• Animal cells and systems
• /
• 제3권2호
• /
• pp.149-151
• /
• 1999

It has been suggested that the bush warbler (Cettia diphone borealis) uses different song types in various situations. We analyzed song features and conducted playback experiments in order to reveal the function of songs of the bush warbler. Two song types were identified. The short song type has a shorter song duration than that of normal song types and consists of only one or two syllables. Due to its short syllable and low amplitude of the whistle portion, we were able to discriminate the short song type (S song type). from the normal song type (N song Type). In the playback experiments, bush warblers sang high rates of short song type for the first three minutes after playback. After 6 minutes of playback, males changed to singing normal songs. These results suggest that the short song of the bush warbler may function to threaten or drive off intruding males.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.100-105
• /
• 2000

Correlation between propagation of bush-type electrical tree and internal partial discharges(PD) was discussed. We used specimens with needle-plane electrode system made of LDPE(Low Density Polyethylene), observed inception and propagation of electrical tree by optical microscope interfaced with computer and investigated characteristics of phase resolved PD pulses accompanying with propagation of electrical tree. Electrical tree generally growed bush-type tree. PD data detected and analyzed were average discharge current and statistical operator of q-n, $\psi$- $q_{avg}$, $\psi$-n, ${\psi}-q_{max}$ distribution. Parameters used were skewness, kurtosis, average discharge phase, cross-correlation factor, asymmetry and etc. In generally, average discharge current had good linear relationship with propagation of bush type electrical tree on this experiment. Peak discharge magnitude and repetition rate were increased, but they had not good linear relationship.p.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.859-866
• /
• 2010

Generally, a fixed type guide-bush system is installed during machining miniature work-pieces with high precision in the multi-task CNC lathe. But a conventional guide-bush system does not provide a constant clamping force under the condition of varying work-piece diameters. It is important to maintain a constant clamping force for guaranteeing machining precision. This paper proposes a new guide-bush system with a pneumatic clamping device for the CNC Swiss-turn lathe to keep constant clamping force with changes in work-piece diameters. Through performance tests, new clamping system developed in the study showed better machining precision at the cost of a small increase in the temperature of the system than conventional systems due to an increase in the frictional heat and a change in the heat transfer route.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권4호
• /
• pp.26-33
• /
• 1993

트리열화 현상을 감지하기 위한 노력으로 음향방출 펄스를 계측할 수 있는 자동계측 시스템을 자체 개발하였다.가교 폴리에틸렌(이하 XLPE라 부른다)시편에 교번전압 15[kV]을 인가했을 때 수초형 트리(bush-type tree)로의 개시 및 진전시 수초형에서 가지형(branch-type tree)으로 진전할 때는 음향방출 평균펄스 진폭(이하 펄스평균 진폭이라 부른다)이 작은 펄스가 많이 발생하였고, 가지형에서 수초형 트리로 진전할 때에는 큰 펄스진폭을 갖는 작은 수의 펄스수를 계측할 수 있다. 이로써 작은 진폭을 갖는 많은 펄스진폭 및 펄스수에 대한 3차원의 분포양상으로서 왜도(Skewness)가 방전의 특성량임을 확인하였고, 왜도를 이용한 S-평면상의 궤적(Trajectory) 변화시 원점에서 멀어질수록 파괴에 가까워짐을 알았다.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.330-334
• /
• 2009

Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.453-458
• /
• 2008

Under driving condition, A vehicle experiences various kinds of loads, which brings on the buckling and fracture of suspension systems. Lower control arm (LCA), which consists of 2 bush joints and 1 ball joint connection, is the one of the most important parts in the suspension system. The bush joints absorb the impact load and reduce the vibration from the road. When analyzing the LCA behavior, it is important to understand the material properties and boundary conditions of bushing systems correctly, because of the nonlinearity characteristics of the rubber. In this paper, in order to predict the large scale deformation of the LCA more precisely, three factors are newly suggested, that is, coupling of bush stiffness between translation and rotation, bush extraction force and maximum rotation angle of ball joint. LCA stiffness is estimated by CAE and component test. Analysis and test results are almost same and the validity of considering three factors in LCA analysis is verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2060-2062
• /
• 1999

When the high voltage is applied on insulation materials that have voids and impurities inner one, then probability of electrical tree inception is increased at defects. Electrical tree gives a profit to degradation analysis, because it is possible to observe by eyes and provides electrical degradation step. And electrical tree is divided to three types in usual - tree type, bush type and chestnut type tree. But these three types are divided not by method of quantitative analysis but visual and experiential analysis. In this paper, three types of electrical tree were calculated by quantitative analysis using fractal mathematics and classified to fractal dimensions (FD). FD of tree types are 1.1$\sim$1.4, bush types are 1.4$\sim$1.6 and chestnut type trees have above 1.6 FD.

• The Korean Journal of Ecology
• /
• 제19권2호
• /
• pp.141-149
• /
• 1996

This study was to examine the occurrence of geographic song variation and its pattern of transitional direction among bush warbler populations distributed in Korea and Japan, Bush warbler songs (n=283) of 25 males from Cheongwon and Jeju, Korea, and from Chiba, Japan were analyzed. Chiba individuals had more song types and had the higher dominant frequency and longer duration of the introductory whistle portion than Cheongwon and Jeju individuals. In measure of eight song parameters, the parameters constantly showed a decreasing or increasing tendency. The constant tendency showed direction related with the geographic location from Chiba to Cheongwon. The difference in song parameters between Cheongwon and Chiba populations was the greatest in comparison to that of other sets of geographic populations. The degree of discrimination among the three populations was 92.00%. These results indicate that there is a geographic song variation between bush warblers of Japan and Korea, and that the song transition has been directed from Chiba (Japan) through Jeju to Cheongwon (Korea).

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.87-90
• /
• 2014

The effects of electric field frequency on the ac electrical treeing phenomena in an epoxy/reactive diluent/layered silicate (1.5 wt%) were carried out, in needle-plate electrode arrangement. A layered silicate was exfoliated in an epoxy base resin, by using our ac electric field apparatus. To measure the treeing propagation rate, constant alternating current (AC) of 10 kV with three different electric field frequencies (60, 500 and 1,000 Hz) was applied to the specimen, in needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. As the electric field frequency increased, the treeing propagation rate increased. At 500 Hz, the treeing propagation rate of the epoxy/PG/nanosilicate system was $0.41{\times}10^{-3}$ mm/min, which was 3.4 times slower than that of the epoxy/PG system. The electrical treeing morphology was dense bush type at 60 Hz; however, as the frequency increased, the bush type was changed to branch type, having few branches, with very slow propagation rate.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.7-15
• /
• 2008

Currently existing high-accuracy and high-speed die sets used in reciprocal press create scratches at the surface of guide posts, steel balls, and bushes due to vertical movement of balls with point-contacts between inner surface of bushes and guide posts. Consequently, accuracy of the die set and the life span of the metal mold are reduced. However, those scratches could reduce the pre-load of the steel ball. This research designed and developed a groove-type die set which improves life span of the die set by eliminating point-contacts of steel balls with guide posts. The guide post consisted of a steel-ball retainer, a steel-ball retainer stopper, a guide bush, a guide pin, a snap ring, and a spring. The steel-ball retainer has 72 holes with 8 columns of 9 holes in each column. The inner surface of the guide bush was grinded(surface roughness: $Ra\;\\;0.2{\mu}m$, accuracy: $0\;{\sim}\;-0.002mm$) after NC turning and heat treatment. Also, a line of small intermediate pocket was processed inside of the guide bush for lubrication and elimination of foreign materials. Guide grooves of steel balls were processed using a wire EDM(Electrical Discharge Machining) after heat treatment. With such a design of the guide post stated above, loads against steel balls could be dispersed greatly by the line contacts through the guide groove between the guide post and the guide bush, and the life span of the guide post could be expanded semi-permanently.