• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.111-116
• /
• 2018

This study were carried out to evaluate the efficiency of using burn-type $CO_2$ generators in greenhouse for cultivation 'Seolhyang' strawberry ($Fragaria{\times}ananassa\;Duch.$) during winter season. The concentration of $CO_2$ was 200 to $600{\mu}mol{\cdot}mol^{-1}$ in the control, and 800 to $1,100{\mu}mol{\cdot}mol^{-1}$ in using burn-type $CO_2$ generator between 6 and 11 hours. At other times, it was observed that at similar concentration in the control and using burn-type $CO_2$ generator. Measured greenhouse air temperature inside the of using burn-type $CO_2$ generator was $2{\sim}3^{\circ}C$ higher than the control at 6 ~ 10 am. There was no temperature difference between treatments after 11 o'clock. Plant height, leaf length, leaf width, root diameter, fresh weight, and dry weight were not different between treatments. The marketable yield (kg/10a) of using burn-type generator were 4,131 kg, which was 519 kg higher than the control. Therefore, the total fruit yields increased 17% compared to the control.

• Child Health Nursing Research
• /
• v.4 no.1
• /
• pp.97-104
• /
• 1998

Burns in children result in the loss of precious life, or if the child survives, in much suffering from physical, emotional, social, and economic problems. These burn accidents to children happen in the bustle of family life and frequently without any warning. With this background information, this study was designed to identity types of burns in children and mothers' attitudes towards, and knowledge of burn prevention, in order, to not only, in still a safety consciousness regarding the seriousness of burn accidents and the strengthening prevention, but also as basic data towards the development of an educational program aimed at prevention. From May 1 to May 25 in 1997, data were collected from the mothers of children attending five day care centers and kindergartens located in Seoul, which had been selected for the study. The tools used for the study, which were developed by the researchers, surveyed the type of burns suffered by children, mothers' knowledge of burns and attitudes toward burn accidents. The data were analyzed through real numbers percentages and analysis was done using SPSS computer programs. The results of the study show that the most frequent type of burn accidents were those caused by hot water(55.4%) and these were frequently related to everyday habits that easily lead to danger. Further, the first aid treatment following a burn was weak. The majority of the mothers had not instructed their children on who to contact in the case of a fire, first aid for burns, or how to take escape in the case of a fire. This left the children in a defenseless position in case of a fire. The mothers showed a lack knowledge, on what to do when a blaze is discovered, how to put out a fire, first aid for burns, escaping from a fire and appropriate water temperature, in that 50% of the time they answered incorrectly. From this study a prevention program, HIPP (Home Injury Prevention Program) could be developed that includes fire prevention habits and first aid for burns. This program can be used with kindergarten and elementary school children for group education on fire prevention and can be used as a foundation for construction of a system of facilities and equipment to prevent fires and also prevent injury from fires.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.521-526
• /
• 2008

Purpose: Most burn scar contractures are curable with skin grafts, but free flaps may be needed in some cases. Due to the adjacent tissue scarring, local flap is rarely used, and thus we may consider free flap which gives us more options than local flap. However, inappropriate performance of free flap may lead to unsatisfactory results despite technical complexity and enormous amount of effort. The author will discuss the points we should consider when using free flaps in treating burn scar contractures Methods: We surveyed patients who underwent free flaps to correct burn scar contractures from 2000 to 2007. We divided patients into two groups. The first group was those in which free flaps were inevitable due to exposure of deep structures such as bones and tendons. The second group was those in which free flap was used to minimize scar contracture and to achieve aesthetic result. Results: We performed 44 free flap on 42 patients. All of the flaps were taken well except one case of partial necrosis and wound dehiscence. Forearm free flap was the most common with 21 cases. Most of the cases(28 cases) in which free flaps were inevitable were on the wrist and lower limbs. These were cases of soft tissue defect due to wide and extensive burns. Free flaps were done in 16 cases to minimize scar contracture and to obtain aesthetic outcome, recipient sites were mostly face and upper extremities. Conclusion: When using free flaps for correction of burn scar contractures, proper release and full resurfacing of the contracture should be carried out in advance. If inadequate free flap is performed, secondary correction is more challenging than in skin grafts. In order to optimize the result of reconstruction, flap thickness, size and scar of the recipient site should be considered, then we can achieve natural shape, and minimize additional correction.

• Korean Journal of Radiology
• /
• v.24 no.12
• /
• pp.1173-1175
• /
• 2023

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

This study was performed to estimate non-$CO_2$ greenhouse gases (i.e., GHGs) emission from biomass burning at a local scale. Estimation of non-$CO_2$ GHGs emission was conducted using Landsat TM satellite imagery in order to assess the damage degree in burnt area and its effect on non-$CO_2$ GHGs emission. This approach of estimation was based on the protocol of the 2003 IPCC Guidelines. In this study, we used one of the most severe fire cases occurred Samcheock in April, 2004. Landsat TM satellite imageries of pre- and post-fire were used 1) to calculate delta normalized burn ratio (dNBR) for analyzing burnt area and burn severity of the Samcheok large-fire and 2) to quantify non-$CO_2$ GHGs emission from different size of the burnt area and the damage degree. The analysis of dNBR of the Samcheok large-fire indicated that the total burnt area was 16,200ha and the size of the burnt area differed with the burn severity: out of the total burnt area, the burn severities of Low (dNBR < 152), Moderate (dNBR = 153-190), and High (dNBR = 191-255) were 35%, 33%, and 32%, respectively. It was estimated that the burnt areas of coniferous forest, deciduous forest, and mixed forest were about 11,506ha (77%), 453ha (3%), and 2,978ha (20%), respectively. The magnitude of non-$CO_2$ GHGs emissions from the Samcheok large-fire differed significantly, showing 93% of CO (44.100Gg), 6.4% of CH4 (3.053Gg), 0.5% of $NO_x$ (0.238Gg), and 0.1% of $N_2O$ (0.038Gg). Although there were little changes in the total burnt area by the burn severity, there were differences in the emission of non-$CO_2$ GHGs with the degree of the burn severity. The maximum emission of non-$CO_2$ GHGs occurred in moderate burn severity, indicating 47% of the total emission.

• International Journal of Automotive Technology
• /
• v.2 no.4
• /
• pp.147-155
• /
• 2001

Analysis of the thermodynamic cycle of IC engine from the point of view of economy and emissions was carried out. From this analysis potential capability of engine development was derived. This potential capability is lean-burn engine, fuelled with homogeneous mixture with $\lambda \geq$ 1.4. Several different modes of fuelling were proposed and tested on one-cylinder test engine from the point of view of extending lean operating limit of the engine, emissions and fuel economy. Among them were: fuelling with evaporated preheated gasoline, with gas (LPG evaporated) and with liquid butane. From these modes, fuelling with liquid butane injected to inlet port was selected and finally tested. This novel system of fuelling offered better than standard engine performances and emissions at lean operating limit. These results were validated on full-scale two-cylinder engine.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.159-165
• /
• 1999

Experimental studies have been performed to observe the basic phenomena of waste bed combustion in MSW incinerator. A reduced scale apparatus was utilized to simulate the combustion behavior in real plant with 1-dimensional transient behavior at the experimental setup, which uses wet cubic wood with ash content as simulated waste. LHV (lower heating value) of solid fuel, fuel particle size and flow rate of combustion air were taken as important parameters of the bed combustion. For the quantitative analysis, FPR (flame propagation rate), TBT (total burn-out time) and PBT (particle burn-out time) was defined. LHV represent the capability of heat release of the fuel, so that a higher LHV results in faster reaction rate of the fuel bed, which is shown by higher FPR. Fuel particle size is related with surface area per unit mass as well as heat and mass transfer coefficient. As the particle size increases the FPR decreases owing to decreasing specific surface area. Air injection supplies oxygen to the reaction zone. However oversupply of combustion air increases convection cooling of the bed and possibly extinguishes the flame.

• Korean Journal of Occupational Health Nursing
• /
• v.22 no.2
• /
• pp.121-129
• /
• 2013

Purpose: This study is designed to verify affecting variables to turnover intention of nurses in general hospital. Methods: The data were from the self-reported questionnaire responses of 168 nurses in five general hospitals 300-400 beds in Seoul and Gyungi province and analyzed by frequency and percentage, t-test, ANOVA and Sheffe's test and stepwise multiple regression. Results: The means of turnover intention were $3.14{\pm}0.87$, job overload, $3.54{\pm}0.67$, role ambiguity, $2.87{\pm}0.71$ and burnout, $2.68{\pm}0.72$. A significant correlation was found among turnover intention and job overload (r=.24, p<.001), role ambiguity (r=.30, p<.001), and burn out (r=.58, p<.001). The factors that affect turnover intention from the result of multiple regression by the stepwise selection, were emotional exhaustion, role ambiguity, and diminished personal accomplishment. Conclusion: Based on the results, to reduce turnover intention of nurses, emotional support should be provided and also range of roles be clearly defined. In addition, it is needed to improve the working conditions for nurses to get a sense of accomplishment.

• Korean Journal of Adult Nursing
• /
• v.29 no.3
• /
• pp.290-301
• /
• 2017

Purpose: This study was aimed to identify the level of emotional labor, job stress and professional quality of life and to identify the factors affecting on professional quality of life among nurses in long-term care hospitals. Methods: 136 nurses working at eight different long-term care hospitals were recruited from May 1 to June 30, 2016. Data were analyzed by descriptive statistics, t-test, ANOVA, Pearson correlation, and stepwise multiple regression using SPSS/WIN 22.0. Results: Professional quality of life is consisted of three subcategories as compassion satisfaction, secondary traumatic stress and burn-out. As for the factors affecting on compassion satisfaction, age, satisfaction on working ward and shift pattern of duties were significant factors. The three variables' explanation power on compassion satisfaction was 25.0%. As for factors affecting on secondary traumatic stress, emotional labor was a significant factor. The emotional labor's explanation power on secondary traumatic stress was 13.0%. Factors affecting on burn-out, emotional labor, age, and health condition were significant factors. The three variables' explanation power on burnout is 31.0%. Conclusion: On the basis of results, program development are required to relieve emotional labor and job stress for nurses at long-term care hospitals and to improve their professional quality of life.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.482-484
• /
• 2000

압전 세라믹은 공정 조건에 따라 압전 및 전기적 특성이 큰 영향을 받는다. 최적의 조건을 갖는 압전변압기를 제조하기 위해서는 이런 공정의 변수들의 변화를 관찰할 필요성이 있다. 본 논문에서는 이런 압전 특성을 관찰하고자, 하소의 온도를 $850^{\circ}C$에서 $900^{\circ}C$도까지 시간변화에 따라 phase 변화를 XRD로 관찰하고 burn out의 온도에 따른 기공변화 및 소결의 온도변화에 따른 임피던스 어낼라이저로 주파수 특성을 관찰하였다. 이렇게 조사해본 결과 하소를 $900^{\circ}C$에서 3시간 burn out을 $500^{\circ}C$에서 2시간, 소결을 $1250^{\circ}C$에서 2 시간 한 경우가 $Q_m>1000$, $k_p>0.40$ 값을 얻을 수 있었다.