dates, it is expected to bring huge logistics cost reduction. Once the North Pole route is commercialized successfully, it would be one of the most important variables that affects future of Busan port and guides for economic development of Busan. Therefore, the purpose of this study is to analyze Busan port and the economic growth of Busan area by researching promising industry, based on the effect of freight transporting by the Northern sea route on the economy of Busan. For this study, questionnaire surveys and interviews were conducted for 64 people of experts in the shipping and port industry, relevant government, and academics. The survey finding shows that port logistics industry is a promising business in Busan in terms of its growth and competitiveness. It is necessary to develop feeder network facilities that prepare for commercialization of the Northern sea route as a short and medium term plan and provide professional manpower training in polar regions. Ship supply business would also play an important role. It is identified that revitalization of shipbuilding and ocean plant industry should be done in terms of Arctic business. With regard to the fishery industry it is found that modernization of fishery ship and development of fishery equipment used in polar areas should be carried out.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.114-159
• /
• 2012

The Northern Song Dynasty Period (北宋時代) was a drastic transitional era in all aspect of Chinese society including the politico-economic system, ideology and cultural trait. These changes that began in the late Tang (唐) Dynasty Period accomplished in the Northern Song Dynasty. In this phase, the fundamental change influenced in all institutional area; and among them, the capital city planning and its associating building technology to pile stone walls shows one of the significant change of those time. Based on the geographical factor, confluences of many rivers, the Kaifeing (開封) area where the BianLieng palace had developed as a political and economical centre since the Tang Dynasty when the Grand Canal was constructed. According to archaeological researches, the central city structure of Dongjing Walled Town was begun to plan in the late Tang Dynasty and formed in Five Dynasties. The fundamental functional change of city completed in the Midnorthern Song Dynasty. In spite of the relatively late beginning of archaeological investigations to Kaifeng Walled Town and Dongjing Walled Town due to unfavourable natural environment, excavations inaugurated since 1981 have achieved the significant investigations including the actual measurement and excavation to the outer wall, the preliminary excavation to the inner city area, the investigation and excavation to the royal palace of Song and the survey to the royal palace of King Zho in the Ming (明) Dynasty. These surveys have provide important data to reconstruct the 변량 palace, and elucidate the characteristics of city plan in the Dongjing Walled Town and the institutional change of capital city plan of the Northern Song Dynasty. The basic layout of Dongjing Walled Town reflect the realisation of ideality of the late Chinese medieval capital city structure that establish the commercial and economic centre based on the intensification of emperor's power by means of the organisation of ethical institution and the development of commercial economy. Firstly, the central place of the Kaifeng area is encircled with triple walls. This emphasise the authority of emperor located on the summit in the hierarchical ethic system succeeding to the main capital city plan of the late phase of ancient China. Secondly, the location of Dongjing Walled Town was decided by the transport network and the commercial function and defence function. Thirdly, this site shows the change of city structure and landscape of the Northern Song Dynasty. The closed Fengri (坊里: block) system transferred the open Jiexiang (街巷: road) system. Fourthly, the capital city was characterised by the free market trade and the diversification of market place. Fifthly, a convenient transport network in the Bian River, a centre of the Grand Canals, enabled to construct the Kaifeng Walled Town. Therefore, the Northern Song Dynasty continuously accomplished the developed water system as concerning about the utilisation of waterways after the construction of city.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.20-26
• /
• 2019

Purpose: Recently TF-adaptive movement is developed in order to increase the durability of TF files. The purpose of this study was to assess the effects of adaptive movement on durability and performance of twisted files. Materials and Methods: Resin blocks simulating artificial J-shape canals were used for this study. In TFC group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under continuous rotation 500 rpm/4.0 Ncm. In TFA group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under adaptive movement. After preparing each artificial canal, TF files were observed under dental microscope for assessing existence of unwinding, distortion, and fracture. If unwinding of flute was observed, the number of artificial canals until unwinding of flute occurs was recorded. Required time until instruments reach working length and distance of unwinded portion of files from D0 were measured. All test results were conducted by Mann-Whitney U test at a 0.05 level of significance. Results: No Ni-Ti instrument's separation was observed. Number of resin blocks until file unwinding happens and working time was significantly high in TFA group compared to TF group. Distance of distortion from D0 didn't show significant difference between TFA, TF groups. Conclusion: The number of resin blocks prepared until unwinding happens and working time were significantly high in TFA group. The location of unwinding showed no significant difference between 2 groups. Adaptive movement increased the number of canals prepared until unwinding occurs and working time of twisted files.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.399-415
• /
• 2021

This study was conducted to suggest the optimal periods for planting and felling Larix kaempferi tree by monitoring its cambial activity period. In addition, the heat summation to induce the cambial activity of Larix kaempferi was investigated. The study sites were at Mt. Worak and Mt. Midong. After selecting 5 trees at Mt. Worak and Mt. Midong, the cambium samples were collected using a mini trephor with 2 mm diameter from April 7 to October 6, 2017 at Mt. Worak, and from April 7 to September 29, 2017 at Mt. Midong. After the collected cambium samples were embedded in PEG2000, transverse thin sections with a thickness of 10 to 15 ㎛ were prepared using a microtome. One Larix kaempferi sample from each site, Mt. Worak and Mt. Midong, in which the accurate monitoring of cambial activity was impossible due to the formation of traumatic resin canal, was excluded from the study. The observation of the initiation date of cambial activity under a light microscopy revealed that 2 specimens from Mt. Worak and 3 from Mt. Midong showed the initiation on April 28. The remaining 2 specimens of Mt. Worak and 1 specimen of Mt. Midong were initiated on May 4, which was a week later than the others. The heat summation that induced the initiation of cambial activity was 196.4-271.8 at Mt. Worak and 204.7-277.3 at Mt. Midong, which was similar. The termination of cambial activity occurred between August 4 and 25 at Mt. Worak, and between August 4 and September 1 at Mt. Midong. Based on the above results, it was found that the optimal planting period for Larix kaempferi in Mt. Worak and Mt. Midong was before April, about a month before the cambium activity, and the felling period was from October when the cambial activity was completely terminated.