• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1137-1143
• /
• 2001

In this study, glass-ceramics containing cordierite(2MgO$.$2Al$_2$O$_3$5SiO$_2$) as a major crystalline phase was prepared from MAS (MgO-Al$_2$O$_3$-SiO$_2$) glass system for the application to reflector. Glasses prepared with addition of TiO$_2$as a nucleating agent were crystallized by two-step heat treatment of nucleation and crystal growth. Then nucleation and crystal growth behavior were investigated and the influence of heat treatment schedule on the nature of crystal phases and the diffuse reflectance spectrum was investigated. As a result, cordierite and rutile were precipitated as a major crystalline phases for the glass-ceramics with the nucleation at 750$^{\circ}C$ for 3 hours and then crystallization at 1100$^{\circ}C$ for 5 hours, and this glass-ceramics showed the reflectance over 90% in 570∼2500nm specturm region.

• Journal of the Korean Magnetics Society
• /
• v.9 no.6
• /
• pp.296-300
• /
• 1999

Cross-shape structures of spin tunneling junctions were fabricated using DC magnetron sputtering and metal masks. The film structures were $substrate/Ta/NiFe/FeMn/NiFe/CoFe/Al_2O_3/CoFe/NiFe$ and $substrate/Ta/NiFe/CoFe/ Al_2O_3/CoFe/NiFe/FeMn/NiFe$. Fabrication conditions of insulating layer ($Al_2O_3$) and thickness and sputtering power of each film layer were varied, and maximum magnetoresistance ratio of 24.3 % was obtained. Magnetic characteristic variations in the above mentioned two structures and two types of substrates (Corning glass 7059 and Si(111)) were compared. Annealing of the junctions was performed to find out magnetic characteristic variations expected from the device fabrication. Magneoresistance Ratio were observed to maintain as-deposited value up to 150 $^{\circ}C$ annealing and then to drop rapidly after 180 $^{\circ}C$ annealing.

• Journal of the Korean Ceramic Society
• /
• v.16 no.3
• /
• pp.142-154
• /
• 1979

The effects of microstructures and some additives $(CoO and Al_2O_3$) on the magnetic properties such as initial permeability, $\mu$-T curve, coercive force, and magnetic induction of MnZn ferrites have been studied. The powder was prepared by Hot Petroleum Drying Method. The basic composition of MnZn ferrites was 25.5mole % MnO, 22.0 mole% ZnO, 52.5 mole% $Fe_2O_3$. CoO in a concentration range from 0.05 to 0.5 mole% and $Al_2O_3$ from 2.5 to 7.5 mole% were added. Sintered density increased up to 97.5% of theoretical density. Permeability increased as average grain size increased, and that coercive force decreased as average grian size increased. Magnetic induction increased as sintered density increased. The variation of initial permeability with temperature in a temperature range from 0$^{\circ}$ to $60^{\circ}C$ was lowered (a flatter $\mu-T$ curve) as sintering temperature decreased. The compensation temperature To ofmagnetocrystalline anisotropy constant K1 and initial permeability varied with the species and amount of additives. When 0.05 mole% CoO was added to the basic composition, initial permeability at $15^{\circ}C$ increased from 5200 to 5900. The variation ofinitial permeability with temperature in a temperature range from 0^{\circ}to $60^{\circ}C$ was smaller (a flatter $\mu$-T curve) than that of the basic composition of Mn Zn ferrites. When 2.5 mole% $Al_2O_3$ was added, initial permeability at $15^{\circ}C$ decreased from 5200 to 3000. But the variation of initial permeability with temperature in a temperature range from 0$^{\circ}$to $60^{\circ}C$ was smaller (a flat ter $\mu-T$ curve) than when 0.05 mole% CoO was added. Experimental results showed that the conditions necessary for the occurrence of a very high permeability and a flat $\mu$-T curve were controversial even in a temperature range from $0^{\circ}$to $60^{\circ}C$.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.69-72
• /
• 2002

B $i_{3.3}$L $a_{0.7}$ $Ti_3$ $O_{12}$(BLT) 강유전체 박막을 $Al_2$ $O_3$/Si 기판위에 졸-겔(sol-gel)법으로 스핀 코팅하여 Metal-Ferroelectric-Insulator-Silicon (MFIS) 구조를 형성하였다. 박막의 결정화를 위해 as-coated 박막을 산소분위기에서 $650^{\circ}C$ 및 $700^{\circ}C$에서 30분 동안 후속열처리를 실시하였다. BLT 박막의 열처리 온도를 $650^{\circ}C$에서 $700^{\circ}C$로 증가시킴에 따라서 c축으로 우선 배향되는 경향을 보였으며, FWHM 값이 감소하여 결정성이 향상됨을 확인할 수 있었다. $700^{\circ}C$에서 열처리된 BLT 박막의 memory window는 약 2.5V (인가전압 5V)를 나타내었으며, 누설전류는 약 1.5x$10^{-7}$ A/$\textrm{cm}^2$를 나타내었다.다.다.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.338-346
• /
• 1997

Mechanical properties of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites fabricated by the reaction squeeze casting were compared with those of ($15%Al_2O_3{\cdot}SiO_2$)/Ai composites. Al-Ni intermetallic compounds ($10{\sim}20 {\mu}m$) formed by the reaction between nickel powder and molten aluminum were uniformly distributed in the Al matrix. These intermetallic compounds were identified as $Al_3Ni$ using X-ray diffraction analysis and they resulted in beneficial effects on room and high temperature strength and wear resistance. Microhardness values of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composite were greater by about 100Hv than those of ($15%Al_2O_3{\cdot}SiO_2$)/Al composite. Wear resistance of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites was superior to that of ($15%Al_2O_3{\cdot}SiO_2$)/Al composites regardless of the applied load. While tensile and yield strength of ($10%Al_2O_3{\cdot}SiO_2+5%Ni$)/Al hybrid composites were greater at room temperature and $300^{\circ}C$, strength drop at high temperature was much smaller in hybrid composites.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1502-1504
• /
• 2003

최근 전자기기의 경박단소화 추세는 전자기기의 크기와 가격의 감소를 이끌었으며 이러한 추세는 앞으로 지속될 것이다. 이와 같은 현상으로 전자기기를 구성하는 요소의 절반이상을 차지하는 단위수동소자의 경우 소형화를 넘어 박막화 및 집적화가 절실히 요구되는 실정이다. 따라서 본 연구에서는 현재 GHz 대역의 휴대용 무선통신 송 수신부 등에 사용되고 있는 기판이 $Al_2O_3$ 기판인 점을 고려하여 기판의 공통화를 위해 $Al_2O_3$ 기판 위에 Ta/$Ta_2O_5$/Ta 구조를 갖는 MIM 박막커패시터를 제작하여 그 특성을 고찰하였다. 모든 박막의 증착은 RF-magnetron reactive sputtering법에 의해 이루어졌으며, 유전체 열처리는 $700^{\circ}C$ 진공상태에서 60 sec 동안 수행하였다. XRD 분석결과, as-deposited $Ta_2O_5$ 박막은 열처리 후에 비정질상에서 결정질상으로 변환되었다. Ta/$Ta_2O_5$/Ta/Ti/$Al_2O_3$ 커패시터의 전기적 특성으로는 C-F, C-V, I-V 를 측정하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.53-60
• /
• 2014

Different kinds of post-deposition annealing (PDA) by a rapid thermal process (RTP) are used to enhance the field-effect passivation of $Al_2O_3$ film in crystal Si solar cells. To characterize the effects of PDA on $Al_2O_3$ and the interface, metal-insulator semiconductor (MIS) devices were fabricated. The effects of PDA were characterized as functions of RTP temperature from $400{\sim}700^{\circ}C$ and RTP time from 30~120 s. A high temperature PDA can retard the passivation of thin $Al_2O_3$ film in c-Si solar cells. PDA by RTP at $400^{\circ}C$ results in better passivation than a PDA at $400^{\circ}C$ in forming gas ($H_2$ 4% in $N_2$) for 30 minutes. A high thermal budget causes blistering on $Al_2O_3$ film, which degrades its thermal stability and effective lifetime. It is related to the film structure, deposition temperature, thickness of the film, and annealing temperature. RTP shows the possibility of being applied to the PDA of $Al_2O_3$ film. Optimal PDA conditions should be studied for specific $Al_2O_3$ films, considering blistering.

• Journal of the Korean Ceramic Society
• /
• v.23 no.5
• /
• pp.86-92
• /
• 1986

As there is a growing trend to make high quality steel improving production efficiency and utilizing slag as resources the technologies of hot metal pretreatment have been progressed to meet these demands. Although mill scale $Na_2CO_3$ and CaO used as fluxes proved to be excellent agents then can severely corrode refractories such as chamotte and high alumina for torpedo or open ladle car. Thus it was considered necessary to develop new refractories which can endure suchy conditions. Desulfurization fluxes vastly used in POSCO are $CaCO_3$ and CaO Recent trials have been made by testing phenol resin bonded $Al_2O_3-SiC-C$ bricks in torpedo ladle car for hot metal pretreatment. The results showed that the life of this brick became about 1.2 times longer than that of foreign products. And the crushing strength M.O.R corrosion resistance and oxidation resistance were tested.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.89-94
• /
• 1988

Alumina gel was prepared by the hydrolysis of aluminum isopropoxide Al(OC3H7i)3 at low temperature. Sample were calcined at the various temperatures for 10 houres in the electric furnace, respectively. In order to investigate the various propertis-thermal properties, pore size and distribution, and the transition of crystals, infrared spectroscopy, thermal analysis, particle size analysis, scanning electron microscopy, and porosimetry were employed. Transparent alumina gel was opalized at 1200$^{\circ}C$. Porosity was about 87% with pores below 0.7$\mu\textrm{m}$ and 55% at 1200$^{\circ}C$. The gel was transformed along the rising of temperature as follows; Boehmite\longrightarrow$\delta$-Al2O3\longrightarrow$\theta$\longrightarrowAl2O3\longrightarrow${\alpha}$-Al2O3.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.55-62
• /
• 1997

P2O3-PbO-SiO2-Al2O3계 조성을 이용하여 저온에서 소결이 가증하며 열팽창계수와 유전율이 낮은 회로기판용 glass ceramics를 제조하고자 하였다. 155$0^{\circ}C$에서 2시간 동안 용 융하여 제조한 모유리의열팽창 거동을 확인하기 위하여 TMA로 열분석을 실시하였으며 이 유리를 분말화하여 80$0^{\circ}C$에서 열처리 하였다. 이때 cristobalite 형성억제제로 Ga2O3를 사용 하였으며 Ga2O3 첨가량에 따른 억제 영향을 XRD를 통행 확인하였다. Ga2O3를 첨가한 유리 분말로 pellet을 제조하여 열처리를 하였고 소결시편의 표면을 SEM을 통해 관찰하였다. 열 처리한 pellet에 silver paste를 screen printing하여 유전율을 측정하였으며 조성에 따른 유 전율의 변화를 확인하였다.