• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.305-313
• /
• 2023

With an increasing interest in the commercialization of research results in the present societal climate, especially in the construction industry, preliminary product analysis plays a critical role when introducing a new product to the market. It significantly influences the product's success or failure. In this context, this study aims to investigate the utility of Importance-Performance Analysis (IPA) as a management strategy tool for preliminary analysis in the commercialization of new architectural technologies. The study specifically assesses a smart ball product engineered for pipeline inspection. The evaluation is carried out based on product quality, convenience, and usability categories. Seventeen factors are recognized as sub-items, and a survey is conducted among relevant experts and consumer groups. From the survey, four key items are chosen: "Keep up the good work," "Concentrate here," "Low priority," and "Possible overkill." Suitable strategic measures are derived for each item. By conducting a correlation analysis between product importance and performance, this study offers a method to establish priority directions for future development. This analysis assists in identifying areas that necessitate improvement or additional focus to increase the product's commercial potential. On the whole, this study contributes to understanding and applying Importance-Performance Analysis as a valuable tool in the preliminary analysis and commercialization of novel technologies in the field of architecture.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.655-663
• /
• 2016

Increasing green house gas and it consequent climate change problems are discussed as a global issue. Accordingly, future local green house gas emission will increase up to 40% of the entire local green house gas emission and therefore, efforts to reduce the emission in construction industry is urgently required. Therefore, in this study, heating energy demand was analyzed by using the EnergyPlus simulation according to wood material finishes configuration. EnergyPlus has the entry for a variety of buildings and heating, ventilation, air conditioning (HAVC) system components, in particular buildings, air conditioning systems, and performs simultaneous integrated calculated through the feedback between the heat source unit, a verification program according to the ASHRAE Standard 140-2007 to be. The climate data for the simulation we used the data IWEC in Incheon and Gwangju provided by EnergyPlus. The analysis of simulation model was farm and fishing house standard design drawings: 2012, presented at the Korea Rural Community Corporation. The results of simulation of central region and southern region were effected by wood products of simulation model into the interior finish, exterior finish, windows, wooden structure. Also, it was confirmed that the reduced heating energy demand.

• Spatial Information Research
• /
• v.12 no.3
• /
• pp.285-298
• /
• 2004

Transportation digital map has built based on NGIS (national geography institute's 1 :5000 digital database) which derived from the aerial photo materials. Transportation digital map is a part of National Transportation Database Building Project carried out by the Korea Transport Institute and Ministry of Construction and Transportation. Transportation digital map for the purpose of transportation plan and investment has been updated and corrected the NGIS database especially for road network. Transportation digital map database is essential basic data fully applied for transportation policy and planning. The database must be reliable and objective to be applied for national transportation policy decision and transportation analysis. In addition, it needs accuracy and currentness to reflect the road network for the survey year. To satisfy the purpose of the database, following steps are necessary first, data Production and building has to be done by guideline of survey and database building. Secondly, geometric and logical errors which can occur during the survey and database building should be carefully detected. Thirdly, sectional guideline for database examination and procedure needs to be set up systematically and coherently This study is about examination guidelines for section and procedure on nodes and links which are essential object in transportation digital map database. According to the type of error, consistent and systematic error examination can lead to quality guarantee for objective and reliable database.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.139-151
• /
• 2018

The National Base Map construction consists of the regular correction work of dividing the whole country into two regions and carrying out the modification Plotting by aerial photographs every two years as well as the real time updating work of correcting the major change feature within two weeks by the field survey and the As-Built Drawing. In the case of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) used for real time updating work of the National base map, the coordinate transformation error is included in the positional error when applied to the National Base Map based on the World Geodetic Reference System as the coordinate system based on the Regional Geodetic Reference System. In addition, National Base Map is registered based on the outline(eaves line) of the building in the Digital Topographic Map, and the Cadastral and Architecture are registered based on the building center line. Therefore, the Building Object management standard is inconsistent. In order to investigate the improvement method, the network RTK survey was conducted directly on a location of the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS) and the problems were analyzed by comparing with the plane plotting position reference in National Base Map. In the case of the general structure with the difference on the Building center line and the eaves line, beside the location information was different also the difference in the ratio of the building object was different between Building center line and the eave. In conclusion, it is necessary to provide the Base data of the double layer of the Building center line and the outline of the building(eaves line) in order to utilize the Building Layout Drawing of Korea Real estate Administration intelligence System(KRAS). In addition, it is necessary to study an organic map update process that can acquire the up-to-dateness and the accuracy at the same time.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.51-59
• /
• 2019

This study aims to examine the design and construction methods of movable Pavilions. Through the literature analysis, the setting up of the construction background, location and direction, size and composition, materials and construction methods were analyzed. The results are as follows; First, the movable pavilion is designed to enjoy a wide range of views. It was a creation that reflected the way in which the ideal life was pursued based on the experience of enjoying scenery rather than owning one's own house and running a pavilion. Second, the formation of movable pavilion was intended to enjoy the scenery by season without restrictions on time and place. It can also relieve the hassle of having to move tools to enjoy the wind every time. Third, the movable pavilion faces to a place with good scenery and determines its position and direction. Most of them were built on a small scale and divided the space for viewing the scenery, playing GO(Baduk), writing poems, and playing musical instruments. Also, wood was used mainly. To reduce the load, roofs and walls were constructed with light materials such as bamboo, straw, thick sheet of oil, and cotton cloth. The construction method was mainly used by the method of fastening for easy coupling and dismantling. When a building was constructed on the upper part of a ship or cart, the wooden structure of a regular pavilion was constructed. Fourth, when comparing the design and construction characteristics of ordinary pavilion and movable pavilion, the movable pavilion is easy to see for contrast purposes, so there is no limit to setting the location and direction. Instead, more stringent systems and techniques were called for, because as mobility forces should be considered, structurally measures to withstand loads, and they should satisfy their function and form as pavilion.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.120-137
• /
• 2021

There were five palaces built during the Joseon Period. Gyeongbokgung Palace was the first one, founded in the 4th year of King Taejo (1395), and depending on the historical interpretation, Changdeokgung Palace, Changgyeonggung Palace, Gyeongungung Palace (Deoksugung), and Gyeongdeokgung Palace (Gyeonghuigung) were also built. The palaces represent the best architecture of the time. In addition, the palaces of the Joseon period have been rebuilt several times, so they contain the architectural history of the Joseon period over the last 500 years. In this paper, all the excavations of five palaces in the Joseon Period were surveyed, and the foundations of the buildings were analyzed. In particular, the aim of this paper is to investigate Jeoksim (foundations of buildings under cornerstone) to understand the characteristics of each palace by period. Accordingly, the changes of the construction techniques of the foundations of the palaces were studied. There are a total of 23 types of Jeoksim. All five palaces have a certain type (I~V) of construction technique, thus it was confirmed that there was a certain pattern in the method of constructing the foundations of palace buildings in the Joseon Dynasty. In addition, Jeoksim was mainly built by certain materials and construction methods (I-1) during the 14th to the 17th century, but new types of Jeoksim were built in the palaces starting from the 18th century, during the reign of King Jeongjo. In the 19th century, when King Gojong sat on the throne, the Jeoksim was built in various shapes, materials, and in 22 types of construction methods. Up to now, research on the remains of palaces were mainly conducted on the Gyeongbokgung Palace, so it was not possible to confirm the foundations of 17th-18th century buildings, where reconstruction had stopped after the Imjin War in 1592. However, through this study, it was possible to classify the transition periodsstheir features periods of palace building foundation construction from the 14th to the 20th century by comparing the remains of five palace building sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.269-275
• /
• 2019

As the national industry is developing gradually due to the expansion of the economic scale, the construction of large and super high-rise structures for building social infrastructure has been increasing, and studies have been conducted actively to transmit the large loads at the upper portion to the lower bedrock. In this study, the PHC was extended to an ultra-high strength PHC, which increased the concrete compressive strength of the PHC from the conventional 80 MPa to 110 MPa, and the PHC, which extended the tip of the pile. After construction with the driving method and injected pile method, the tendency of the bearing capacity was tested through a load test. Measurements of the bearing capacity of the extended PHC using the pile driving method revealed the main surface friction force to be smaller than that of the general PHC, and the stet-up effect was also insignificant. On the other hand, the effect of the friction force on the ground surface when the injected pile method was applied is expected to increase the bearing capacity when the gap between the main surface and the ground is wide and the cement paste is filled tightly. In addition, the ultrahigh strength PHC showed higher bearing capacity than the conventional PHC, and the permissible pile stress was less than 60%. Therefore, it is possible to reduce the number of piles and reduce the construction cost and effect of shortening the length of the pile by designing the tip of the pile on the ground with the intensity of soft rock as a method for utilizing the increased strength of the ultra-high strength PHC.

• Journal of KIBIM
• /
• v.1 no.2
• /
• pp.1-5
• /
• 2011

A recent introduction of BIM has raised a necessity for BIM guidelines and guidelines following the decision about the BIM introduction are being present both home and abroad. This study hereby intended to develop BIM guidelines to the architectural field, for which the role and development directives of BIM guidelines were set up based on BIM concepts and examples of foreign guidelines. As a result, the role of guideline in (1)Activation of BIM (2)Support BIM process (3)Support and enhance collaboration (4)Standardized implementation of construction information (5)Technical support for BIM utilizing technology. It also classified the role of each guideline, standard and manual to establish detailed development directives. Besides, regarding the BIM process to clarify the goal to share among participants, information levels per stage and applicable scopes, for the sake of when to introduce BIM and how to use it properly, their contents were suggested in consideration of applicable BIM technologies based on business for each design stage at home.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.8
• /
• pp.651-658
• /
• 2014

Notification 2013-611 of MOLIT has come into effect. It relates primarily to new standard impact source. In this study, an in-depth experimental analysis of the difference between a bang machine and an impact ball was performed via field testing of shear wall and flat plate structure at 51 sites. This paper focuses on the difference in single number quantities between a bang machine and an impact ball. At wall thicknesses of 180 and 210 mm in shear wall structure, the single number quantities exhibited differences of 3.1 and 4.5 dB, respectively, and at thicknesses exceeding 250 mm in flat plate structure, the difference was constant at 4.6 dB. With regard to flat plate structures, the single-index difference increased up to 11 dB as the thickness of the floor slab increased. In general, the highest level of contribution for the bang machine was 63 Hz, irrespective of thickness determining bandwidth. The highest level for the impact ball were 63 Hz and 125 Hz. In future research, when reviewing additional field performance measurement data, it will be necessary to consider a detailed examination instead of the current method of uniformly adding 3 dB for all thicknesses and types of structures.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.735-747
• /
• 2018

Radon radiation exposures in home have been posed as a potential cancer hazard. This research aims to present the basic data of the indoor radon concentration level by examining the radon exhalation rates of wood species. Radon exhalation rates from five commonly used wood species in Korean wood building construction were measured with Continuous Radon Monitor (CRM), Model 1028 (Sun Nuclear Co., USA) using the Closed Chamber Method (CCM). The mass exhalation rate was observed to vary from $0.00089Bq{\cdot}kg^{-1}{\cdot}h^{-1}$ to $0.00181Bq{\cdot}kg^{-1}{\cdot}h^{-1}$, whereas the surface exhalation rate was observed to be $0.00677-0.01517Bq{\cdot}m^{-2}{\cdot}h^{-1}$. The radon exhalation rate of Quercus accutissima Carruth (white oak) which has the highest density showed the highest figure among the five wood species, on the other hand, the rest of four species showed similar results which were similar to the radon exhalation rates of wood in the U.S.A. and Canada. The average of the concentration measured by the CCM represented well up to the second half-life period (7.7 days). Because result of these small quantities seems to indicate that radon exhalation from the tested wood species has almost negligible impact, the main culprit of the high indoor radon concentration is clearly derived from the background of surrounding wood house. Therefore, as a safety precaution, infrastructures made of wood materials should be designed with the consideration of influx of radon and built accordingly. Furthermore, it is highly desirable that wood will be needed to use for furniture and interior finishing material in indoor environment.