• 항공우주시스템공학회지
• /
• 제18권3호
• /
• pp.70-75
• /
• 2024

본 연구에서는 단열재 두께에 따른 소형발사체 공통격벽 추진제 탱크의 단열 성능을 분석하였다. 단일 파트로 이루어진 공통격벽 추진제 탱크는 탱크 연결부가 불필요하여 추진제 탱크의 경량화 설계가 가능하다. 그러나 산화제와 연료의 온도차로 인한 열전달에 의하여 추진제의 손실과 점화 지연 등의 문제가 발생할 수 있다. 따라서 산화제 탱크와 연료 탱크를 구분하는 공통격벽 구조의 단열 성능 확인이 필수적이다. 본 연구에서는 기화 질량(boil- off mass)을 이용한 단열 성능 분석을 위하여 단열재 두께가 50, 55, 60, 65, 70 mm인 추진제 탱크에 대해 과도 열전달 해석을 수행하였다. 이어서 추진제 탱크의 1단 비행시간 동안 발생하는 산화제의 기화 질량을 도출하였다. 그 결과, 단열재 두께가 증가할수록 기화 질량이 감소하여 단열 성능이 향상되었다.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.59-67
• /
• 1998

This study classifies distinctive peculiarities of cruise interior design which is different from that of structures on the land through the theoretical study on the cruise equipped with functions of hotel and ship. The distinguishing marks are : The first one of the main peculiarities is associated with the International agreement and the safety of passangers and the ship required by the specific regulation. The cruise interior design should be also selectively chosen. The third in comply with the peculiarity of the space plan the base of planning the cruise spaces are as follows : The course of bow and stern the pillar the center line of ship main vertical bulkhead watertight subdivision bulkhead and the deck. The last by special peculiarity of construction materials, materials and products applied for the cruise should meet the regulation of SOLAS and IMCO.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.666-669
• /
• 2011

이중펄스 로켓모타에 적용되는 격벽형 펄스분리장치의 파열판 형상을 변경하는 설계를 진행하였다. 펄스분리장치 설계 확정에 앞서 3가지 다른 형상의 파열판 평판시험을 진행하여 파열판 성능을 확인하였다. 평판시험후 시험결과를 분석하여 펄스분리장치 파열판의 8개의 원형 구멍형과 8개의 사다리꼴 구멍 형상을 적용하기로 결정하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.73-79
• /
• 2017

IACS enacted Harmonized CSR(CSR-H) to meet the IMO GBS applied from 1 July 2016. CSR-H is clearly complement and integrate than present CSR-BC & CSR-OT. One of the biggest issue in new rule is structural analysis. In CSR-H, structural analysis must carried out entire each cargo area including the aft bulkhead of the aftermost cargo hold and the collision bulkhead. Accordingly, new load and boundary conditions are present, an additional structural reinforcement is required by the structural analysis result for each cargo hold. In this study, we applied CSR-H to existing 158K DWT CLASS CRUDE OIL TANKER in order to compare and analyze the hull changes. It is useful for the application of the CSR-H to the similar vessel and helpful in finding the optimized structural design.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.135-141
• /
• 2007

CSR(Common Structure Rules) enter into force on $1^{st}$ April 2006. Generally for double hull tankers of less than 150m in length, the Rules of the individual Classification Society are to be applied. Where high tensile stresses act through an intermediate plate, increased fillet welds or penetration welds are to be used longitudinal/transverse bulkhead primary support member end connections to the double bottom. If workers have begun to make used of established procedures between corrugated BHD and lower stool joint, first to welding on groove of face and then it has to gouging to blow on groove of root. So amount of man-hour increased, productivity secreased.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.47-50
• /
• 2011

E/R bulkhead is watertight bulkhead between engine room and cargo hold. So, it must have sufficient strength about cargo load of aft hold. Especially, partial stringer deck between tank top and $2^{nd}$ deck of engine room must have sufficient strength because it has function of primary supporting member. Generally, cargo hold structure is verified through the direct calculation as finite element analysis of cargo hold, but engine room structure doesn't perform it. Therefore, we have performed finite element analysis of engine room stringer deck which considered cargo hold load. And then, it will be able to apply similar ship design.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.22-27
• /
• 2004

An orthotropic steel deck system is widely adapted form for a long-span bridge. It has many advantages, such as the big reduction of dead weight, the simplicity for erection, and the reduction of the construction period. However, an orthotropic steel deck system requires a lot of welding work, which may result in defects and deformation of connection. Therefore, the research for the general behavior and fatigue strength of the several details in orthotropic steel deck bridge is necessary. The fatigue failure with distortion results from secondary stress by out-of-plane deformation; these kinds of cracks are very difficult to measure, and can not be precisely calculated through finite element analysis. This stress concentration phenomenon generates the fatigue failure around the lower scallop of the transverse rib. This paper presents improved details of the intersection between the longitudinal rib and the transverse rib of an orthotropic steel deck bridge by the third dimensional hit size test, and the finite element method, which can minimize local stress through parametric study.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.792-802
• /
• 2010

A plastic analysis method is commonly used in ship and offshore structural system to utilize the ultimate strength. In this paper, the basic principle of plastic analysis method is applied to ship grillages such as transverse oil-tight bulkheads. The main emphasis is placed on the optimum arrangement of grillage system to give minimum weight. Additional parametric study is carried out to find the effect of various arrangement of grillage system. The above methods are applied to oil-tight bulkhead design, and results are compared with the existing one.

• 대한조선학회지
• /
• 제53권4호
• /
• pp.42-46
• /
• 2016

• 대한조선학회논문집
• /
• 제35권2호
• /
• pp.63-73
• /
• 1998

최근 산적화물선의 빈번한 침몰사고 발생과 함께 산적화물선의 구조안전성 확보문제가 관심의 대상이 되고 있으며, IMO, 각국 선급협회를 중심으로 구조강도 강화작업이 진행되고 있다. 특히 IMO에서는 산적화물선 침몰사고의 주요 원인중의 하나로 지적되어 온 침수시 파형 횡격벽의 붕괴문제를 방지하기 위해 신조선박뿐만 아니라 기존선박에 대해서도 파형 횡격벽을 보강하도록 하는 규정의 제정을 서두르고 있다. 이 문제와 관련하여 보다 근본적으로는 파형 횡격벽의 최종붕괴 강도 평가방법이 확립되어 있지 않은 문제점이 있다. 본 연구에서는 탄소성 대변형 유한요소 해석기법을 적용하여 파형 횡격벽의 붕괴강도를 계산하기 위한 전용 프로그램을 개발하였으며, 구조모형실험 결과와의 비교를 통하여 개발한 프로그램의 정도와 유용성을 검증하였다.