• 한국초전도ㆍ저온공학회논문지
• /
• 제26권1호
• /
• pp.1-4
• /
• 2024

This study explores the use of a bulk type high-temperature superconductors (HTS) as trapped field magnets in synchronous motors. A HTS bulk is examined for its ability to generate powerful magnetic fields over a permanent magnet and to eliminate the need for a direct power supply connection compared to a tape form of HTS. A 150 kW interior-mounted bulk-type superconducting synchronous motor is designed and analyzed. The A-H formulation is used to numerical analysis. The results show superior electrical performance and weight reduction when comparing the designed model with the conventional permanent magnet synchronous motor of the same topology. This study presents HTS bulk synchronous motor's overall design process and highlights its potential in achieving relatively high power density than conventional permanent magnet synchronous motor.

• Journal of Information Display
• /
• 제10권4호
• /
• pp.143-148
• /
• 2009

The theoretical current density equations for organic semiconductors was derived according to the internal carrier emission equation based on the diffusion model at the Schottky barrier contact and the mobility equation based on the field dependence model, the so-called "Poole-Frenkel mobility model." The electric field becomes constant because of the absence of a space charge effect in the case of a higher injection barrier height and a lower sample thickness, but there is distribution in the electric field because of the space charge effect in the case of a lower injection barrier height and a higher sample thickness. The transition between the injection- and bulk-limited currents was presented according to the Schottky barrier height and the sample thickness change.

• 한국식품과학회지
• /
• 제26권4호
• /
• pp.348-354
• /
• 1994

반응 조건을 달리하여 게껍질에서 chitin을 추출하고 이를 탈아세틸화하여 chitosan을 제조하였으며, 이들의 물리, 화학적 특성과 소화관내 기능성을 in vitro법으로 실시하였다. 이들 chitin질의 bulk density는 $127{\sim}208\;mg/ml$, 점도는 0.1% chitin의 경우 $80{\sim}581\;cP$, 0.5%, chitosan은 $80{\sim}3,670\;cP$로 다양한 수치를 나타냈으며, chitosan의 탈아세틸화도는 $81{\sim}93%$로 비교적 높았다. Chitosan 제조시의 알칼리 농도와 반응 온도가 일정할 때 반응 시간이 경과할수록 탈아세틸화도는 증가하였고, 점도는 감소하는 경향을 보였다. Chitin질의 보수력은 온도 상승에 따라 약간 상승하였고, $37^{\circ}C$에서 chitosan D가 가장 높았으며, bulk density가 낮을수록 높은 보수력을 나타냈다. Glucose 흡수 억제 효과는 bulk density가 낮고 보수력이 큰 chitin길이 더 컸고 chitosan D가 가장 높은 38%를 나타냈다. Chitin질의 bile acid 흡수 억제 효과는 투석 1시간 후에 $15{\sim}34%$를 나타냈고, pectin은 39%, cellulose는 9%를 나타냈으며 chitosan D는 3% 농도에서 34%의 가장 높은 억제 효과를 나타냈다.

• 농업과학연구
• /
• 제5권2호
• /
• pp.127-135
• /
• 1978

경운장치(耕耘裝置)의 재량(改良)과 새로운 경운장치(耕耘裝置)의 설계(設計)를 위(爲)한 실험(實驗)을 실내(室內)에서 실시(實施)하기 위하여 Soil bin과 자연토양(自然土壤)과 유사(類似)한 39.35%의 bentonite, 48.10의 모래 및 12.55%의 SAE 10W oil을 사용한 인공토양(人工土壤)을 제조(製造)하였으며 경운실험(耕耘實驗)을 위(爲)한 인공토양(人工土壤)의 물리적(物理的)인 특성(特性)을 구명(究明)하기 위해 전압회수(轉壓回數), 전압속도등(轉壓速度等)을 변화(變化)시켜 가면서 인공토양(人工土壤)의 절대경도(絶對硬度), 밀도(密度), 인공토양(人工土壤)과 철판(鐵板) 및 고무판(板) 및 고무판(板)의 동마찰계수(動摩擦係數)를 측정(測定)하였으며 인공토양(人工土壤)의 밀도변화(密度變化)에 따른 점착력(粘着力)과 내부마찰각(內部摩擦角)의 변화(變化)를 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 전압회수(轉壓回數)가 증가(增加)할수록 밀도(密度)는 증가(增加)하였으며 그 관계식(關係式)은 다음과 같다. $y=1.073200+0.070780x-0.002263x^2$ 여기서, y : 밀도(密度)($g/cm^3$) x : 전압회수(轉壓回數) 전압속도(轉壓速度) 4.5~10.4 cm/sec의 범위(範圍)에서 전압속도(轉壓速度)는 밀도(密度)에 큰 영향(影響)을 주지 않았다. 2. 토양절대경도(土壤絶對硬度)는 전압속도(轉壓速度) 4.5~10.4cm/sec의 변화(變化)에 거의 영향(影響)을 받지 않았으며 토양절대경도(土壤絶對硬度)(y)는 전압회수(轉壓回數)(x)의 증가(增加)에 대(對)하여 곡선적(曲線的)으로 증가(增加)하였는데 그들 관계식(關係式)은 다음과 같다. $y=37.74{\frac{(0.64 +0.17x-0.0054x^2}{(3.36-0.17x-0.0054x^2)^3}}$ 3. 밀도(密度)(Bulk density : y($g/cm^3$))와 토양절대경도(土壤絶對硬度)(absolute soil hardness : x($kg/cm^3$))의 관계식(關係式)은 다음과 같다. $y=37.74{\frac{2.46x-2.02}{(6.02-2.46x)^3}$ 4. 밀도(密度)의 변화(變化)는 점착력(粘着力)과 내부마찰각(內部摩擦角)에 영향(影響)을 주는데 밀도(密度)가 1.60~1.75에서 함수비(含水比) 29.5%인 자연토양(自然土壤)의 사질(砂質)loam과 유사(類似)한 값을 나타내었다. 5. 동마찰계수(動摩擦係數)는 철판(鐵板)의 경우 0.3~0.4, 고무판(板)의 경우 0.64~0.72로 나타났으며 자연토양(自然土壤)에서의 값과 유사(類似)하다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.19-22
• /
• 2014

The effects of Mg content on the pore formation, density and critical properties were investigated in in-situ reacted $MgB_2$ superconductors. The $Mg_{1+x}B_2$, (x=-0.2, 0.0, 0.05, 0.3, 1.0) bulk samples with different Mg contents were heat-treated at $900^{\circ}C$ for 1 h in an Ar atmosphere. The dimensional changes of a pellet's mass and volume after heat-treatment were measured. After heat-treatment process, the sample mass was decreased by Mg evaporation, but the sample volume was expanded by pore formation at the Mg site; therefore, the apparent density was decreased. Spherical pores the same as Mg particles were developed after heat-treatment in all samples, and the pore density was increased with increasing Mg content. As the x of Mg content was increased to 1.0, the apparent density of $Mg_{1+x}B_2$ samples was decreased due to a relatively larger reduction in a mass change. The critical current density of Mg excessive sample of x=0.05 showed the highest values over the applied magnetic fields because the excessive Mg may compensate Mg loss and enhance grain connectivity.

• Journal of Biosystems Engineering
• /
• 제33권2호
• /
• pp.101-105
• /
• 2008

Some physical properties of rapeseed such as geometric properties (linear dimensions, sphericity, seed volume, surface area) and gravimetric properties (the mass of one thousand seeds, bulk density) were analyzed at five levels of moisture content of 10.03, 14.91, 20.07, 25.06 and 30.12% (w.b.). The physical properties of rapeseed were evaluated as a function of seed moisture content. In the moisture range, when the moisture content increase, sphericity decreased from 0.946 to 0.927, and geometric mean diameter, seed volume and surface area increased from 2.17 to 2.31 mm, 5.58 to $6.88 \;mm^3$ and 14.76 to $16.77\;mm^2$ respectively. Mass of one thousand seeds increased from 5.04 to 6.46 g. Bulk density decreased from 579.3 to $549.2\;kg/m^3$ due to swelling of the seed.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.26-33
• /
• 1990

To study the wood quality factors of Populus nigra $\times$ maxmowiczii known a rapidly growing species, the variations of green moisture contents, bulk density, wood fibre dimensions, microfibril angles, and number of leaf knot in stem wood were investigated. The heartwood contained a higher moisture content than the corresponding sapwood. Bulk density in radial patterns variations decrease outward from the pith, then increase toward the bark. The wood-fiber length and diameters had somewhat smaller values than on Populus alba $\times$ glandulosa or Populus euramericana. The microfibril angles decreased rapidly toward the outside, and their mean values were about 16 degree. The grain angles run nearly parallel to the cell axies. Number of leaf knot showed a fluctural change above ground level to a point near the base of the crown and then increased rapidly to the top of tree and average number of leaf knot varied exclusively from tree to tree.

• 한국염색가공학회지
• /
• 제20권3호
• /
• pp.1-7
• /
• 2008

Three kinds of 135D/108F ITY were produced from raw yam 85D/72F + SDY 50D/36F with. interlacing pressure $1.5kg/cm^2$, $2.5kg/cm^2$, $3.5kg/cm^2$ respectively. 72 kinds of sized yams were manufactured from three ITYs by altering sizing speed, sizing temperature and sizing tension. The mechanical characteristics of 72 kinds of plain fabrics which were woven using the sized yam as a warp were analyzed after scouring. The initial modulus of scoured fabric responded sensitively to the sizing speed in high tension. The WT of scoured fabric recorded the. highest1n the conditions of sizing tension 30g, and air pressure $2.5kg/cm^2$ in interlacing treatment. When sizing temperature was high, the WT value appeared low, but when sizing speed was high, the WT value was much affected by air pressure in interlacing raw yam. The MIU value of fabric according to sizing tension variations increased up to sizing tension 40g, but decreased above it. The bulk density decreased up to sizing tension 30-40g, but increased above it. In addition, the bulk density decreased as sizing temperature increased.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.331-337
• /
• 2015

$LaBO_3$ (B = Cr, Mn, Fe, Co, and Ni) perovskites, the most common perovskite-type mixed ionic-electronic conductors (MIECs), are promising candidates for intermediate-temperature solid oxide fuel cell (IT-SOFC) cathodes. The catalytic activity on MIEC-based cathodes is closely related to the bulk ionic conductivity. Doping B-site cations with other metals may be one way to enhance the ionic conductivity, which would also be sensitively influenced by the chemical composition of the dopants. Here, using density functional theory (DFT) calculations, we quantitatively assess the activation energies of bulk oxide ion diffusion in $LaBO_3$ perovskites with a wide range of combinations of B-site cations by calculating the oxygen vacancy formation and migration energies. Our results show that bulk oxide ion diffusion dominantly depends on oxygen vacancy formation energy rather than on the migration energy. As a result, we suggest that the late transition metal-based perovskites have relatively low oxygen vacancy formation energies, and thereby exhibit low activation energy barriers. Our results will provide useful insight into the design of new cathode materials with better performance.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.8-14
• /
• 2016

A bulk-type Ta material is fabricated using the kinetic spray process and its microstructure and physical properties are investigated. Ta powder with an angular size in the range $9-37{\mu}m$ (purity 99.95%) is sprayed on a Cu plate to form a coating layer. As a result, ~7 mm-sized bulk-type high-density material capable of being used as a sputter material is fabricated. In order to assess the physical properties of the thick coating layer at different locations, the coating material is observed at three different locations (surface, center, and interface). Furthermore, a vacuum heat treatment is applied to the coating material to reduce the variation of physical properties at different locations of the coating material and improve the density. OM, Vickers hardness test, SEM, XRD, and EBSD are implemented for analyzing the microstructure and physical properties. The fabricated Ta coating material produces porosity of 0.11~0.12%, hardness of 311~327 Hv, and minor variations at different locations. In addition, a decrease in the porosity and hardness is observed at different locations upon heat treatment.