• Architectural research
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2012

College of Architecture, Georgia Institute of Technology, Atlanta, GA, US Abstract The intermittent heating and cooling energy need calculation of the ISO 13790 monthly method was examined. The current ISO 13790 method applies a reduction factor to the continuous heating and cooling need calculation result to derive the intermittent heating and cooling for each month. This paper proposes a method for the intermittent energy need calculation based on the internal mean temperature calculation. The internal temperature calculation procedure was introduced considering the heat-balance taking into account of heat gain, heat loss, and thermal inertia for reduced heating and cooling period. Then, the calculated internal mean temperature was used for the intermittent heating and cooling energy need calculation. The calculation results from the proposed method were compared to the current ISO 13790 method and validated with a dynamic simulation using EnergyPlus. The study indicates that the intermittent heating and cooling energy need calculation method using the proposed model improves transparency of the current ISO 13790 method and draws more rational outcomes in the monthly heating and cooling energy need calculation.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.15 no.1
• /
• pp.7-9
• /
• 1978

In this calculation of statical stability of a ship, mechanical integrator was used most popularly and the direct calculation method such as a Barn's wedge method was also adopted in some cases. Both of the above method was developed for manual calculation which include mechanical integration or drafting procedure on body plan. Therefore, the computerization of stability calculation by the above method is very difficult. In this paper a simplified method for stability calculation is suggested, with based on hydrostatic data and immerged wedged characteristics.

• Management & Information Systems Review
• /
• v.23
• /
• pp.201-231
• /
• 2007

Taxi is one of the representative transpotation method in Korea. This is the study on the method of taxi fare calculation. So this study tries to find out the resonable method of taxi fare calculation. Many research institutes have tried to find out good method of taxi fare calculation. Until now, there has not been any standard method of taxi fare calculation. So the purpose of this study is to provide the best method of taxi fare calculation. This is the example of the method of taxi fare calculation. Both studies of related literature and empirical investigation have been reviewed to accomplish the purpose of this study.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.5
• /
• pp.611-619
• /
• 2013

In this study, Back Tracing Calculation Method was developed to determine the leakage location and leakage amount. Previously developed determination method of monitoring location and newly developed Back Tracing Calculation Method were applied to the sample pipe network and real size pilot plant. After leakage was assumed in the pilot plant, leakage location and leakage amount could be traced by Back Tracing Calculation Method. From the results, it was found that Back Tracing Calculation Method can be applied for the leakage detection in water distribution system. Furthermore, this method can be applied for the pressure management or leakage detection as a pressure control method in water distribution system.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.3
• /
• pp.27-38
• /
• 1986

In the recent years, the finite element method has been a leading method in calculating the strength of ship hull structural members. But such a calculation has many difficulties in constructing data, reducing CPU-time and connecting it with optimal design. This paper describes more efficient method for three dimensional strength calculation of the hull structure of oil tanker by using the slope-deflection method, and the computer program based on this method is developed. The results of the calculation by using this method are compared with those by using the SAP4 program based on the finite element method. Some advantages are obtained from the application of the slop-deflection method described in this paper in the calculation of the hull structure oil tanker.

• Asian Journal of Turfgrass Science
• /
• v.16 no.1
• /
• pp.41-47
• /
• 2002

For this study grasp quantitative humidity variation with planting stratification to various green space of calculation method, observed humidity distribution in the green space. with this data, coverage condition and humidity distribution, planting calculation method and humidity, planting stratification calculation method and humidity, analyzed by revolution analysis. In this result, as well as coverage condition, planting stratification effect humidity variation. increasing planting ratio (area) and planting volume (capacity) effect higher humidity. especially, if we compared between planting stratification calculation method and higher humidity, effect by a revolution coefficient and a correlation coefficient, effect relatively planting volume (capacity) higher than stratification ratio (area). today, in the index of higher humidity, planting calculation propose application of capacity method.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.5
• /
• pp.296-301
• /
• 2004

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. Available Transfer Capability (ATC) calculation is a complicated task, which involves the determination I of total transfer capability (TTC), transmission reliability margin (TRM) and capability benefit margin (CBM). As the electrical power industry is restructured and the electrical power exchange is updated per hour, it is important to accurately and rapidly quantify the available transfer capability (ATC) of the transmission system. In ATC calculation,. the existing CPF method is accurate but it has long calculation time. On the contrary, the method using PTDF is fast but it has relatively a considerable error. This paper proposed QFA method, which can reduce calculation time comparing with CPF method and has few errors in ATC calculation. It proved that the method can calculate ATC more fast and accurately in case study using IEEE 24 bus RTS.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.591-606
• /
• 2022

When the friction pendulum system and shear keys work together to resist the ground motion, which inclined inputs (non 45°) to the bridge structure, the shear keys in XY direction will be sheared asynchronously, endowed the friction pendulum system with a violent curvilinear motion on the sliding surface during earthquakes. In view of this situation, firstly, this paper abandons the equivalent linearization model of friction and constructs a Spring-Coulomb friction plane isolation system with XY shear keys, and then makes a detailed mechanical analysis of the movement process of friction pendulum system, next, this paper establishes the mathematical model of structural time history response calculation by using the step-by-step integration method, finally, it compiles the corresponding computer program to realize the numerical calculation. The results show that the calculation method in this paper takes advantage of the characteristic that the friction force is always µmg, and creatively uses the "circle making method" to express the change process of the friction force and resultant force of the friction pendulum system in any calculation time step, which can effectively solve the temporal nonlinear action of the plane friction; Compared with the response obtained by the calculation method in this paper, the peak values of acceleration response and displacement response calculated by the unidirectional calculation model, which used in the traditional research of the friction pendulum system, are smaller, so the unidirectional calculation model is not safe.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.53-56
• /
• 2014

A numerical method of magnetic field calculation for the air-core solenoid is presented in this paper. In application of the Biot-Savart law, the magnetic field induced from the source current can be obtained by a double integration ormula. The numerical method named composite Simpson's rule for the integration is applied to the program and the adaptive quadrature method is used to adjust the step size in the calculation according to the precision we need. When the target point is in the solenoid and the intergrand's denominator may be zeroin the process of calculation, the method sill can provide an appropriate result. We have developed a program which calculates the magnetic field with at least 1ppm precision and named it as rzBI() to implement this method. The method has been used in the design of an MRI magnet, and the result show it is very flexible and convenient.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.411-418
• /
• 2007

Sample size calculation is very important in clinical trials. In this paper, we propose sample size calculation method for non-inferiority trials using sample size calculation method suggested by Wang et al.(2003) based on Wilcoxon's rank sum test. Also, sample size comparison between parametric method and proposed method are presented.