• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.368-374
• /
• 2020

BACKGROUND: The residual analysis of polar pesticides has remained a challenge. It is even more difficult to simultaneously analyze multiple polar pesticides. Diquat, paraquat, and chlormequat are typical examples of highly polar pesticides. The existing methods for the analysis of diquat, paraquat and chlormequat are complex and time consuming. Therefore, a simple, quick and effective method was developed in the represent study for simultaneous analysis of diquat, paraquat and chlormequat in animal products, meat and fat using UPLC-MS/MS. METHODS AND RESULTS: Sample extraction was carried out using acidified acetonitrile and water and re- extracted with acidified acetonitrile and combine the extracts followed by centrifugation. The extract was then cleaned up with a HLB cartridge after reconstitution with acidic acetonitrile and water. The method was validated in quintuplicate at three different concentrations. The limits of detection (LOD) and quantification (LOQ) were 0.0015 and 0.005 mg/L, respectively. Matrix suppression effect was observed for all of the analytes. A seven point matrix matched calibration curve was constructed for each of the compound resulted excellent linearity with determination coefficients (R2) ≥ 0.991. Accuracy and precision of the method was calculated from the recovery and repeatability and ranged from 62.4 to 119.7% with relative standard deviation less than 18.8%. CONCLUSION: The recovery and repeatability of the developed method were in the acceptable range according to the Codex Alimentarius guideline. The developed method can be applied for the routine monitoring of diquat, paraquat, and chlormequat in animal products, meat and fat.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.296-305
• /
• 2022

In order to investigate maneuvering characteristics of KCS in waves, captive model test in regular waves was conducted. Purpose of the test is measuring maneuvering hull forces when ship is maneuvering in waves. Model test was carried out using CPMC (Computerized Planar Motion Carriage) of ocean engineering basin in KRISO (Korea Research Institute of Ships and Ocean engineering). Total 6 degrees-of-freedom motion were fixed by two points supporting captive model test device, which is specially designed for this test. This system estimates 6 degrees-of-freedom forces and moments through 12 strain gauge signals. Mapping matrix from strain gauge signals to 6 degrees-of-freedom forces and moments was derived by a well-organized calibration test. Static drift test was conducted in calm sea and in regular waves with various wave conditions. Hydrodynamic coefficients related to drift angle were extracted for each wave conditions, and the effect of waves on course stability was analyzed.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.737-746
• /
• 2022

Utilizing weather independent SAR images along with machine learning based object detector is effective in robust vessel monitoring. While conventional SAR images often applied amplitude data from Single Look Complex, exploitation of polarimetric parameters acquired from multiple polarimetric SAR images was yet to be implemented to vessel detection utilizing machine learning. Hence, this study used four polarimetric parameters (H, p₁, DoP, DPRVI) retrieved from eigen-decomposition and two backscattering coefficients (γ₀, _VV, γ₀, _VH) from radiometric calibration; six bands in total were respectively exploited from 52 Sentinel-1 SAR images, accompanied by vessel training data extracted from AIS information which corresponds to acquisition time span of the SAR image. Evaluating different cases of combination, the use of polarimetric indexes along with amplitude values derived enhanced vessel detection performances than that of utilizing amplitude values exclusively.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2725-2732
• /
• 2020

This paper presents the neutronics benchmark analysis of the first core of the Indonesian multipurpose research reactor RSG-GAS (Reaktor Serba Guna G.A. Siwabessy) calculated by the Serpent Monte Carlo code and the newly released ENDF/B-VIII.0 nuclear data library. RSG-GAS is a 30 MWth pool-type material testing research reactor loaded with plate-type low-enriched uranium fuel using light water as a coolant and moderator and beryllium as a reflector. Two groups of critical benchmark problems are derived on the basis of the criticality and control rod calibration experiments of the first core of RSG-GAS. The calculated results, such as the neutron effective multiplication factor (k) value and the control rod worth are compared with the experimental data. Moreover, additional calculated results, including the neutron spectra in the core, fission rate distribution, burnup calculation, sensitivity coefficients, and kinetics parameters of the first core will be compared with the previous nuclear data libraries (interlibrary comparison) such as ENDF/B-VII.1 and JENDL-4.0. The C/E values of ENDF/B-VIII.0 tend to be slightly higher compared with other nuclear data libraries. Furthermore, the neutron reaction cross-sections of ¹⁶O, ⁹Be, ²³⁵U, ²³⁸U, and S(𝛼,𝛽) of ¹H in H₂O from ENDF/B-VIII.0 have substantial updates; hence, the k sensitivities against these cross-section changes are relatively higher than other isotopes in RSG-GAS. Other important neutronics parameters such as kinetics parameters, control rod worth, and fission rate distribution are similar and consistent among the nuclear data libraries.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.3
• /
• pp.220-230
• /
• 2023

Imidacloprid is a neonicotinoid insecticide widely used for insect control in a variety of crops. The evaluation of imidacloprid total residues in animal feeds derived from crop by-products is required to ensure the safety of livestock products. We performed simultaneous LC/MS/MS analyses of imidacloprid and its metabolites in five different livestock products including beef, pork, chicken, milk and egg from domestic markets. The methods for sample preparation and instrumental analysis were established by modifying QuEChERS method to meet the Codex guidelines. The methods generated 0.0035 mg/kg of the limit of determination (LOD), 0.01 mg/kg of the limit of quantitation (LOQ) and standard calibration linearity with >0.983 of the coefficients of determination (R²). The methods exhibited the recovery values of imidacloprid and its metabolites ranging from 65.66 to 119.27% without any interference between matrices. Imidacloprid total residues in the livestock products were found as values lower than the LOQ and maximum residue limits (MRLs). This study suggests that the methods are successfully applicable for the safety evaluation of imidacloprid total residues in livestock products from domestic markets.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.891-897
• /
• 2021

There is a need for a technology that can quickly and accurately analyze soil carbon contents. Existing soil carbon analysis methods are cumbersome in terms of professional manpower requirements, time, and cost. It is against this background that the present study leverages the soil physical properties of color and water content levels to develop a model capable of predicting the carbon content of soil sample. To predict the total carbon content of soil, the RGB values, water content of the soil, and lux levels were analyzed and used as statistical data. However, when R, G, and B with high correlations were all included in a multiple regression analysis as independent variables, a high level of multicollinearity was noted and G was thus excluded from the model. The estimates showed that the estimation coefficients for all independent variables were statistically significant at a significance level of 1%. The elastic values of R and B for the soil carbon content, which are of major interest in this study, were -2.90 and 1.47, respectively, showing that a 1% increase in the R value was correlated with a 2.90% decrease in the carbon content, whereas a 1% increase in the B value tallied with a 1.47% increase in the carbon content. Coefficient of determination (R²), root mean square error (RMSE), and mean absolute percentage error (MAPE) methods were used for regression verification, and calibration samples showed higher accuracy than the validation samples in terms of R² and MAPE.

• Korean Journal of Veterinary Service
• /
• v.45 no.1
• /
• pp.39-45
• /
• 2022

The total bacteria count is significantly important factor for hygienic quality in raw milk. BactoScan FM^TM and BactoCount IBC^TM are the automated instruments for the determination of the total bacterial count in raw milk. They have been used after calibration by standard plate count (SPC) method in South Korea since 2000. It is necessary to re-evaluate for total bacterial counter according to the improvement of milk quality and the change of milk quality grade. Therefore, this study was evaluated the conversion mode of the two machines by SPC method. We collected 921 bulk-tank milk samples throughout the concentration range of 1,000~1,000,000 CFU/mL from June 2020 to October 2021. As a result, when compared by the SPC value, there was a slight difference in total bacterial count in BactoScan below 10,000 CFU/mL and above 200,000 CFU/mL and in BactoCount above 100,000 CFU/mL, respectively. Therefore, the conversion factor for BactoScan and the conversion equation for BactoCount were newly adjusted based on SPC value, and then the correlation coefficients (R²) was 0.85 or higher. In addition, the correlation (R²) between BactoScan and BactoCount was 0.91, which means the results were high positive correlation. These results are expected to contribute to improving the accuracy of the automated instruments for determining of total bacterial count in raw milk.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.519-528
• /
• 2006

An analytical method for the determination of thyroid hormones in urine samples has been studied by using solid-phase extraction and high-performance liquid chromatography/diode array detector/electro-spray mass spectrometry. Seven thyroid hormones were successfully separated by gradient elution on the reverse phase Hypersil ODS column (4.6 mm I.D., 100 mm length, particle size $5{\mu}m$) with ammonium formate buffer and acetonitrile, and UV spectra and mass fragment could be confirmed. The extraction recoveries of thyroid hormones in the urine samples (pH 3) were in the range of 89.0-113.1% with solid-phase extraction by C18, followed by elution with 4 ml of methanol/ammonium hydroxide (9 : 1). The calibration curves showed good linearity with the correlation coefficients ($r^2$) varying from 0.992 to 0.998 and the detection limits of all analytes were obtained in the range of 2-4 ng/ml (3.8-13.0 pmol/ml).

• Korean Journal of Veterinary Research
• /
• v.63 no.3
• /
• pp.23.1-23.9
• /
• 2023

This study was conducted to investigate tiamulin (TML) residues in the edible tissues of orally dosed broiler chickens and to re-establish the withdrawal time (WT). Thirty-six healthy Ross broiler chickens were administered 0.5 (TML-1) and 2.5 kg (TML-2) per ton feed, respectively, of the drug containing TML 78 g/kg for 10 days. Twenty-four tissue samples were collected from 6 chickens in each of the TML-1 and TML-2 groups on 0, 1, 3, and 5 days after drug administration, respectively. The residual concentrations of TML were measured using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The correlation coefficient of the calibration curves was 0.9978 to 0.9998, and the limits of detection and the limits of quantification (LOQ) were in the range of 0.03 to 0.06, and 0.1 to 0.2 ㎍/kg, respectively. Recoveries ranged between 89.0% to 116.7%, and the coefficients of variation were less than 13.9%. After the drug administration, TML in the TML-1 and TML-2 groups was detected above the LOQ in 1 and 6 samples of liver, respectively, at day 0, and in 1 liver sample from both groups on day one. At 3 days after administration, TML was detected below the LOQ in all samples of TML-1 and TML-2. The calculated WT of TML in both TML-1 and TML-2 using the WT calculation program WT 1.4 was 0 days. In conclusion, the developed analytical method is suitable for detection, and the calculated WT of TML in poultry edible tissues is shorter than the current recommended WT of 7 days for TML in broiler chickens.

• The Journal of Engineering Geology
• /
• v.34 no.2
• /
• pp.263-277
• /
• 2024

The availability of groundwater in the Yeoncheon area, South Korea, was estimated using the distributed hydrological model SWAT-K to calculate recharge rates based on land use and soil distribution. Model calibration and validation results were consistent between observed and simulated streamflows, with coefficients of determination of 0.75~0.97. Calculated groundwater recharge rates varied temporospatially, with lower rates in winter and spring than in summer. Estimated recharge rates were compared with the baseflow index of natural streamflow to assess the validity of estimated recharge amounts. Groundwater development potential was determined by calculating the recharge amount for a 10-year period by statistical frequency analysis, confirming it to be 11.5% of annual precipitation.