• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.501-508
• /
• 2012

This study was carried out to compare species diversity of soil bacteria from Baekdudaegan mountain forests (Bonghwa-gun, Mungyeong-si and Sangju-si) in Gyeongsangbuk-do and to analyze the effects of soil environments on diversity and population of soil bacteria. Soil bacteria were isolated from soil samples by streak plate method, and identified by DNA extaction and 16S rDNA sequence analyses. The population of soil bacteria from the soil samples of Bonghwa-gun was the highest with $5.1{\times}10^5cfu/g$, and followed by those from Mungyeong-si and Sangju-si with $1.9{\times}10^5cfu/g$ and $1.1{\times}10^5cfu/g$, respectively. The population of soil bacteria from surface layer soil was the highest, and then gradually decreased according to soil depth. The increase in population of soil bacteria from soil samples of different sites was correlated with the increase of the altitude of soil sampling site, depth of A horizon, liquid phase among three phases of soil, water content and bulk density of soil. Two hundreds and sixty eight bacterial colonies from Bonghwa-gun were classified into 10 species, 8 genera. One hundred and thirty four bacterial colonies from Mungyeong-si were classified into 15 species, 9 genera. Forty four bacterial colonies from Sangju-si were classified into 5 species, 2 genera. The dominant species (occupancy rate) from Bonghwa-gun and Mungyeong-si were Bacillus weihenstephanensis (36% and 40%, respectively), and Sangju-si was Bacillus cereus (39%). The relationships between soil environment and community structure of soil bacteria were analyzed statistically by using ecological indices. The diversity, evenness and dominance indices of soil bacteria were 6.30, 2.04 and 0.59 in Bonghwa-gun, 9.09, 2.94 and 0.51 in Mungyeong-si, and 4.55, 2.34 and 0.71 in Sangju-si, respectively. The diversity and evenness indices were increased by the increase of water content, drainage condition and gravel content of soil, while the dominance index was decreased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1242-1248
• /
• 2013

This study was performed to determine the effects of pretreatment (NT: non-treatment, BTS: boiling treatment with 3% sodium chloride, DTG: dipping treatment in glycerol) and drying methods (sun drying, hot air drying, and cold air drying) on the physicochemical properties and antioxidant activities of dried jujube (Zizyphus jujuba Mill.) fruits. Our results show that moisture content is lower (P<0.05) with DTG, and that moisture content is lower with hot air drying compared to other drying methods. The bulk density was highest with BTS. The soluble solids content was highest with DTG. Additionally, the soluble solids content were highest in the following order: hot air drying> cold air drying> sun drying. The titratable acidity of hot air drying was highest of all the drying methods. The titratable acidity was higher with NT and DTG, and the brix and acid ratio of sun drying was higher than other drying methods. Among the drying methods, BTS showed the best browning-retarding effect, whereas boiling treatment affected quality and color. The total polyphenol content from hot air drying and NT or DTG treatment was relatively higher than the content from BTS. The flavonoid content was highest with BTS, and all dried jujube showed relatively high antioxidant activities. The sensory evaluation results indicated that the organoleptic scores for overall preference were higher in the NT and DTG treatment groups. These results suggest that pretreatment and drying methods affect the quality of dried jujube fruit, and show that glycerol treatment with hot air drying can be applied to the production of high quality dried jujube.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.129-133
• /
• 2017

Oyster mushroom is a type of mushroom that is commonly cultivated and consumed in Korea. P. ostreatus 'Suhan' is a preferred cultivar for many mushroom farmers because it has a dark pileus and thick stipe. However, as it is very sensitive to environmental conditions, farmers consistently demand an alternative cultivar. To develop a new cultivar, the parental strains KMCC01680 ('Suhan') and KMCC00478 ('Gosol') were selected from various collected P. ostreatus strains by cultivating genetic resources. P. ostreatus 'Heuksol' was developed by the method of Mon-Mon crossing between monokaryotic strains derived from 'Suhan' and 'Gosol'. Thirty strains of 174 crossed strains were initially selected by cultivation experiments. After bulk cultivation tests, 'Heuksol' was selected. The nuclear DNA profile of 'Heuksol' was similar to those of the parental strains, 'Suhan' and 'Gosol', when RAPD (random amplified polymorphic DNA) primers and UPF (Universal PCR Fingerprinting) 2, 3, and 4 were used. The optimum temperature for mycelial growth was $30^{\circ}C$ for 'Heuksol', but medium-high temperatures were also appropriate, especially $13-20^{\circ}C$. The fruiting body production per bottle (1,100 mL) was approximately 140.8 g. When compared to the control strain 'Suhan', the thickness of the stipe of 'Heuksol' was greater than that of 'Suhan' (13.5 mm vs 9.4 mm). The pileus diameter of 'Heuksol' was similar to that of 'Suhan' and the pileus thickness of 'Heuksol' and 'Suhan' was 19.7 mm and 21.8 mm, respectively. 'Heuksol' had more a productive stipe number than 'Suhan' and the pileus of 'Heuksol' was dark gray, even at high temperatures. Therefore, it was suggested that this new cultivar, 'Heuksol', could provide an alternative to 'Suhan' and contribute to the profit of oyster mushroom farms.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.77-101
• /
• 2009

Organic farming in Korea has mainly focused on producing vegetables in plastic film house and cereals in paddy field. For high productivity of vegetables and cereals, most Korean farmers have not applied crop rotation in the cropping system. Thus, this study was carried out to evaluate the effects of crop rotation on the yield of red pepper and green onion, the changes in soil fertility and the potential as green manure of rye and hairy vetch. Rye and hairy vetch were cultivated for winter season every year, and directly incorporated into the soil. The yield of red pepper fruits in organic farming using crop rotation (OFCR) decreased 23 to 36% compared with conventional farming system (CFS). Whereas, green onion showed the increased yield of about 13%. In OFCR, total carbon content of soil was higher, however available phosphate content lower than conventional farming. As a result of measuring the bulk density of soil, OFCR and CFS were 1.26 to $1.35Mg/m^3$ and 1.37 to $1.42Mg/m^3$, respectively. Carbon and nitrogen contents of microbial biomass in OFCR were obviously higher compared with the CFS. In the plot cultivated rye for winter season, the weed germination was strongly reduced (about 52 %). Balance of macro nutrient elements, nitrogen and phosphate, in the application of rye and hairy vetch had a minus value. For potassium, the output value was higher than the input one, therefore organic farming under red pepper-rye or hairy vetch systems requires applying additional potassium input. Also, we selected two hairy vetch varieties of cv. Hungvillosa and Ostsaat which can be adapt at Korea climate. In order to estimate a yield of green manures, the weight of shoot and root was measured. The ratio of shoot and root between rye and hairy vetch showed 0.88 and 1.91, respectively. The potential levels of nitrogen, phosphate and potassium which could be supplied from rye were 7.7, 7.8 and 21.9 kg/10a and from hairy vetch were 17.0, 8.6 and 22.9 kg/10a, respectively. So we recommend that cultivating hairy vetch, as a nutrient supplier, and rye, as an amendment to enhance the soil physical property, for winter season be practical method in Korea organic farming system.

• Korean Journal of Weed Science
• /
• v.31 no.3
• /
• pp.294-307
• /
• 2011

This experiment carried out to confirm characteristics of macrogranule (GG) for herbicidal efficacy by using remote-controlled aerial application (RCAA) to control annual and perennial weeds in rice paddy field, application methods, and application times of formulation types. Particle of 500 g GG having average diameter of 2.5~3 mm was over 85 percent, the bulk density of the particle was $0.2\sim0.4g\;mL^{-1}$ and the particle was water floating granule. Active ingredients and external form of halosulfuronmethyl+mefenacet GG remained stable under condition of storage stability test. The disintegration time of the GG was faster as the water temperature was increased. But disintegration time was not affected by pH on the water conditions. By using hand, spoon and power applicator, drift distances of GG were 4~5m, 7 m and 10~12 m, respectively. GG showed good herbicidal efficacy and plant safety in all of the application methods such as, using hand, spoon, power applicator and RCAA. Application times of GG, GR, SC and TB by hand in $4,000m^2$ were 38 min. 4 sec, 42 min. 20 sec, 38 min. 10 sec and 21 min. 4 sec, respectively, but application time of GG by using RCAA was 1 min 32 sec. According to appearance and characteristics of formulation types, suspension concentrate (SC) and GG were possible formulation types for RCAA.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3263-3291
• /
• 1974

Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.576-584
• /
• 1988

Neutral detergent fiber(NDF) were extracted from the Nampung, Milyang #23, Whasung and Jinhung varieties of rice by neutral detergent fiber method. To determine the properties of NDF three factors were measured : water-binding capacity(WBC), Fe-binding capacity and sodium taurocholate binding with NDF. The average WBC of NDF was $5.60{\pm}0.87gH_2O/g$ NDF, and the average Fe-binding capacity ranged from 24.63% at pH 5.0 to 19.6% at pH 6.0 and 48.98% at pH 7.0. Binding of sodium taurocholate with NDF was determined in vitro using C-14 labeled sodium taurocholate at 100M sodium taurocholate concentrations. NDF binding of Jinhung was 27.87 while Nampung, Milyang #23 and Whasung measured 32% each. When sodium taurocholate concentrations were raised from $40{\mu}M\;to\;240{\mu}M$ the tendency of binding increased as the concentrations increased, but not linearly.

• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.452-459
• /
• 2006

Competition will usually develop between the opposing walls as the restorative resin shrinks during polymerization. Magnitude of this phenomenon may be depended upon cavity configuration and volume. The purpose of this sturdy was to evaluate the effect of cavity configuration and volume on microleakage of composite resin restoration that has margins on the enamel site only. The labial enamel of forty bovine teeth was ground using a model trimmer to expose a flat enamel surface. Four groups with cylindrical cavities were defined, according to volume and configuration factor(Depth x Diameter / C-factor) - Group I : 1.5 mm ${\times}$ 2.0 mm / 4.0, Group II : 1.5 mm ${\times}$ 6.0 mm / 2.0, Group III : 2.Omm ${\times}$ 1.72 mm / 5.62, Group IV : 2.0 mm ${\times}$ 5.23 mm / 2.54. After treating with fifth-generation one-bottle adhesive - BC Plus$^{TM}$ (Vericom, AnYang, Korea), cavities were bulk flted with microhybrid composite resin - Denfill$^{TM}$ (Vericom). Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Specimens were thermocycled 500 times between 5$^{\circ}$C and 55$^{\circ}$C for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}$A) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. The results were as follows: 1. Small cavity volume showed lower microleakage score than large one, however, there was no statistically significant difference. 2. There was no relationship between cavity configuration and microleakage. Factors of cavity configuration and volume did not affect on microleakage of resin restorations with enamel margins only.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.493-506
• /
• 1993

For maintenance of an ailing or failed implant it is essential to treat the implant fixture surface so as to remove bacterial endotoxin and make a surface tolerated by surrounding soft and hard tissue. Thus in this study the method that makes the smoothest surface treated with a high speed diamond bur, a low speed diamond bur, a stone, a rubber point or Jetpolisher was studied. With the profilomenter a mean value of $R_{max}$ was measured. The hight speed diamond, the rubber point and the Jetpolisher showed a mean $R_{max}\;7.77{\mu}m$. The low speed diamond bur, the rubber, point and the Jetolisher made a mean value of $R_{max}\;8.44{\mu}m$. The stone, the rubber point and the Jetolisher showed the smoothest surfaces with a mean value of $R_{max}\;6.24{\mu}m$. TPS (titanium plasma sprayed) areas showed a mean vlaue of $R_{max}\;24.42{\mu}m$, and the smooth surfaced titanium disc manufactured by the company (IMZ, Germany) shows a mean value of $R_{max}\;3.00{\mu}m$. Under the SEM examination the disc treated with a high speed diamond bur, a rubber point and a Jetpolisher showed partially remaining TPS particles, but the height of these particles were reduced remarkably compared with those of the original TPS. The disc treated with a low speed diamond bur, a rubber point and a Jetpolisher showed a rough topography with remaining TPS on the entire surface. A stone, a rubber point and a Jetpolisher removed almost TPS and the bulk titanium metal was exposed and some scratches were made by the stone. All treated discs were revealed as rougher than the smooth surface disc manufactured by the company. An untreated TPS disc shows a very irregular surface and a $40{\mu}m$ height of the plasma sprayed areas.