• 제목/요약/키워드: c-$Al_2O_3$

검색결과 2,878건 처리시간 0.029초

Catalytic Effects and Characteristics of Ni-based Catalysts Supported on TiO2-SiO2 Xerogel

  • Jeong, Jong-Woo;Park, Jong-Hui;Choi, Sung-Woo;Lee, Kyung-Hee;Lee, Chang-Seop
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권12호
    • /
    • pp.2288-2292
    • /
    • 2007
  • The catalytic activities of nickel-based catalysts were estimated for oxidizing acetaldehyde of VOCs exhausted from industrial facilities. The catalysts were prepared by sol-gel methods of SiO2 and SiO2-TiO2 as a xerogel followed by impregnating Al2O3 powder with the nickel nitrate precursor. The crystalline structure and catalytic properties for the catalysts were investigated by use of BET surface area, X-ray diffraction (XRD), Xray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) techniques. These results show that nickel oxide is transformed to NiAl2O4 spinel structure at the calcination temperature of 400 °C in response to the steps with after- and co-impregnation of Al2O3 powder in sol-gel process. The NiAl2O4 could suppress the oxidation reaction of acetaldehyde by catalysts. The NiO is better dispersed on SiO2-TiO2/Al2O3 support than SiO2/Al2O3 and SiO2-TiO2-Al2O3 supports. From the testing results of catalytic activities for oxidation of acetaldehyde, Catalysts showed a big difference in conversion efficiencies with the way of the preparation of catalysts and the loading weight of nickel. The catalyst of 8 wt.% Ni/TiO2-SiO2/Al2O3 showed the best conversion efficiency on acetaldehyde oxidation with 100% conversion efficiency at 350 °C.

γ-Al2O3 촉매상에서 열분해와 가수분해에 의한 NF3 촉매분해 특성 (Catalytic Decomposition of NF3 by Thermal Decomposition and Hydrolysis of γ-Al2O3)

  • 김용술;박노국;이태진
    • 공업화학
    • /
    • 제26권2호
    • /
    • pp.154-158
    • /
    • 2015
  • 본 연구에서는 $NF_3$의 분해를 위한 ${\gamma}-Al_2O_3$의 촉매활성을 조사하였다. $NF_3$ 분해반응은 고정층 촉매반응기에서 $330{\sim}730^{\circ}C$ 범위의 반응온도와 $3,000{\sim}15,000mL/g-cat{\cdot}h$의 공간속도 조건에서 수행되었고, $NF_3$의 열분해 반응이 촉매분해반응와 비교를 위하여 함께 수행되었다. $400^{\circ}C$의 촉매분해 반응에서 $NF_3$의 전화율은 열분해 반응보다 4배 정도 높았으며, ${\gamma}-Al_2O_3$상에서 $NF_3$의 반응거동은 스팀의 존재에 따라 두 가지 반응경로를 나타내는 것으로 확인되었다. 스팀이 존재하지 않은 조건에서는 기체-고체 반응에 의해서 $NF_3$에 함유된 불소성분은 $AlF_3$로 전이되고, 스팀이 존재하는 조건에서는 가수분해에 의한 촉매적 분해반응이 일어난다. 또한 $NF_3$$500^{\circ}C$ 이상에서 NOx와 HF로 완전히 분해되는 것으로 FT-IR분석에서 확인되었다.

MgO-${Al_2}{O_3}$-$SiO_2$계 결정화유리의 제조 및 물성평가 (Preparation and Characterization of Glass-ceramics in MgO-${Al_2}{O_3}$-$SiO_2$ Glass)

  • 손성범;최세영
    • 한국세라믹학회지
    • /
    • 제37권6호
    • /
    • pp.604-611
    • /
    • 2000
  • Glass-ceramics containing a cordierite (2MgO-2Al2O3-5SiO2) as a main crystal phase was prepared from MgO-Al2O3-SiO2 system glass through a controlled 2-step heat treatment for the application to magnetic memory disk substrate for higher storage capacity. Parent glasses prepared with addition of CeO2 as a fulx and TiO2 as a nucleating agent were crystallized by a 2-step heat treatment i.e. nucleation and crystal grwoth. Then the maximum nucleation and crystal growth rates were investigated and several properties such as bending strength, surface hardness and surface roughness were also studied for heat treated glass. As a result, only a $\alpha$-cordierite was precipitated as a main crystal phase for all heat treatment conditions and the maximum nucleation and crystal growth rates were 2.4$\times$109/㎣.hr at 80$0^{\circ}C$ and 0.3${\mu}{\textrm}{m}$/hr at 915$^{\circ}C$ respectively. After being nucleated at 80$0^{\circ}C$ for 5 hours and then crystallized at 915$^{\circ}C$ for 1 hour, the heat treated glass had a crystal volume fraction of 17.6% and crystal size fo 0.3${\mu}{\textrm}{m}$, and showed the optimum properties for the application to magnetic memory disk substrates as follows. ; Bending strength of 192 MPa, Vidkers hardness of 642.1kgf/$\textrm{mm}^2$, and surface roughness of 27$\AA$.

  • PDF

$Si_3N_4-Al_2O_3-SiO_2$계의 1,$700^{\circ}C$에서 생성하는 화합물의 상관계 및 미구조 (Phase Relations and Microstructure of Comounds in the $Si_3N_4-Al_2O_3-SiO_2$ system at $1700^{\cire}C$)

  • 이의종;김환
    • 한국세라믹학회지
    • /
    • 제16권4호
    • /
    • pp.206-212
    • /
    • 1979
  • The phase relations and microstructure appeared at 1700℃ in a system of Si3N4-Al2O3-SiO2 were studied. The samples were pressurelessly sintered at 1700℃ for 1hr and reheated at 1600℃ for 1hr under nitrogen atmosphere. The compounds formed were identified by X-ray diffraction method and the microstrues were observed by SEM. The stable phases appeared in this system were X-phase, Si2ON2, β'-Si3N4 and Mullite. From the results of those experiments, it was concluded that the X-phase has very close composition to that proposed by G, K. Layden, Si3Al6O12N2. SEM photographs showed that Si2ON2 was a plate phase and X-phase was a rectagular plate phase.

  • PDF

불소운모 합성에 따른 $K_2O-MgO-Al_2O_3-SiO_2-MgF_2$계의 연구 (The Study of $K_2O-MgO-Al_2O_3-SiO_2-MgF_2$ System in Fluro-phlogopite Synthesis.)

  • 송경근;오근호;김대웅
    • 한국세라믹학회지
    • /
    • 제20권1호
    • /
    • pp.37-42
    • /
    • 1983
  • An attempt was made to derive a possible synthetic mechanism of Fluoro-phlogopite (Mica, 4Mg.$Al_2O_3$.$6SiO_2$.$K_2O$.$2MgF_2$) The pevention of fluorine vaporization turned out to be the key in the synthesis of Mica in question.l Consequently the quinary system of Mica was seperately synthesized ; frist 4MgO.$Al_2O_3-6SiO_2$(ternary system) was sintered at 135$0^{\circ}C$ and $K_2O$ and $MgF_2$ were added and second 4MgO.$Al_2O_3-6SiO_2$.$K_2O$ (quarternary system) was heat-treated at 135$0^{\circ}C$ and $MgF_2$ was added. The ternary system resulted in Proto-enstatite Cordierite and Spinel phases while Forsterite and Leucite were shown in the quarternay system . In both methods Fluoro-phlogopite was systhesized but the solid state reactions to form Mica from the ternary system and the quarternary system were different. High temperature reactions in the formation of Mica were investigated employing XRD, DTA and SEM The study of the synthesis of Mica indirectly suggested a method of phase analysis of quinary system(MgO-$Al_2O_3-SiO_2-K_2O-MgF_2$) and quarternary system(MgO-$Al_2O_3-SiO_2-K_2O-MgF_2$) at various temperatures.

  • PDF

Pt/Co/Ba/Al2O3에 Fe 첨가가 수소 풍부 NSR 반응성에 미치는 영향 (Effect of Fe Addition on Hydrogen Rich NSR Kinetics over Pt/Co/Ba/Al2O3 Catalyst)

  • 김진걸;전지용;김성수
    • 한국수소및신에너지학회논문집
    • /
    • 제23권6호
    • /
    • pp.581-587
    • /
    • 2012
  • Thermal aging effect on NSR kinetics was studied over Pt/Co/Fe/Ba/$Al_2O_3$ catalyst. The amount of $NO_x$ uptake over Pt/Co/Fe/Ba/$Al_2O_3$ calcined at $400^{\circ}C$ increased with increasing NSR temperature from $200^{\circ}C$ to $400^{\circ}C$, where amount of $NO_x$ uptake is the highest at $400^{\circ}C$ with mol ratio of $NO_x$/Ba = 0.5. Thereafter, the amount of $NO_x$ uptake at $400^{\circ}C$ decreased with the higher calcination temperature, where Pt/Co/Fe/Ba/$Al_2O_3$ catalyst calcined at $700^{\circ}C$ showed an amount of $NO_x$ uptake with the mol ratio of $NO_x$/Ba=0.062. Result of XRD and NSR showed that Fe addition into Pt/Co/Fe/Ba/$Al_2O_3$ suppressed sintering of Pt crystallites and make $NO_x$ uptake larger, compared to no addition of Fe into Pt/Co/Fe/Ba/$Al_2O_3$ catalyst. From BET result, it was found that the change of specific surface area was relatively small by the thermal aging process. Therefore, it was found that the sintering of Pt crystallites caused the decrease of $NO_x$ uptake during NSR reaction and Fe played a role to suppress the sintering process of Pt crystallites caused by thermal aging.

CaCO3와 Al2O3를 이용한 CaO-Al2O3계 클링커 합성 (Synthesis of CaO-Al2O3 System Clinker Using CaCO3 and Al2O3)

  • 이윤수;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 춘계 학술논문 발표대회
    • /
    • pp.238-239
    • /
    • 2018
  • This paper presents the synthesis results of CaO-Al2O3 system clinker using the CaCO3 and the Al2O3 according to the synthesis methods dependent on the temperature. The purpose of this study is the formation of the CaO-Al2O3 system clinker containing high ratio of CaO·2Al2O3 (CA2). The maximum sintering temperature for the synthesis of CaO-Al2O3 compounds was 1250℃, 1300℃ and 1400℃. The CaO-Al2O3 compounds was sintered at the maximum sintering temperature for three hours. After sintering, the compounds was analyzed using X-ray diffraction method. The 12CaO·7Al2O3 (C12A7) and CaO·Al2O3 (CA) increased as elevating the maximum sintering temperature whereas the CA2 decreased. Especially, at the 1250℃ of maximum sintering temperature, the un-reacted CaO and Al2O3 was identified.

  • PDF

$Si_2O-Al_2O_3$계의 열팽창성에 관한 연구 (Study on Thermal Expansion of $Si_2O-Al_2O_3$ System)

  • 이종근;이병하;전승관
    • 한국세라믹학회지
    • /
    • 제17권3호
    • /
    • pp.141-144
    • /
    • 1980
  • Thermal expansion property of $SiO_2-Al_2O_3$ system consisted of Muan clay, Hadong Pink Kaolin and Dangjin Silica was studied. Specimens were heated at the constant rate of 18$0^{\circ}C$/hr to the max. temperatures of 115$0^{\circ}C$ to 130$0^{\circ}C$ with an interval of $25^{\circ}C$, and matured for 3hrs. The result of X-Ray diffraction analysis showed that main crystals formed were $\alpha$-quartz, $\alpha$-cristobalite and mullite. Linear thermal expansion was measured at 90$0^{\circ}C$. The results of the linear thermal expansion were decreased regularly with the increase of the sintering temperature in accordance with the following equation. $y=5$\chi$\perp1100^{\circ}$. Where $\chi$ is amounts of kaolin (wt%), and y is temperature of the changing point of linear thermal expansion.

  • PDF

D.C. Magnetron Sputter를 이용한 (Ti, Al)N 피막의 고온산화특성 (High Temperature Oxidation Characteristics of the (Ti, Al)N Coating on the STS 304 by D.C. Magnetron Sputtering)

  • 최장현;이상래
    • 한국표면공학회지
    • /
    • 제25권5호
    • /
    • pp.235-252
    • /
    • 1992
  • (Ti, Al)N films were deposited on 304 stainless steel sheet by D.C. magnetron sputtering using Al target and Ti plate. The high temperature oxidation of (T, Al)N films with the variation of composition has been investigated. The chemical composition of (Ti, Al)N films with the variation of composition has been investigated. The chemical composition of (Ti, Al)N films was similar to the sputter area ratio of titanium to aluminum target by means of EDS and AES survey. The high temperature oxidation test of (Ti, Al)N showed that (Ti, Al)N has better high temperature resistance than TiN and TiC films. TiC films were cracked at 40$0^{\circ}C$ in air TiN films quickly were oxidised at $600^{\circ}C$, were spalled more than $700^{\circ}C$. But (Ti, Al)N films are relatively stable to$ 900^{\circ}C$. The good resistance to high temperature oxida-tion of (Ti, Al)N films are due to the formation of dense Al2O3 and TiO2 oxide layer. Especially, Al2O3 oxide layer is more important. The results obtained from this study show, it is believe that the (Ti, Al)N film by D.C. magnetron sputtering is promising for the use of high temperature and wear resistance mate-rials.

  • PDF

에멀젼을 이용한 $Al_2O_3$-$ZrO_2$ 복합분체의 제조(IV) : 에멀젼-분무열분해법 (Preparation of $Al_2O_3$-$ZrO_2$Composite Powders by the Use of Emulsions(IV) : Emulsion-Spray Pyrolysis Method)

  • 현상훈;김동준
    • 한국세라믹학회지
    • /
    • 제27권8호
    • /
    • pp.955-964
    • /
    • 1990
  • A new process of emulsiion-spray pyrolysis for synthesizing ceramic powders was developed and the characteristics of Al2O3-20w/o ZrO2 composite powders prepared by this method were investigated. The composite powders synthesized in this study were spherical dense particles with 0.1~0.4${\mu}{\textrm}{m}$ of diameter. As found in powders derived by the emulsion-hot kerosene drying method, all zirconia in Al2O3-20w/o ZrO2 powders heat-treated at 120$0^{\circ}C$ was in the tetragonal form at room temperature. The relative density and the fracture toughness of composites sintered at 1$650^{\circ}C$ for 4hrs were 95% and 5.2MPa.m1/2, respectively.

  • PDF