• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.12-16
• /
• 2011

Building Information Modeling (BIM) is being widely spread in AEC industry worldwide and also in South Korea. Although the creation of digital model is better to be started at design stage, it can also improve the productivity of construction by simulating the actual construction process and environment. This paper presents application of BIM-based simulations related with design changes to transfer floors in 58-storey reinforced concrete office building. Transfer floor is not only a structurally important part of the building but also a challenging part of the actual construction in terms of sequence and period due to the complexity of the work. Preconstruction of rebar, mechanical, and plumbing is performed to review the construction drawings and to perform clash detection. Each item of application is evaluated for its effectiveness on actual construction and for the development potential.

• Wind and Structures
• /
• v.6 no.2
• /
• pp.91-106
• /
• 2003

The paper presents the results of 1:50 geometrical scale laboratory modeling of wind-induced point pressure on the roof of the Texas Tech University (TTU) test building. The nominal (prevalent at the TTU site) wind and two bounding (low and high turbulence) flows were simulated in a boundary-layer wind tunnel at Colorado State University. The results showed significant increase in the pressure peak and standard deviation with an increase in the flow turbulence. It was concluded that the roof mid-plane pressure sensitivity to the turbulence intensity was the cause of the previously reported field-laboratory mismatch of the fluctuating pressure, for wind normal and $30^{\circ}$-off normal to the building ridge. In addition, it was concluded that the cornering wind mismatch in the roof corner/edge regions could not be solely attributed to the wind-azimuth-independent discrepancy between the turbulence intensity of the approach field and laboratory flows.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.123-130
• /
• 2010

A lot of construction companies in overseas markets of construction try to change 2D CAD to 3D CAD for improving business ability and change to Building Information Modeling(BIM) for integrating information produced from construction life cycle. In America, GSA(General Service Administration) requires a design drawing planed by BIM and in Singapore and Europe, the government encourages architectures to use this tool. Recently in the domestic market, many organizations related construction industry are aware of importance of 3D CAD integrated information, and try to use BIM. Therefore, this research would analyze how does BIM affect construction industry and derive influence factors and provide basic data for using BIM.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.125-132
• /
• 2012

In this study based on BIM(Building Information Modeling) apply for performing efficient remodeling project and utilized. And this study will examine a real project where a BIM based process was used in the remodeling of an single-family homes. In the remodeling design phase of the planning process was conducted for the BIM process modeling, BIM in the remodeling stage while performing the required range and level of the remodeling process were studied. Based on this, communication between client and remodeling designer, participants more expect that smooth and speeds up in remodeling. For client decision support, troubleshooting of remodeling of the design process to be effective in the BIM have been identified. The BIM model and deliverables data used for the remodeling design process of building remodeling is the most effective way, due to the increased efficiency gained in many areas.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.04a
• /
• pp.71-78
• /
• 1993

This study serves as a part for the development of an integrated structural design system. Efficient data management is essential in engineering computer applications where the volume of data is large and the data flow and sharing are required. From a viewpoint of computer application, building structures can be considered to be a mass ofdata. The centralized database(CDB) and database management system frees the application from the details of managing data storage and retrieval while providing a common pool of information. For this, systematic information analysis and modeling have to be preceded. In this paper we described the result of database modeling of building structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.793-803
• /
• 1997

Open networking architecture is required to support new multimedia services as integrated functions of network management and service architecture. In this paper, we propose the methodology of building block modeling using object grouping concepts and the sharing scheme of different distributed processing environments based on open networking architecture. The building block has the functions of object management, security object instance registry and object mapping in object group. It is necessary for the connection management information to be shared on the interworking between two domains. We implemented and validated connection management functions using computational object modeling and building block modeling in different distributed processing environments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.41-43
• /
• 2013

Cloud BIM(Building Information Modeling) System은 건설 프로젝트에서 생성되는 정보들을 프로젝트 참여자가 네트워크 환경에서 BIM 데이터의 활용과 공유를 목적으로 개발되고 있다. 본 작업일보와 연동한 Cloud BIM System 프로토타입은 시공현장의 실제 상황과 좀 더 현장감있고 정밀하게 관리할 수 있도록 작업일보를 BIM 체계로 개발함으로써, 시설물의 3차원 가시화를 통하여 시공현황 및 진도계획을 신속, 정확하게 파악할 수 있도록 BIM 3차원 모델을 관련 데이터와 연동하여 확인할 수 있게 하였다. Cloud BIM System 보급을 통하여 설계업무 외에도 작업일보와 시공진도 간의 정확성 향상, 공종간의 간섭확인 등 시공 현장에서의 BIM 활용확대를 촉진할 수 있을 것이다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.233-234
• /
• 2022

In order to minimize casualties in case of a fire in a building, it is necessary to anticipate the time required for evacuation of occupants and the delay in evacuation in advance, and prepare countermeasures for possible occurrences. In fact, various factors that cannot be predicted exist and cannot be considered by excluding them, so the risk is predicted and evaluated through quantitative evacuation modeling. In order to understand this, we analyzed domestic and international evacuation modeling research trends. For about 40 years, starting with the characteristics of human movement, an evacuation modeling technique based on scientific methods has been developed through actual fire accident cases and various real-world experiments with humans. Then, in order to analyze the natural reaction of humans, which has a decisive influence in the recognition and decision-making phase, evacuation modelling studies have been conducted in depth using psychological and physical experimental methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.285-286
• /
• 2021

These days, interior construction is performed to prevent the deterioration of old building finishings or to make distinctive designs. In case of interior construction, a construction cost is estimated through basic 2D drawings in the design step. Accordingly, an efficient construction plan and direction is established according to budget. In such a case, construction is dependent on 2D drawings. At that time, a risk can occur easily. This study is aimed at reducing the cost and risk of interior construction by implementing 3D drawings with the use of the visual data of 2D drawings. For accurate analysis, 2D drawings were completed, and then 3D interior construction modeling for various buildings was conducted with the 3D modeling software 3D Max. According to the 3D modeling, it reduced the cost and risk more than 2D drawings based design, and influenced the improvement in the understanding of orderers and workers.

• Journal of KIBIM
• /
• v.13 no.4
• /
• pp.13-25
• /
• 2023

Recently, interest in the necessity and practical application of BIM (Building Information Modeling) is also increasing in the civil engineering field. However, there are difficulties in building BIM models and utilizing BIM modeling in the civil engineering field due to various reasons. To this end, it is necessary to develop management tools and research on management methods that can effectively utilize the BIM library in the civil engineering field. Libraries in the civil engineering field are complementary to each other, so library management in consideration of library management in various combinations and continuous updates is important. BIM library management was proposed through the development of a management tool that reflects these characteristics, which is expected to contribute to improving productivity in the field of civil design.