• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.477-484
• /
• 2014

Caldera is a large depression commonly formed by collapse of the ground following explosive eruption of a large body of stored magma. On earth, calderas and caldera complexes range in size from kilometers to tens of kilometers. Historical eruptions associated with caldera collapse have led to huge fatalities in Indonesia as well as left global impacts. This study presents case study on calderas in Indonesia which resembles to Mount Baekdu located at the border of China and North Korea; in the perspectives of similar characteristics, principal hazard, recent symptom of volcanic activity and the threat if eruption occurs in the near future. Calculation by using weighted evaluation matrix for Mount Krakatau, Mount Tambora, Mount Ijen, Tengger Caldera, Mount Rinjani and Ranau Caldera were taken for the selection of a site for future case study.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.3
• /
• pp.171-182
• /
• 1999

The Myeonbongsan caldera, 10.2X8.0 km, developed within older sequences of sedimentary formations and intermediate composition volcanis in the southern Cheongsong area. Volcanic rocks in the caldera block include lower intermediate volcanics, middle tuffaceous sequences and upper silicic ones. The silicic volcanics, which is named Myeonbongsan Tuff, are composed of crystal-rich ash-flow tuff(300 m) , bedded tuff(30 m) and pumice-rich ash-flow tuff(700 m) in ascending order. Several intrusions dominate the early sequences within the caldera. The caldera collapsed in a trapdoor type when silicic ash-flow tuffs erupted fro major vent area in the caldera. Normal faulting along a ring fault system except the southwestern part dropped the tuffs down to the northrase with a maximum displacement of about 820 m. The Myeonbongsan Tuff is just about 1,030 m thick inside the northeastern caldera, with its base not exposed, and southwestward thinning down. Rhyolitic plug and ring dikes are emplaced along the central vent and the caldera margins, and the ring dikes are cut by plutonic stocks in the southeastern and northwestern parts. The caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which silicic magma was erupted to form the Myeonbongsan Tuff. Following the last ash-flow eruption, collapse of the chamber roof resulted in the formation of the Myeonbongsan caldera, a subcircular trapdoor-type depression subsiding about 820 m deep. After the collapse, stony to flow-banded rhyolites were emplaced as circular plugs and ring dikes along the central vent and the caldera margins respectively. Finally after the intrusions, another plutons were emplaced as stocks outside the caldera.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.96-110
• /
• 1997

The Wondong Caldera, formed by the voluminous eruption of the rhyolitic ashflows of the Wondong Tuff which is about 1,550 m thick at the intracaldera and 550 m at the outflow, is a resurgent caldera which shows a dome structure on the central exposure of the caldera. The Wondong caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which rhyolitic magma was ejected, as small fallouts and voluminous ash-flows, to form the Wondong Tuff. The explosive eruptions began with ash-falls, progressed through pumice-falls and transmitted ash-flows. During the ash-flow phase the initial central vent eruption transmitted into late ring-fissure eruption which accompanied with caldera collapse. Contemporaneous collapse of the roop of the chamber resulted in the formation of the Wondong Caldera, a subcircular depression subsiding about 1,930 deep. Following the collapse, quartz porphyry was intruded as ring dykes along the ring fracture near the southwestern caldera rim. Subsequently the central part of the caldera floor began to be uplifted into a circular resurgent dome by the rising of residual magma. Concurrent with the resurgent doming, the volcaniclastic sediments of Hwajeri Formation were accumulated in the caldera moat and then rhyodacite lava erupted from the initial central resurgent dome and another ash-flow tuff from the northern ring fracture. After the sedimentation, the find-grained granodiorite was intruded as an arc along the eastern ring fracture of the caldera. Finally in the central part, the resurgent magma was emplaced as a hornblende biotite granite stock that formed the central dome.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.35-48
• /
• 2021

The Gumi basin, situated in the mid-southeastern Yeongnam Massif, has the Cretaceous stratigraphy that is divided into Gumi Formation, andesitic rocks (Yeongamsan Tuff, Busangni Andesite), rhyolitic rocks (Obongni Tuff, Doseongul Rhyolite, Geumosan Tuff) and Intrusives (ring dikes, other dikes) in ascending order. The Geumosan Tuff is composed mostly of many ash-flow tuffs which are associated with Geumosan caldera along with the ring dikes. The caldera is outlined by ring faults and dikes and has about 3.5 × 5.6 km in diameters. The intracaldera volcanics show a downsag structure that is dipped inward in their flow and welding foliations. The caldera block represent an asymmetric subsidence, which drops 350 m in the northern margin and 600 m in the southern one. Based on these data, the Geumosan caldera is geometrically classified as an asymmetric piston subsidence caldera that suggests a single caldera cycle. The caldera reflects the piston subsidence of the caldera block bounded by the outward-dipping ring faults following a voluminous eruption of magma from the chamber. The downsag in the caldera block refers to the downsagging during the initial subsidence at the same time as the full development of the bound fault. In the ring fissures following the sagging, magma was injected due to the overpressure of magma chamber caused by subsidence.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.3
• /
• pp.147-160
• /
• 1998

The Samrangjin Caldera, a trapdoor-type, formed by the voluminous eruption of the silicic ash-flows of the Samrangjin Tuff which is above 630m thick at the northern inside of the caldera and thinnerly 80m at the southern inside. The caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which silicic magma was ejected to form the Samrangjin Tuff. The explosive eruptions began with phreatoplinian eruption, progressed through small plinian eruption and transmitted with ash-flow eruption. During the ash-flow eruption, contemporaneous collapse of the roof of the chamber resulted in the formation of the Samrangjin caldera, a subcircular depression subsiding above 550m deep. During postcaldera volcanism after the collapse, flow-banded rhyolite was emplaced as cental plug along the central vent and ring dikes along the caldera margins. Subsequently rhyodacite porphyry and dacite porphyry were emplaced along the inner side of the ring dike. After their emplacement, residual magma was emplaced as a hornblende biotite granite stock into the southwestern caldera margin. In the northeastern part, the eastern dikes were cut final intrusions of granodioritic to granitic composition along the fault zone of $^{\circ}$W trend.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.4
• /
• pp.237-249
• /
• 2019

The volcanic rocks around the Jayang caldera are classified in an order such as Jukjang Volcanics, Doil Rhyolite, Unjusan Tuff and Rhyolite intrusions. By the SHRIMP U-Pb zircon datings from zircons, eruption ages of the Unjusan Tuff are constrained as 66.65±0.96 Ma in the intracaldera, and 66.08±0.62 Ma in the extracaldera outflow, and intrusion age of the ring dike is investigated as 60.74±0.66 Ma. The age data indicate that the caldera was collapsed between 66.08 Ma and 60.74 Ma, just before the dike intruded after the explosive eruption of the Unjusan Tuff. The Jayang caldera shows the composite igneous process of a perfect volcanic cycle passing from ash-flow tuffs through caldera collapse into ring dikes in the Jayang area.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.267-272
• /
• 2007

Uiseong subbasin belonging to Kyungsang basin resulted from volcanic activity in the late Cretaceous. In this study, we carry out MT and gravity survey at the Hwasan caldera, which was formed of volcanic and abyssal rocks complex, then analyze and identify geological substructure. Potential survey such as gravity and magnetic survey has been mainly carried out in former studies, so depth information for understanding substructure was not enough. To complement a potential survey, we use MT method, which has high vertical resolution. Moreover we make a simple 2D model comparing with former study. The result of MT and gravity 2D modeling shows that this area is roughly composed of 3 layers; The bottom layer is a basement. In the second layer, intrusive rocks having high resistivity is placed along the ring faults and the sedimentary layer of low resistivity is inside caldera. The highest layer is alluvium. To comprehend the 3D structure of the Hwasan caldera, we perform 3D gravity inversion, and construct the 3D model from the result of 3D gravity inversion. MT responses are calculated by using the constructed 3D model and the 3D model of the Hwasan caldera's structure is suggested after comparing the calculated values with the observed values at MT line.

• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.101-109
• /
• 1998

Using airborne magnetic data, magnetic characteristics were studied at the Samryangjin caldera area developed in the volcanics of the Yuchon sub-basin, the south eastern part of the Gyeongsang basin. Residual magnetics, reduction to the pole, horizontal derivative, and vertical derivative maps are prepared. Using these maps, the magnetic lithofaces are zoned and the geological structures such as caldera and faults were qualitatively interpreted. In addition, the two quantitative interpretations were performed. Firstly, the forward modelling were done to the 14.5 line km crossing the caldera area to the northeast-southwest direction. Applying the 3-D Euler deconvolution method to the whole study area, the depth extent and the characteristics of the magnetic anomalous bodies were studied. According to the results, the magnetic lithofaces of the area are zoned by 4 units. In general, these are well matched with the geological distributions. But the biotite granites intruded in the northern boundary of the Samryangjin caldera show the high magnetic intensity, while the biotite granites of the other areas show the low magnetic intensity and the different magnetic lithofaces. Thus, we interpreted that the biotite granites are closely related with the volcanic activity of the Samryngjin caldera, and are intruded in the fracture zones developed along the caldera rim. The Samryangjin caldera and fault structures of the area can be easily recognized by the distinct magnetic structures from the various magnetic anomaly maps. Also the topographic characteristics well reflect these structures. The results of the forward modelling show that the magnetic basement depth of the Gyeongsang sedimentary basin is on the average about 6 km and in maximum 10 km. And the depth becomes shallower toward the caldera boundary due to the shallow intrusion of the volcanics. The results of the 3-D Euler method also show the caldera and fault structures. And the relatively shallow magnetic anomalous bodies which are related with the volcanics are generally developed to the east-west and northeast directions, while the deep magnetic anomalous bodies to the northwest direction.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.243-246
• /
• 2006

Wavelet approach is regarded as a useful methodology for geo-environment analysis with respect to spatial objects with periodicity and spatial pattern, compared to autocorrelation analysis, Fourier analysis, variogram analysis and so on. However, there are a few case studies for geo-lineament characterization with the actual geo-based information such as remotely sensed imagery and DEM. In this study, wavelet approach in the Uiseung caldera region are carried out to delineate characterization for geolineament spatial pattern. There are high possibilities of the development of radial lineaments from the centre of round crater due to the eruption of a volcano and the subsidence of a crater. We have grasped the directionality of the whole linear structures of the caldera via rose diagram, and then performed wavelet analysis on the profiles of orthogonal directions for main directions of the lineaments. The result of this study is likely to be used as a fundamental data in order to grasp the outline of caldera structure prior to the close estimation

• Economic and Environmental Geology
• /
• v.24 no.1
• /
• pp.63-69
• /
• 1991

Gravity study was carried out to investigate the structure and total mass of the Bupyeong silver deposits closely related to formation of the Bupyeong caldera. Survey region covers $3.3{\times}6.6km^2$ over silver deposits and is comprised of 334 gravity measurement stations. An apparent regional gravity trend parallel to the west coast line is mainly attributed to isostasy. A least square isostasy model was used for the regional correction. A Fortan subroutine was coded to calculate 3-dimensional subsurface model. The calculated gravity values from the 3-dimensional model of the caldera with silver deposits agree with observed anomalies relatively well. Gravity anomaly due to Bupyeong silver deposits reaches to +3.5 mgal from the background value and anomaly due to the caldera reaches to -4 mgal. But the maximum negative anomaly of the caldera would be much greater at its center. The total mass of silver deposits calculated from the subsurface model is $4.19{\times}10^9$ tons. Although the economic part of silver deposits depends on the grade of orebody, we expect that there are still large amount of silver reserves in Bupyeong area.