• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.95-96
• /
• 1998

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.179.1-179
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1398-1402
• /
• 1998

• BMB Reports
• /
• 제39권3호
• /
• pp.297-303
• /
• 2006

As lipolytic enzymes, GDSL lipases play an important role in plant growth and development. In order to identify their functions and roles, the full-length cDNA of a GDSL lipase gene, designated BnLIP2, was isolated from Brassica napus L. BnLIP2 was 1,300 bp long, with 1,122 bp open reading frame (ORF) encoding 373 amino acid residues. Sequence analysis indicated that BnLIP2 belonged to GDSL family. Southern blot analysis indicated that BnLIP2 belonged to a small gene family in rapeseed genome. RT-PCR analysis revealed that BnLIP2 was a tissue-specific expressing gene during reproductive growth and strongly expressed during seed germination. BnLIP2 expression could not be detected until three days after germination, and it subsequently became stronger. The transcript of this gene was deficient in root of seedlings growing at different stages. When juvenile seedlings were treated by methyl jasmonate (MeJ), salicylic acid (SA) and naphthalene acetic acid (NAA), BnLIP2 expression could not be induced in root. Our study implicates that BnLIP2 probably plays an important role in rapeseed germination, morphogenesis, flowering, but independent of root growth and development.

• 대한수학회보
• /
• 제52권4호
• /
• pp.1133-1138
• /
• 2015

In 1956, $Je{\acute{s}}manowicz$ conjectured that, for any positive integer n and any primitive Pythagorean triple (a, b, c) with $a^2+b^2=c^2$, the equation $(an)^x+(bn)^y=(cn)^z$ has the unique solution (x, y, z) = (2, 2, 2). In this paper, under some conditions, we prove the conjecture for the primitive Pythagorean triples $(a,\;b,\;c)=(4k^2-1,\;4k,\;4k^2+1)$.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.346-349
• /
• 2003

Microwave dielectric characteristics and physical properties of the new Zr$_{1-x}$ (Bn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ (0.2$\leq$x$\geq$ 1.0) system have been investigated as a function of the amount of Bn$_{1}$3/Nb$_{2/3}$ $O_2$substitution. With increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content (x), two phase regions were observed: $\alpha$-Pb $O_2$ solid solution (x<0.4), mixture of the rutile type Zn$_{1}$3/Nb$_{2/3}$Ti $O_4$ and the $\alpha$-Pb $O_2$ solid solution (x$\geq$0.4). In the$\alpha$-Pb $O_2$solid solution region below x<0.4, the Q.f$_{0}$ value sharply increased and the Temperature Coefficient of the Resonant Frequency(TCF) decreased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ contents while dielectric constant (K) showed nearly same value. In the mixture region above x$\geq$4, the dielectric constant and TCF increased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content. Zr$_{1-x}$ (Zn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ materials have excellent microwave dielectric properties with K=44.0, Q.f$_{0}$ : 41000 GHz and TCF =-3.0 ppm/$^{\circ}C$ at x=0.35.=0.35. x=0.35.=0.35.

• 한국표면공학회지
• /
• 제42권1호
• /
• pp.1-7
• /
• 2009

Resistive heating sources are widely used to prepare thin films by vapor deposition because they are cheap, and easy to install and handle in vacuum system. Graphite is one of materials used to make the resistive heating source, but until now only limited applications have been possible as it reacts easily with evaporating materials at high temperature. In this study, evaporation characteristics of aluminum have been investigated by using graphite boat thermally treated with BN powder. The employed graphite boat has been prepared by spray-coating BN power onto the cavity surface of the boat and thermal treatment with aluminum in vacuum at the temperature of more than $1400^{\circ}C$. The voltage-current characteristics as well as resistivity changes of the graphite boat have been investigated during aluminum evaporation according to the applied voltage and time. The evaporation aspect has been picturized during flash evaporation for 40 seconds based on the characterization results. The evaporation rate of the graphite boat has been compared with that of BN boat. The graphite boat showed some different characteristics compared with BN boat, in that the evaporation occurred at the last stage of flash evaporation. The film appearance according to the applied voltage has been compared, and also the reflectance of the resulting film has been investigated according to the film thickness. It has been found that the graphite boat thermally treated with BN powder can be used for aluminum evaporation without problem.

• 한국결정성장학회지
• /
• 제3권1호
• /
• pp.59-65
• /
• 1993

저항가열식 고진공증착기를 이용하여 압력센서로 사용될 수 있는 boron이 첨가된 다결정 silicon 박막이 제조되었다. 다결정 silicon 박막은 여러온도에서 quartz 기판위에 증착되었으며, boron은 BN 웨이퍼를 사용하여 확산로에서 doping하였다. $500^{\circ}C$의 기판온도에서 증착된 silicon 박막은 비정질이었으며, $600^{\circ}C$에서 결정을 보이기 시작하였고, $700^{\circ}C$에서 다결정이 되었다. $900^{\circ}C$에서 10분동안 boron을 dopion한 후, 박막의 비저항은 $0.1{\Omega}cm~1.5{\Omega}cm$의 범위에 있었으며, boron 밀도(농도)는 $9.4$\times$10^{15}~2.1$\times${10}^{17}cm^{-3}$이었고, 입자의 크기는 $107{\AA}~191{\AA}$이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.60-60
• /
• 2015

Nanosheets of graphene and related 2D materials have attracted much attention due to excellent physical, chemical and mechanical properties. Single-layer graphene (SLG) was first synthesized by Blakely et al in 1974 [1]. Following his achievements, we initiated the growth and characterization of graphene and h-BN on metal substrates using surface segregation and precipitation in 1980s [2,3]. There are three important steps for nanosheet growth; surface segregation of dopants, surface reaction for monolayer phase, and subsequent 3-D growth (surface precipitation). Surface phase transition was clearly demonstrated on C-doped Ni(111) by in situ XPS at elevated temperatures [4]. The growth mode was clarified by inelastic background analysis [5]. The surface segregation approach has been applied to C-doped Pt(111) and Pd(111), and controllable growth of SLG has been demonstrated successfully [6]. Recently we proposed a promising method for producing SLG fully covering an entire substrate using Ni films deposited on graphite substrates [7]. A universal method for layer counting has been proposed [8]. In this paper, we will focus on the effect of competitive surface-site occupation between carbon and other surface-active impurities on the graphene growth. It is known that S is a typical impurity of metals and the most surface-active element. The surface sites shall be occupied by S through surface segregation. In the case of Ni(110), it is confirmed by AES and STM that the available surface sites is nearly occupied by S with a centered $2{\times}2$ arrangement. When Ni(110) is doped with C, surface segregation of C may be interfered by surface active elements like S. In this case, nanoscopic characterization has discovered a preferred directional growth of SLG, exhibiting a square-like shape (Fig. 1). Also the detailed characterization methodologies for graphene and h-BN nanosheets, including AFM, STM, KPFM, AES, HIM and XPS shall be discussed.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1020-1025
• /
• 1998

Mn-Mo-Ni 저합금강의 중성자 조사에 따른 기계적(미세경도, 인장, 샤피충격시험) 및 자기적(포화자화, 보자력, 잔류자화, Barkhausen Noise(BN)진폭, BN에너지) 성질 변화를 측정하여 이들의 상관관계를 고찰하였다. 기계적 성질시험 결과, 중성자 조사로 인하여 항복강도, 인장강도, 미세경도 및 천이온도($T_{41J}$)는 증가하였고 최대흡수에너지(USE)는 감소하였으며, 인장 시험의 경우 용접금속에서는 모재와 비교했을 때 큰 변화가 없었다. 자기적 성질을 측정한 결과, 잔류자화, BN진폭, BN에너지는 감소하였고 보자력은 급격히 증가하는 것으로 나타났다. 기계적.자기적 성질변화의 상관관계에서 자기적성질인 보자력 증가에 따라 천이온도, 항복강도, 경도는 증가하고 USE는 감소하였고, BN진폭의 경우는 보자력과 반대의 경향을 보였다. 본 실험에서 중성자조사로 인한 기계적.자기적 성질변화가 일관성 있는 상관관계가 있음을 확인하였고, 이들의 변화를 통해 조사손상을 평가하는 데 이용 가능하다.