• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.65-80
• /
• 2021

Irregularities of a building in plan and elevation, which results in the change in stiffness on different floors highly affect the seismic performance and resistance of a structure. This study motivated to investigate the seismic responses of high-rise steel-frame buildings of twelve stories with various stiffness irregularities. The building has five spans of 3200 mm distance in both X- and Z-directions in the plan. The design package SAP2000 was adopted for the design of beams and columns and resulted in the profile IPE500 for the beams of all floors and box sections for columns. The column cross-section dimensions vary concerning the number of the story; one to three: 0.50×0.50×0.05m, four to seven: 0.45×0.45×0.05 m, and eight to twelve: 0.40×0.40×0.05 m. Real recorded ground accelerations obtained from the Vrancea earthquake in Romania together with dead and live loads corresponding to each story were considered for the applied load. The model was validated by comparing the results of the current method and literature considering a three-bay steel moment-resisting frame of eight-story height subject to seismic load. To investigate the seismic performance of the buildings, the time-history analysis was performed using ABAQUS. Deformed shapes corresponding to negative and positive peaks were provided followed by the story drifts and fragility curves which were used to examine the probability of collapse of the building. From the results, it was concluded that regular buildings provided a seismic performance much better than irregular buildings. Furthermore, it was observed that building with torsional irregularity was more vulnerable to seismic failure.

• 토지주택연구
• /
• 제13권1호
• /
• pp.113-129
• /
• 2022

건축물의 친환경성에 대한 심도 있는 검토는 건축물의 LCC를 비롯하여 다양한 가치판단에 직결된다. 그러나 전통적 설계방식은 친환경성이 최적화된 건축물 대안을 제시하는 데 한계를 지닌다. 따라서 본 연구는 건축계획 단계에서 기후, 도시와 같은 미시적 측면의 지역조건을 계획에 반영하여 친환경성이 최적화된 건축물 대안을 도출할 수 있는 의사결정 보조도구를 제시하는 것을 목적으로 수행되었다. 이를 위해 정부기관인 국토정보플랫폼에서 제공하는 수치지형도의 등고선, 건물, 도로 정보를 기반으로 건축대지 인근 지역의 3차원 모델링 작성 및 태양환경 분석을 수행할 수 있는 알고리즘을 제작했고, 알고리즘의 유효성을 확인하기 위해 기축 건축물 입면 방향과의 일사량 및 일조시간을 비교하여 최적향 산출 가능 여부를 검토했다. 그 결과, 도출된 최적향이 기축 건축물의 정면향 대비 더 높은 일사량 및 일조시간을 확보할 수 있다는 비교분석 결과가 도출되었으며, 이를 통해 개발 알고리즘이 태양입사 환경관점에서 유효한 입면 방향을 산출할 수 있음이 확인되었다.

• 한국농촌건축학회논문집
• /
• 제6권2호
• /
• pp.31-42
• /
• 2004

Although the coastal area of Jeju has already been developed, it has high pressure and demands for development continually increasing due to the increase of tourism and leisure activities. Therefore, the purpose of this study is to present objective guidance for the planning of the buildings on the seaside road with a view which have the largest impact on coastal landscape in order to enhance its visual quality. The results of this study are as follows : 1) It is chief element to make guidance for the use and planning of buildings in the conservation of the coastal landscape. 2) The D/H ratios which immediately influence an angle of elevation are different one another for the whole street. To ensure a sense of openness for the landscape, it is needed to maintain under $27^{\circ}$ angle of elevation, which demands 1~3 D/H ratio. 3) It is important to make 2.4 visual blockage ratio for whole street, but the actual condition is 4.48 ratio on average. To bring down the visual blockage ratio, the W/D ratio needs to be regulated. 4) Various techniques are also needed for lively building styles going with coastal landscape.

• 대한원격탐사학회지
• /
• 제23권3호
• /
• pp.199-209
• /
• 2007

Traditionally, aerial images have been used as main sources for compiling topographic maps. In recent years, lidar data has been exploited as another type of mapping data. Regarding their performances, aerial imagery has the ability to delineate object boundaries but omits much of these boundaries during feature extraction. Lidar provides direct information about heights of object surfaces but have limitations with respect to boundary localization. Considering the characteristics of the sensors, this paper proposes an approach to extracting buildings from lidar and aerial imagery, which is based on the complementary characteristics of optical and range sensors. For detecting building regions, relationships among elevation contours are represented into directional graphs and searched for the contours corresponding to external boundaries of buildings. For generating building models, a wing model is proposed to assemble roof surface patches into a complete building model. Then, building models are projected and checked with features in aerial images. Experimental results show that the proposed approach provides an efficient and accurate way to extract building models.

• 건축역사연구
• /
• 제14권1호
• /
• pp.7-19
• /
• 2005

The purpose of this paper is the study on the piazza plan of basilica S. Pietro. The results of study are as follows: 1. The piazza of the basilica S. Pietro was planned in relation to building-piazza-symbol of interior piazza-street as city planning characteristic of Baroque and architectural characteristic of elliptical piazza form. 2. The function of piazza of basilica S. Pietro was planned for religious meeting of a grand scale than a piazza for the common run of people. 3. In general, the disposition, ground, elevation and section plan of the piazza of basilica S. Pietro was planned by principle of spatial and formal composition, according to axis, symmetry, proportion, division and contrast. 4. The location, scale, shape of piazza for disposition and ground plan of the piazza of basilica S. Pietro was basically decided by not only elements of Basilica building, Vatican Palace, Street and Walls of surroundings with axis of the Basilica building, but Fountain and Obelisk as existing constituent elements. 5. The elevation of the piazza of basilica S. Pietro was composed of boundary that was enclosed from wall of trapezoid piazza and gallery of elliptical piazza with equal height as symmetry. And the section plan was planned to approach into the Basilica through slope and stairs of gentle angle, utilizing of existing land form.

• 대한환경공학회지
• /
• 제36권8호
• /
• pp.570-578
• /
• 2014

수심이 낮은 하구에서 바람이 국부적인 해수면 상승/하강에 미치는 영향을 연구하기 위해 Mobile Bay에 3차원 해수 순환모델을 적용하였다. Mobile Bay의 남단 경계면, 즉 northern Gulf of Mexico에서 시작된 조위는 Mobile River system 북부까지 직접적인 영향을 준다. 그러나 Mobile Bay 남단에서 발생한 조위변화는 Mobile Bay 북부로 이동하면서 Mobile River system으로부터 들어오는 담수와 국부적 바람의 영향으로 왜곡된다. Mobile Bay 남단에 위치한 기상관측소에서의 바람정보를 Mobile Bay 전체에 적용하였을 경우 Mobile Bay 북부에서 실제보다 강한 바람의 영향으로 과대한 수위 상승과 하강 현상이 발생하였다. 그러나 Mobile Bay 남단과 중단에 위치한 두 개의 관측소에서 측정된 바람 정보를 활용하였을 경우 Mobile Bay 북부에서의 조위 변화를 보다 정확하게 재현하는 것으로 나타났다. 특히 바람의 강도가 센 경우 Mobile Bay 남단과 북단의 풍속이 현저하게 차이나는 것으로 나타났으며(~ 88%), 이는 Mobile Bay 북단에서 나무와 건물 등의 영향으로 바람의 강도가 급격하게 줄어들었기 때문으로 판단된다. 따라서 Mobile Bay와 같이 수심이 낮고 국부적으로 풍속이 다른 하구 또는 만에서의 수위변화 재현 또는 예측을 위해서는 국부적인 바람 정보가 매우 중요한 것으로 연구되었다.

• 한국주거학회논문집
• /
• 제5권2호
• /
• pp.77-86
• /
• 1994

The attempts in pursuit of humanity in contemporary architecture brought about meaning to the 'Locality as a main conception which opens new potentiality at this confused period. Contemporary housing design should meet the indigenous ‘Locality’ of the building sites environment. An adequate adaptation to the ‘Locality’ will bring more efficient use, lower running-costs, and longer durability of original beauty of the houses. Our contemporary houses should admit general requirements at this time and they should be expressed through not only space but also form and design. Finally, we must find the direction of elevation planning of Korean contemporary houses, inquiring into design elements of ‘Locality’ in the view point of transformation and analyzing how the elements are represented in contemporary houses. This research was aimed to find how to optimize an elevation design of houses in adapting to the Korean indigenous ‘Locality’ in order to create a domestic housing design suitable for Korean life style, however, one cannot ignored elements of the Korean traditional mode of living.

• 교육시설
• /
• 제10권1호
• /
• pp.5-14
• /
• 2003

This study is performed to improve the elevation design of schools by the tools of color. Color is a very powerful design tool, one that is capable of altering the perception of a building or a space. The present form and material of elevations of schools are very monotonous and uniform. Therefore students do not have attachment for schools. And also in neighborhood, schools do not function as a good landmark. This study aims to develop good sample of exterior color design for schools and verify the guideline of color design for schools which was went ahead of this study. Through the survey of color preference and color image preference of the students of Seoul High School, the attitude of students to color were considered in design. The exterior color design for Seoul High School was realized. The result of this study suggests that the exterior color design can improve the image and plasticity of present schools. But within the monotonous character of present elevation, the effect of color design will be limited. Therefore to make a effective project, exterior color design should be accompanied with the alteration of elevation to make a plastic element of elevation.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.7-13
• /
• 2001

Geospatial Information Systems (GIS) have been employed to systematically manage and design land use in urban areas. This has increased the need for more accurate vector and raster data. In Korea, l/l,000-scale digital maps are used as vector data for the facility management in urban areas. This has increased the need for large scale orthoimages. Orthoimages generated from aerial imagery can provide accurate information, making possible the more effective city management. However, there is a large problem in using the orthoimages, i.e., currently available conventional orthoimages have not been generated based on Digital Elevation Model (DEM) that takes into account the building heights. So this causes the displacements of building image in large scale orthoimages. The present study is an attempt to generate the large scale orthoimages based on building DEM. The semiautomatic building extraction method can detect building outlines by mouse clicking on either building roofs or corners. Building DEM, based on the outline and calculated building height, was used to produce the large scale orthoimages with the corrected building occlusion.

• 건축역사연구
• /
• 제7권1호
• /
• pp.109-120
• /
• 1998

Mekuro-Kazoen BLDG. is a complex of office, hotel, and banquet halls, builted in 1991, Tokyo, Japan. This building suggest us various issues about the representation of traditionality in current architecture. We can find the possibility of representation of traditionality in large complex, in past, rarely applicated. Even in Japan, such trial in official building as New Office Building of Tokyo in Sinzuku shows a application only in the elevation plan. In Mekuro-Kazoen BLDG, the applications of traditionality are found not only in external appearance, but also in interior design. And the traditional Japanese gardens in front of building and in atrium enrich the traditionality And the modenity and traditionality in this building are represented simultaneously not deteriorating each other. The issue of representation of traditionality in architecture should be succeed not only in now but also in the future. The method of application need to be studied and improved. The fields of application also should be extended such as large complex buildings and future-oriented buildings.