• 한국건축시공학회지
• /
• 제10권3호
• /
• pp.91-97
• /
• 2010

현재 건물 부력에 대한 보호조치로 경제성 및 효율성 측면을 고려하여 영구배수 공법의 사용이 증가하고 있다. 영구배수공법은 건축물에 접하는 지하수를 외부로 배수시켜 건축물에 작용하는 부력을 근본적으로 제거하는 공법으로, 영구배수공법 사용시 유출지하수가 발생하게 된다. 또한 우리나라는 국제인구행동연구소(PAI)에서 지정한 물 부족 국가로 지정되어 유출지하수의 활용이 요구되고 있지만 이에 대한 평가프로세스가 아직 충분하지 않다. 따라서 본 연구는 현장 적용 사례를 통해 현장 단위에서 유출되는 지하수의 활용여부를 결정할 수 있는 평가 프로세스를 구축하고 경제성을 분석하였다. 그 결과 상수도와 비교한 10년간 상수절감 비용을 통해 유출지하수의 활용이 가능한 것으로 나타났다.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.235-241
• /
• 2016

Underwater weapon system is required to structurally strong material, since as it is directly exposed to external shock. It should also be using the lightweight material in order to take advantage of buoyancy. Composite materials meet these requirements simultaneously. Particularly in the case of submarine, composite materials are widely used. It is important to have a high strength enough to be able to withstand external shock, but it is also important to attenuate it. In a method for the shock damping, viscoelastic damping materials are inserted between the high strength composite material as a sandwich structure. Shock attenuation can be evaluated in the loss factor. In ASTM(American Society of Testing Materials), evaluation method of the loss factor of cantilever specimens is specified. In this paper, mode tests of the cantilever are performed by the ASTM standard, in order to calculate the loss factor of the viscoelastic damping material by the specified expression. Further, for verifying of the calculated loss factor, mode test of compound beams is carried out. In addition, the characteristics of the material were analyzed the effect on the loss factor.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.112-122
• /
• 1993

자유수면하에서 유한한 속도로 진행하는 2차원 수중익 주위에 발생하는 부분 및 초월 공동문제를 포텐셜을 기저로 하는 양력판 이론에 의해 해석하였다. 2차원 수중익 주위에 선형화된 자유표면 조건, 방사조건 및 무한수심 경계조건을 만족하는 법선 다이폴과 쏘오스를 분포함으로써 양력 및 캐비티 문제를 표현하였다. 수중익 표면에서의 역학적 경계조건은 수중익 내부의 전유동이 0이라는 조건으로 등치 되었고, 캐비티 표면에서의 역학적 경계조건인 압력이 일정 하다는 조건을 만족 시키기 위해 Bernoulli 방정식에 나타나는 정수압을 고려하였다. 계산결과로부터 공동 발생으로 인해 수중익 주위의 파형이 많이 변화함을 알 수 있었다. 또한 지금까지의 공동현상 해석문제에서 무시되었던 정수압의 영향이 자유수면 아래에서 발생하는 초월공동현상에 중요한 역할을 하고 있음이 확인되었다. 즉 수중익의 몰수깊이가 작을 때는 중력의 영향으로 캐비티의 크기가 커지게 되나 깊이 잠김에 따라 감소되고 있으며 양력은 몰수깊이가 커짐에 따라 감소하는 것 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1487-1503
• /
• 2019

The methods and performance of a pin-level nuclear reactor core thermal-hydraulics (T/H) code ESCOT employing the drift-flux model are presented. This code aims at providing an accurate yet fast core thermal-hydraulics solution capability to high-fidelity multiphysics core analysis systems targeting massively parallel computing platforms. The four equation drift-flux model is adopted for two-phase calculations, and numerical solutions are obtained by applying the Finite Volume Method (FVM) and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE)-like algorithm in a staggered grid system. Constitutive models involving turbulent mixing, pressure drop, and vapor generation are employed to simulate key phenomena in subchannel-scale analyses. ESCOT is parallelized by a domain decomposition scheme that involves both radial and axial decomposition to enable highly parallelized execution. The ESCOT solutions are validated through the applications to various experiments which include CNEN $4{\times}4$, Weiss et al. two assemblies, PNNL $2{\times}6$, RPI $2{\times}2$ air-water, and PSBT covering single/two-phase and unheated/heated conditions. The parameters of interest for validation include various flow characteristics such as turbulent mixing, spacer grid pressure drop, cross-flow, reverse flow, buoyancy effect, void drift, and bubble generation. For all the validation tests, ESCOT shows good agreements with measured data in the extent comparable to those of other subchannel-scale codes: COBRA-TF, MATRA and/or CUPID. The execution performance is examined with a mini-sized whole core consisting of 89 fuel assemblies and for an OPR1000 core. It turns out that it is about 1.5 times faster than a subchannel code based on the two-fluid three field model and the axial domain decomposition scheme works as well as the radial one yielding a steady-state solution for the OPR1000 core within 30 s with 104 processors.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.55-63
• /
• 2022

A stranded ship means a ship which is stuck on a rock or a seabed, and cannot move by itself. The lightening plan is required to refloat the stranded ship. For this, we have to understand the forces and moments acting on the ship, which is composed of the gravity, buoyancy, and reaction force due to the touched area below the ship. This study defines those forces and moments, and proposed the calculation method to find the posture based on the static equilibrium. It is divided by two steps. In the first step, the magnitude and position of the reaction force are obtained based on the known information such as initial trim angle and draft of the ship. In the second step, the reaction force and the posture is calculated due to the three cases such as addition, reduction, and movement of the cargo. It is applied to three examples in order to calculate the reaction force, and the trim angle due to changes of the cargo. As a results, we successfully obtain the magnitudes and positions of forces acting on the stranded ship and to check the posture of the stranded ship.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.207-218
• /
• 2022

In submerged floating tunnels (SFTs), a next-generation maritime transportation infrastructure, the tunnel module floats in water due to buoyancy. For the effective and economical use of SFTs, connection with the ground is inevitable, but the stability of the shore connection is weak due to stress concentration caused by the displacement difference between the subsea bored tunnel and the SFT. The use of an elastic joint has been proposed as a solution to solve the stability problem, but it changes the dynamic characteristics of the SFT, such as natural frequency and mode shape. In this study, the finite element method (FEM) was used to simulate the elastic joints in shore connections, assuming that the ground is a hard rock without displacement. In addition, a small-scale model test was performed for FEM model validation. A parametric study was conducted on the resonance behavior such as the natural frequency change and velocity, stress, and reaction force distribution change of the SFT system by varying the joint stiffness under loading conditions of various frequencies and directions. The results indicated that the natural frequency of the SFT system increased as the stiffness of the elastic joint increased, and the risk of resonance was the highest in the low-frequency environment. Moreover, stress concentration was observed in both the SFT and the shore connection when resonance occurred in the vertical mode. The results of this study are expected to be utilized in the process of quantitative research such as designing elastic joints to prevent resonance in the future.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1172-1179
• /
• 2020

As a Lagrangian particle method, Moving Particle Semi-implicit (MPS) method has great capability to capture interface/surface. In recent years, the multiphase flow simulation using MPS method has become one of the important directions of its developments. In this study, some key methods for multiphase flow have been introduced. The interface tension model in multiphase flow is modified to maintain the smooth of the interface and suitable for the three-phase flow. The mass transfer at immiscible liquid interface entrained by single bubble which could occur in Molten Core-Concrete Interaction (MCCI) has been investigated using this particle method. With the increase of bubble size, the height of entrainment column also increases, but the time of film rupture is slightly different. With the increase of density ratio between the two liquids, the height of entrained column decreases significantly due to the decreasing buoyancy of the denser liquid in the lighter liquid. In addition, the larger the interface tension coefficient is, the more rapidly the entrained denser liquid falls. This study validates that the MPS method has shown great performance for multiphase flow simulation. Besides, the influence of physical parameters on the mass transfer at immiscible interface has also been investigated in this study.

• Ocean Systems Engineering
• /
• 제4권4호
• /
• pp.327-342
• /
• 2014

The tension leg platform (TLP) is one of the compliant structures which are generally used for deep water oil exploration. With respect to the horizontal degrees of freedom, it behaves like a floating structure moored by vertical tethers which are pretension due to the excess buoyancy of the platform, whereas with respect to the vertical degrees of freedom, it is stiff and resembles a fixed structure and is not allowed to float freely. In the current study, a numerical study for square TLP using modified Morison equation was carried out in the time domain with water particle kinematics using Airy's linear wave theory to investigate the effect of changing the tether tension force on the stiffness matrix of TLP's, the dynamic behavior of TLP's; and on the fatigue stresses in the cables. The effect was investigated for different parameters of the hydrodynamic forces such as wave periods, and wave heights. The numerical study takes into consideration the effect of coupling between various degrees of freedom. The stiffness of the TLP was derived from a combination of hydrostatic restoring forces and restoring forces due to cables. Nonlinear equation was solved using Newmark's beta integration method. Only uni-directional waves in the surge direction was considered in the analysis. It was found that for short wave periods (i.e., 10 sec.), the surge response consisted of small amplitude oscillations about a displaced position that is significantly dependent on tether tension force, wave height; whereas for longer wave periods, the surge response showed high amplitude oscillations that is significantly dependent on wave height, and that special attention should be given to tethers fatigue because of their high tensile static and dynamic stress.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.461-467
• /
• 2016

부유 이송식 해상풍력 기초를 목표 지점에 설치하기 위해서는 내부의 중공부에 해수를 주입하여 착저 시키게 되는데, 그 과정에서 중량 및 무게 중심과 부력중심이 변하게 되어 부유식 기초가 불안정해 질 수 있다. 부유 이송식 기초의 동적안정성 해석은 기초 외부의 수력학적 하중과 6-자유도 운동을 하게 되는 기초에 작용하는 파도와 조류 하중 및 설치 과정에서 기초 내부의 중공부로 투입되는 해수의 무게중심 이동까지 동시에 고려해야 하는 복잡한 문제이다. 따라서 본 연구에서는 3차원 비정상 CFD 기법과 다물체 동역학 기법을 연성 (coupling)한 정밀 해석기법을 적용하여 부유 이송식 기초 내부 물의 슬로싱 운동까지 고려한 동적안정성 해석을 수행하고 특성을 분석하였다.

• 에너지공학
• /
• 제23권3호
• /
• pp.27-35
• /
• 2014

본 연구에서는 기존에 알려진 수직 원형관내 혼합대류 유동영역지도에 대하여 원 문헌의 분석과 재구성을 통해 지도의 유효성 검토를 수행하였다. 지도를 구성하는 원 문헌을 수집하여 내용을 정리하였고 조사한 데이터와 대류열전달 상관식을 활용하여 독립적으로 지도를 재구성하고 기존의 지도와 비교하였다. 재구성한 지도에는 혼합대류 영역이 곡선이 아니라 직선으로 나타났으며 천이영역을 나타내는 것은 재현되지 않았다. 일부 데이터만 포함된 기존의 지도와 달리 재구성 지도에는 상당히 많은 양의 데이터가 포함됐다. 기존의 유동영역지도는 활용된 데이터가 선택적으로 사용되었고, 혼합대류와 천이영역을 나타내는 실선 대해 언급되지 않았으며 불확실도 분석을 통한 정보를 제공하지 않았기 때문에 신뢰할 수 없다고 판단된다. Metais와 Eckert의 연구 이후, 혼합대류에 관한 많은 연구가 수행되었으나 대류의 유동영역을 구분하는 방법으로 기존의 지도가 지금까지 활용되고 있다.