• Journal of Embryo Transfer
• /
• v.24 no.1
• /
• pp.33-37
• /
• 2009

Multiple ovulation and embryo transfer (MOET) has the potential to increase the rates of genetic improvement in cattle. Thus this study was performed to investigate several factors influencing in vivo embryo production in Holstein cattle under field conditions. The donors were superovulated with Folltropin-V and $PGF_2{\alpha}$ combination method. From Day 10 onward, donors were superovulated by i.m., twice daily, administration of 400mg Folltropin-V given in a series of decreasing doses over a 4-day period: on the first day, 3.5ml; on the second day, 3.0ml; on the third day, 2.0ml; and on the fourth day, 1.5ml (20ml in total, equivalent to 400mg of NIH-FSH-P1). Estrus was induced by i.m. administration of 25mg prostaglandin $F_2{\alpha}$ on the sixth and seventh of FSH treatment. Estrus detection was performed twice daily beginning 24h after the first prostaglandin $F_2{\alpha}$ injection. Donor cows were artificially inseminated 12 and 24 h after first standing estrus with semen from a proven Holstein sire. Embryos used in this study were recovered Day 7.5 of the cycle (Day 0: first standing estrus). From 195 superovulated dairy cows, 2,104 eggs were recovered, of which 1,172 were classified as transferable embryos based on morphological evaluation of quality. The results are summarized as follows: 1. The numbers of recovered and transferable embryos did not significantly differ among the capacity of milk production that were < 10,000kg/305days (group 1), $10,000{\sim}12,000\;kg$/305days (group 2) or > 12,000kg/305 days (group 3) (p>0.05, Table 1). 2. No differences in the numbers of recovered and transferable embryos were found among the donor's postparient days (p>0.05, Table 2). 3. Also, the numbers of recovered and transferable embryos of each superovulation seasons did not significantly differ among the four groups (p>0.05, Table 3).

• Journal of Ginseng Research
• /
• v.30 no.3
• /
• pp.165-171
• /
• 2006

For several thousand years, Korean ginseng has been used as a medicinal herb in the oriental countries. Korea is the ginseng suzerain and, for that reason, the ginseng as a special crop in Korea has been exported to the world market since the era of the three Kingdoms. Hong Kong is the pivot of ginseng import from all of the world. In 1970s, Korea ginseng had a high market share (about 30%) in Hong Kong. However, recently, the market share of Korean ginseng in Hong Kong has been significantly reduced due to the mass production from China and Canada. Besides, America with aggressive marketing strategy takes the leadership in the international ginseng market in Hong Kong. Therefore, it is necessary for Korea to know and understand world ginseng market condition and situation in Hong Kong. The objective of this study is to identify the actual import situation at international ginseng market in Hong Kong. This study analyzed the ginseng import demand model which effected by several price variables from major importing countries at the international ginseng market in Hong Kong. The findings of this study show that the import price of Korean ginseng has an effect on the quantity of ginseng imported from other countries in Hong Kong. In addition, the quantity of ginseng imported from Korea in Hong Kong is influenced by the import price of ginseng from other countries. In conclusion, Korean ginseng plays an important role at the international ginseng market in Hong Kong.

• 한국균학회소식:학술대회논문집
• /
• 2018.05a
• /
• pp.27-27
• /
• 2018

The production scale of mushroom cultivation in Korea is approximately 600 billion won, which is 1.6% of the Korean gross agricultural output. Annually, ca. 190,000 tons of mushrooms are harvested in Korea. Although the numbers of mushroom farms and cultivators are constantly decreasing, the total mushroom yields are increasing due to the large-scale cultivation facilities and automation. The recent expansion of the well-being trend causes increase in mushroom consumption in Korea: annual per capita consumption of mushroom was 3.9kg ('13) that is a little higher than European's average. Thus the exports of mushrooms, mainly Flammulina velutipes and Pleurotus ostreatus, have been increased since the middle of 2000s. Recently, however, it is slightly reduced. However, Vietnam, Hong Kong, the United States, the Netherlands and continued to export, and the country has increased recently been exported to Australia, Canada, Southeast Asia and so on. Canned foods of Agaricus bisporus was the first exports of the Korean mushroom industry. This business has reached the peak of the sale in 1977-1978. As Korea initiated trade with China in 1980, the international prices of mushrooms were sharply fall that led to shrink the domestic markets. According to the high demand to develop new items to substitute for A. bisporus, oyster mushroom (Pleurotus ostreatus) was received the attention since it seems to suit the taste of Korean consumers. Although log cultivation technique was developed in the early 1970s for oyster mushroom, this method requires a great deal of labor. Thus we developed shelf cultivation technique which is easier to manage and allows the mass production. In this technique, the growing shelf is manly made from fermented rice straw, that is the unique P. ostreatus medium in the world, was used only in South Korea. After then, the use of cotton wastes as an additional material of medium, the productivity. Currently it is developing a standard cultivation techniques and environmental control system that can stably produce mushrooms throughout the year. The increase of oyster mushroom production may activate the domestic market and contribute to the industrial development. In addition, oyster mushroom production technology has a role in forming the basis of the development of bottle cultivation. Developed mushroom cultivation technology using bottles made possible the mass production. In particular, bottle cultivation method using a liquid spawn can be an opportunity to export the F.velutipes and P.eryngii. In addition, the white varieties of F.velutipes were second developed in the world after Japan. We also developed the new A.bisporus cultivar "Sae-ah" that is easy to grown in Korea. To lead the mushroom industry, we will continue to develop the cultivars with an international competitive power and to improve the cultivation techniques. Mushroom research in Korea nowadays focuses on analysis of mushroom genetics in combination with development of new mushroom varieties, mushroom physiology and cultivation. Further studied are environmental factors for cultivation, disease control, development and utilization of mushroom substrate resources, post-harvest management and improvement of marketable traits. Finally, the RDA manages the collection, classification, identification and preservation of mushroom resources. To keep up with the increasing application of biotechnology in agricultural research the genome project of various mushrooms and the draft of the genetic map has just been completed. A broad range of future studies based on this project is anticipated. The mushroom industry in Korea continually grows and its productivity rapidly increases through the development of new mushrooms cultivars and automated plastic bottle cultivation. Consumption of medicinal mushrooms like Ganoderma lucidum and Phellinus linteus is also increasing strongly. Recently, business of edible and medicinal mushrooms was suffering under over-production and problems in distribution. Fortunately, expansion of the mushroom export helped ease the negative effects for the mushroom industry.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.550-558
• /
• 2007

The purpose of this study was to evaluate the insertion depth of several brands of master gutta percha cones after shaping by various Ni-Ti rotary files in simulated canals. Fifty resin simulated J-shape canals were instrumented with ProFile, ProTaper and HEROShaper. Simulated canals were prepared with ProFile .04 taper #25(n=10), .06 taper #25(n=10), ProTaper F2(n=10), HEROShaper .04 taper #25(n=10) and .06 taper #25(n=10). Size #25 gutta percha cones with a .04 & .06 taper from three different brands were used: DiaDent; META; Sure-endo. The gutta percha cones were selected and inserted into the prepared simulated canals. The distance from the apex of the prepared canal to the gutta percha cone tip was measured by image analysis program. Within limited data of this study, the results were as follows 1. When the simulated root canals were prepared with HEROShaper, gutta-percha cones were closely adapted to the root canal. 2. All brands of gutta percha cones fail to go to the prepared length in canal which was instrumented with ProFile, the cones extend beyond the prepared length in canal which was prepared with ProTaper. 3. In canal which was instrumented with HEROShaper .04 taper #25, Sure-endo .04 taper master gutta percha cone was well fitted(p < 0.05). 4. In canal which was instrumented with HEROShaper .06 taper #25, META .06 taper master gutta percha cone was well fitted(p < 0.05). As a result, we concluded that the insertion depth of all brands of master gutta percha cone do not match the rotary instrument, even though it was prepared by crown-down technique, as recommended by the manufacturer. Therefore, the master cone should be carefully selected to match the depth of the prepared canal for adequate obturation.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.151-172
• /
• 1998

Over the past two decades, the process of globalization of multinational corporations has increased at a rapid rate. One manifestation of this process is the establishment of corporate head offices in a variety of international centers to administer and coordinate, the day-to-day operations in the host countries. In establishing a subsidiary overseas a firm creates a direct link between the operations of the domestic corporate center and the foreign host center This paper investigates elements of stability and change in the international linkage patterns among domestic parent corporations and host subsidiaries over the past several decades. In particular, it seeks answers to a number of question related to stability and change in linkages among foreign centers of control and those Canadian centers selected to administer the subsidiary operations from 1970 to 1991 over the four primary sectors, namely, resources, manufacturing, services, and finance. By confirming the core stability and dispersed linkages hypotheses, the papar offers some generalizations with respect to the location and stability of subsidiary headquarters centers in Canada and their respective subsector specialties. Finally, it addresses further research avenues fer the quaternary place study.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.2
• /
• pp.229-250
• /
• 1993

This study was performed to investigate the morphological and structural changes of bone tissues and the effects of irradiation on the mandibular bodies of rats which were fed low calcium diets. In order to carry out this experiment, 160 seven-week old Sprague-Dawley strain rats weighing about 150 gm were selected and equally divided into one normal diet group of 80 rats and one low calcium diet group with the remainder. These groups were then subdivided into two groups, 40 were assigned rats for each subdivided group, exposed to radiation. The Group 1 was composed of forty non-irradiated rats with normal diet, Group 2 of forty irradiated rats with normal diet, Group 3 forty non-irradiated rats with low calcium diet, and Group 4 forty irradiated rats with low calcium diet. The two irradiation groups received a single dose of 20 Gy on the jaw area only and irradiated with a cobalt-50 teletherapy unit. The rats with normal and low calcium diet groups were serially terminated by ten on the 3rd, the 7th, the 14th, and the 21st day after irradiation. After termination, both sides of the dead rats mandible were removed and fixed with 10% neutral formalin. The bone density of mandibular body was measured by use of bone mineral densitometer(Model DPX -alpha, Lunar Corp., U.SA). Triga Mark ill nuclear reactor in Korea Atomic Research Institute was used for neutron activation and then calcium contents of mandibular body were measured by using a 4096 multichannel analyzer (EG and G ORTEC 919 MCA, U.SA). Also the mandibular body was radiographed with a soft X-ray apparatus(Hitex Co., Ltd., Japan). Thereafter, the obtained microradiograms were observed by a light microscope and were used for the morphometric analysis using a image analyzer(Leco 2001 System, Leco Co., Canada). The morphometric analysis was performed for parameters such as the total area, the bone area, the inner and outer perimeters of the bone. The obtained results were as follows: 1. In the morphometric analysis, total area and outer perimeter of the mandibular bodies of Group 3 were a little smaller than that of Group 1. The mean bone width and bone area were much smaller than that of Group 1 and the inner perimeter of Group 3 was much longer than that of Group 1. The total area and outer perimeter of Group 2 and Group 4 showed little difference. The mean bone width and bone area of Group 4 were smaller than that of Group 2 and the inner perimeter of Group 4 was longer than that of Group 2. 2. The remarkable decreases of the number and thickness of trabeculae and also the resorption of endosteal surface of cortical bone could be seen in the microradiogram of Group 3, Group 4 since the 3rd day of experiment. On the 21st day of experiment, the above findings could be more clearly seen in Group 4 than in Group 3. 3. The bone mineral density of Group 3 was lesser than that of Group 1 and the bone mineral density of Group 4 was lesser than that of Group 2 on the 7th, 14th, 21st days. The irradiation caused the bone mineral density to be decreased regardless of diet. In the case of Groups with low calcium diet, the bone mineral density was much decreased on the 21st day than on the 3rd day of experiment. 4. The calcium content in mandible of Group 3 was smaller than that of Group 1 throughout the experiment. roup 4 showed the least amount of calcium content. The irradiation caused the calcium content to be decreased regardless of diet. In the case of Groups with low calcium diet, the calcium content was much decreased on the 21st day than on the 3rd day of experiment. In conclusion, the present study demonstrated that morphological changs and decrease of bone mass due to resorption of bone by low calcium diet, and that the resorption of bone could be found in the spongeous bone and endosteal surface of cortical bone. So the problem of resorption of bone must be considered when the old and the postmenopausal women are taken radiotherapy because the irradiation seems to be accelerated the resorption of osteoporotic bone.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.43-52
• /
• 2006

Topical fluoride application for children is a widely peformed procedure in the field of pediatric dentistry to prevent dental caries. However, it is recently recognized as having some unwanted effects on several esthetic restorative materials as it roughens the surface of the restorative materials. The aim of this study was to evaluate the surface changes in composite resins to topical fluoride. Composite resins(Z $250^{(R)}$, Ultraseal $XT^{(R)}$ Filtek $flow^{(R)}$ $Revolution^{(R)}$, $Denfil^{(R)}$) in topical fluoride agents were immersed and their surface roughness, weight loss and SEM were evaluated. The results were as follows : 1. The 4 minutes-immersion groups showed more roughened surface than 1 minute-immersion groups and the control groups showed the smoothest surface among all the materials, and there was statistically significant difference except the revolution between the groups. 2. There was no significant difference between the 1 minute-immersion groups and 4 minutes-immersion groups in weight loss. 3. The experimental group treated with topical fluoride gel showed the generally mere roughened surface than control group in the SEM findings.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.25-34
• /
• 2006

Fluoride released from dental restorative materials effectively declines the incidence and activity of dental caries and inhibits tooth demineralization. This study investigated the fluoride release and uptake characteristics of one composite resin $(Z-250^{TM})$ three glass ionomer-based restorative material ($Dyract^{(R)}$ AP, Fuji II $LC^{(R)}$, Fuji IX GP $Fast^{(R)}$) Forty discs(6mm diameter and 1mm height) were prepared for each material. Each disc was immersed in 5ml of distilled water within polyethylene vial and stored at $37^{\circ}C$. The distilled water was changed every 24 hours and the release of fluoride was measured for 31 days. At the end of this period, each specimen was subjected to one of four treatments : (A) no fluoride treatment (control), (B) application of a fluoride dentifrice (500ppm) for three minutes three times; (C) application of the 1.23% acidulated phosphate fluoride(APF) foam for one minute once, (D) the same regimen as (B), plus application of the APF foam for one minute once. Then, all samples were reassessed for an additional 7 days. For all samples, the greatest fluoride release was observed after the first day of the study but diminished with time. On the 7th day of the study, fluoride release level was stabilized. Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$ released higher amount of fluoride than other materials ; however, no statistically significant difference was found from Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$. The amount of fluoride of $Dyract^{(R)}$ AP, Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$ was increased after fluoride treatment, and diminished with time.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.183-221
• /
• 2013

While in the early stages of space activities only a few states engaged in the use of outer space, as is well known, commercial space activities have grown dramatically in recent years. Both states, state institutions, and international governmental organizations as well as many private enterprises are engaged in such commercial use of outer space by now. This development is not reflected in the present state of space law. The existing international instruments of space law were developed and finalized before this development and thus only provide very few and sometimes unfitting provisions for the commercial use of outer space and particularly the use by private enterprises. Law formulated in an era when the word "privatization" had not even been coined cannot contain potential problems caused by the increasing commercialization of outer space. For the promotion and further development of such commercial use of outer space it is necessary to clarify and establish the legal framework for such use, because participants will need this information for their future investments in this field. The purpose of this paper is to research and make an analysis of the contents and international regulation of international space commerce, which is rapidly proliferating and to review the process of improvement on national legislations relating to the commercialization of outer space in a few main space advanced countries to make the sustainable progress of commercial space activities project in international society. The legal implications of matters such as international commercial launch services, the liability aspects of such services, intellectual property rights, insurance, product liability insurance and materials processing could one day will be subject to regulated by international space law as well as domestic law. In fact, the question of commercialization is linked to the question of sharing benefits of space activities, and this currently is an agenda item in the Legal Subcommittee of UN COPUOS. Most of developed countries have enacted the national legislation for commercial space activities relating to the development of our space as follows : The National Aeronautic and Space Act of 1958 and the Commercial Space Act of 1998 in the United States, Outer Space Act of 1986 in England, Establishment Act of National Space Center of 1961 in France, Canadian Space Agency Act of 1990 in Canada, Space Basic Act of 2008 in Japan, and Law on Space Activity of 1993 in Russia. Becides there are currently three national legislations relating to space development and commercial space activities in Korea as follows : Aerospace Industry Development Promotion Act of 1987, Outer Space Development Promotion Act of 2005, Outer Space Damage Compensation Act of 2008. Commercial space great promise for the utilization and expansion of human outer space activities but aspring commercial actors must recognize that foreign policy, as well as obligations to the international community as a whole, ensure that commercial space activities will not operate in a legal and regulatory vacuum. As commercial space matures the law and accompanying regulation will most certainly evolve and choose to become participants in the inevitable evolution of law and regulation.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.399-405
• /
• 2011

In this study, we evaluated the fruit quality indices and the incidence of physiological disorders of Korean new pear cultivar 'Whasan' to determine appropriate harvest time for exportation and to enhance storability and shelf-life of the fruits during simulated exportation and extending market environment under different temperature conditions. In the experiment of simulated exportation headed for North America including Canada and U.S.A., the fruits transported at $1^{\circ}C$ showed less weight loss than those of $5^{\circ}C$. Market temperature appeared as a key factor for keeping freshness of exported pear fruits rather than transportation temperature. Quality factors such as high flesh firmness and low incidence of fruit rot and physiological disorders including core breakdown and pithiness were attained at the fruits maintained at $18^{\circ}C$ when we compared with $25^{\circ}C$. The fruits of harvested early maturity at 135 day after full bloom showed 28.6 N of flesh firmness when the fruits stored at $1^{\circ}C$ of transportation and $18^{\circ}C$ of market temperature, while the fruits progressed $5^{\circ}C$ of transportation and $25^{\circ}C$ of market temperature dropped to 24.2 N during 30 days of shelf life. Also, a high incidences of physiological disorders and of fruit decay rates were obvious in the fruits distributed at $25^{\circ}C$ were observed approximately two times higher than the those of $18^{\circ}C$. Therefore, temperature management during marketing resulted as an important point for maintaining fruits quality in the process of pear fruit exportation.