• 지구물리와물리탐사
• /
• 제23권1호
• /
• pp.38-49
• /
• 2020

음향파 완전파형역산은 탄성파 탐사를 통해 얻은 관측자료와 음향파 모델링자료를 맞춤으로써 지층의 속도모델을 고해상도로 구축하는 최적화 과정이다. 기존의 스트리머를 이용한 해양 탄성파 탐사 자료에 대한 음향파 완전파형역산에서는 압력자료만을 활용하여 P파 속도모델을 구축한다. 그러나 최근 다성분 해저면 탄성파 탐사기술의 발달로 다성분자료의 취득 사례가 늘고 있으며, 이에 따라 해양에서 얻어지는 다성분 자료를 활용한 음향파 완전파형역산 기법에 대한 연구가 필요하다. 이 연구에서는 수평 및 수직 입자가속도 자료를 활용한 효과적인 음향파 완전파형역산 전략을 제시하고자 한다. 이를 위해, 우선 음향파 모델링으로 제작된 압력 및 입자가속도 자료와 민감도커널을 분석하여 파형역산 과정에서 각 자료의 성분별 특성을 관찰하였다. 압력 자료에 함께 나타났던 직접파, 다이빙파 및 반사파가 수직 및 수평 입자가속도 자료에서 파동의 진행방향에 따라 분리되어 나타나는 것을 확인하였으며, 수평 입자가속도 자료는 상부의 장파장구조를, 수직 입자가속도 자료는 하부의 장파장구조와 전체 영역에서의 단파장구조를 구축하는 데 효과적임을 확인할 수 있었다. 이러한 분석 결과를 바탕으로 입자가속도 자료만을 활용해 음향파 완전파형역산을 수행하는 순차적 자료 활용전략을 제시하며, 압력자료를 얻지 못하였거나 품질이 낮은 경우에도 입자가속도 자료를 활용하는 음향파 완전파형역산을 통해 양호한 P파 속도모델을 구축할 수 있을 것으로 기대된다.

• Smart Structures and Systems
• /
• 제11권5호
• /
• pp.453-476
• /
• 2013

DuraMote is a remote sensing system developed for the "NIST TIP project: next generation SCADA for prevention and mitigation of water system infrastructure disaster". It is designed for supervisory control and data acquisition (SCADA) of ruptures in water pipes. Micro-electro mechanical (MEMS) accelerometers, which record the vibration of the pipe wall, are used detect the ruptures. However, the performance of Duramote cannot be verified directly on a water distribution system because it lacks an acceptable recordable level of ambient vibration. Instead, a long-span cable-stayed bridge is an ideal test-bed to validate the accuracy, the reliability, and the robustness of DuraMote because the bridge has an acceptable level of ambient vibration. The acceleration data recorded on the bridge were used to identify the modal properties of the structure and to verify the performance of DuraMote. During the test period, the bridge was subjected to heavy rain, wind, and a typhoon but the system demonstrates its robustness and durability.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.94-98
• /
• 2003

최근 해양 자원 확보의 중요성이 증대됨에 따라 이들 자원의 탐사 및 해양 연구에 필요한 심해 잠수정의 개발이 국내에서 진행되고 있다. 이에 따라 본 연구에서는 ROV 진수 시 파랑 하중에 의해 발생하는 ROV 케이블의 장력 변화에 대한 정량적 평가를 수행하였다. ROV carrier는 국내에서 운용 중인 온누리호를 모델로 하였으며, 파도에 의해 발생하는 선체 운동 해석 결과를 토대로, 이들 운동에 의해 발생하는 케이블의 장력을 선체. A-frame 및 ROV의 물리적, 기하학적 특성을 고려한 연성 동력학 해석을 통해 구하였다. 해석은 유한 요소 해석을 기반으로 하는 조화 가진 해석을 수행하였고, 선체 운동은 선수파와 횡파에 대해 각각의 해석 결과를 도출하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.208-209
• /
• 2007

The measurement system is composed of the industrial computers installed in the console and the measurement racks mounted on each car. It is utilized to accumulate the data by the communication card and the optical cable. The optical cable and power cable are coupled at the connector located in joint of train to make easy to disconnect car each other. The signal conditioner is designed to choose and to extend the channel for each sensor readily, In this study, the programs for measurement and analysis were also developed to understand the traction system characteristics of TTX. Using this measurement system, we studied that acceleration test, re-powering test and gradually powering test. From the test results, we saw the performances of the traction systems are normal.

• Wind and Structures
• /
• 제27권6호
• /
• pp.357-368
• /
• 2018

For a long cable-stayed bridge, stay cables are its most important load-carrying components. In this paper, long-term monitoring of super-long stay cables of Sutong Bridge is introduced. A comprehensive data analysis procedure is presented, in which time domain and frequency domain based analyses are carried out. In time domain, the vibration data of several long stay cables are firstly analyzed and the standard deviation of the acceleration of stay cables, and its variation with time are obtained, as well as the relationship between in-plane vibration and out-plane vibration. Meanwhile, some vibrations such as wind and rain induced vibration are detected. Through frequency domain analysis, the basic frequencies of the stay cables are identified. Furthermore, the axial forces and their statistical parameters are acquired. To investigate the vibration deflection, an FFT-based decomposition method is used to get the modal deflection. In the end, the relationship between the vibration amplitude of stay cables and the wind speed is investigated based on correlation analysis. Through the adopted procedure, some structural parameters of the stay cables have been derived, which can be used for evaluating the component performance and corresponding management of stay cables.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.641-647
• /
• 2008

본 논문은 상시진동데이터로부터 구조물의 고유진동수 및 감쇠비를 추정하는 기법을 소개한다. 제안된 기법은 TDD기법에서 추출된 모드형상과 상호상관신호로부터 직교 잡음이 제거된 자유진동함수를 추출하고 시스템 인식기술을 적용하여서 각 모드별 고유진동수와 감쇠비를 추정한다. 제안 알고리즘의 정확도는 수치적으로 기존의 기법과 비교분석 되었다. 제안 알고리즘의 현장 적용성 검토는 서해대교 보강형의 수직방향 가속도에 대한 상시진동데이터를 통하여 검증되었으며, 총 24개의 저차모드가 추출되었다.

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.273-278
• /
• 2015

증가하는 전력 수요량을 충족시키기 위하여 송전 설비의 전기적인 용량이 커져야 한다. 고전력의 전기를 생산하고 전달하는 설비들은 대규모화될 뿐만이 아니라 높은 신뢰성으로써 동작하여야 한다. 따라서 전기설비가 안정상태에서 동작해야 한다는 것은 매우 중요한 과제이다. 고전력을 전달하기 위한 유일한 수단으로 체택되고 있는 케이블에서 전류에 의하여 줄 열이 발생하며, 열에 의하여 케이블 시스템의 열화가 발생한다. XLPE 케이블의 경우 $90^{\circ}$에서 30년 수명을 보장한다는 조건으로 제작, 설치 및 운영 되고 있으나, 실제 30 년 사용한 시점에서 수명이 종료될 것이라는 보장이 현재로서는 없는 상태이다. 이 논문에서 기존의 수명 이론을 바탕으로 활선 상태의 6.6 kV 케이블 9회선의 온도를 측정하고, 케이블의 온도와 수명의 상관관계를 파악하기 위하여 우리가 제작하여 (주)서부발전에 설치하여 운영하고 있는 장치를 소개한다.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.461-480
• /
• 2010

This paper analyses the data collected from the $2^{nd}$ Jindo Bridge, a cable-stayed bridge in Korea that is a structural health monitoring (SHM) international test bed for advanced wireless smart sensors network (WSSN) technology. The SHM system consists of a total of 70 wireless smart sensor nodes deployed underneath of the deck, on the pylons, and on the cables to capture the vibration of the bridge excited by traffic and environmental loadings. Analysis of the data is performed in both the time and frequency domains. Modal properties of the bridge are identified using the frequency domain decomposition and the stochastic subspace identification methods based on the output-only measurements, and the results are compared with those obtained from a detailed finite element model. Tension forces for the 10 instrumented stay cables are also estimated from the ambient acceleration data and compared both with those from the initial design and with those obtained during two previous regular inspections. The results of the data analyses demonstrate that the WSSN-based SHM system performs effectively for this cable-stayed bridge, giving direct access to the physical status of the bridge.

• Earthquakes and Structures
• /
• 제16권6호
• /
• pp.743-755
• /
• 2019

In this paper, a new system of seismic isolation for buildings - called suspended columns - is introduced. In this method, the building columns are placed on the hinged cradle seats instead of direct connection to the foundation. In this system, each of the columns is put on a seat hung from its surrounding area by a number of cables, for which cavities are created inside the foundation around the columns. Inside these cavities, the tensile cables are hung. Because of the flexibility of the cables, the suspended seats vibrate during an earthquake and as a result, there is less acceleration in the structure than the foundation. A Matlab code was written to analyze and investigate the response of the system against the earthquake excitations. The findings showed that if this system is used in a building, it results in a significant reduction in the acceleration applied to the structure. A shear key system was used to control the structure for service and lateral weak loads. Moreover, the effect of vertical acceleration on the seismic behavior of the system was also investigated. Effect of the earthquake characteristic period on the system performance was studied and the optimum length of the suspension cables for a variety of the period ranges was suggested. In addition, measures have been taken for long-term functioning of the system and some practical feasibility features were also discussed. Finally, the advantages and limitations of the system were discussed and compared with the other common methods of seismic isolation.

• Wind and Structures
• /
• 제20권2호
• /
• pp.249-274
• /
• 2015

Long-span cable-stayed bridges exhibit some features which are more critical than typical long span bridges such as geometric and aerodynamic nonlinearities, higher probability of the presence of multiple vehicles on the bridge, and more significant influence of wind loads acting on the ultra high pylon and super long cables. A three-dimensional nonlinear fully-coupled analytical model is developed in this study to improve the dynamic performance prediction of long cable-stayed bridges under combined traffic and wind loads. The modified spectral representation method is introduced to simulate the fluctuating wind field of all the components of the whole bridge simultaneously with high accuracy and efficiency. Then, the aerostatic and aerodynamic wind forces acting on the whole bridge including the bridge deck, pylon, cables and even piers are all derived. The cellular automation method is applied to simulate the stochastic traffic flow which can reflect the real traffic properties on the long span bridge such as lane changing, acceleration, or deceleration. The dynamic interaction between vehicles and the bridge depends on both the geometrical and mechanical relationships between the wheels of vehicles and the contact points on the bridge deck. Nonlinear properties such as geometric nonlinearity and aerodynamic nonlinearity are fully considered. The equations of motion of the coupled wind-traffic-bridge system are derived and solved with a nonlinear separate iteration method which can considerably improve the calculation efficiency. A long cable-stayed bridge, Sutong Bridge across the Yangze River in China, is selected as a numerical example to demonstrate the dynamic interaction of the coupled system. The influences of the whole bridge wind field as well as the geometric and aerodynamic nonlinearities on the responses of the wind-traffic-bridge system are discussed.