• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.402-409
• /
• 2008

Wind loads and environments in realistic situations surrounded by neighboring buildings may be considerably different from those in idealized or simplified situations such as codes and standards. Interference effects of change in wind passage of a building group on wind loads and wind environments are reviewed. Wind-induced interference effects depend mainly on the building geometry and arrangement of these structures, their orientation and upstream terrain conditions. The most important factor among them may be the arrangement of building structures which can change the wind direction directly. Interference effects regarding wind loads are discussed with examples of window damages by typhoon and of pressure measurements in the boundary layer wind tunnel. Wind environment problems are also discussed, specially underlined on pedestrian comfort and safety. Various evaluation techniques or standards of wind environment are introduced. The change of wind velocity between the panel-type apartment buildings is examined, depending on the distance each other.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.9-10
• /
• 2011

Domestic construction industry suffered from the IMF and makes a great effort to improve in 'cost management', 'strengthening the competitiveness of the construction industry'. Therefore, the industry has become interested in improving the productivity of construction and ongoing research is being progressed in various angles. In such circumstances, the needs for a study of concepts and space of the actual construction work place is emerging. This study were utilized BIM to understand the types and causes of problems in space during the finishing work in construction and categorize importance and frequency of occurence through a survey of experts and AHP to analyze the realtive effects of importance then modeling to them to aware of issues and give direction for efficient management. This study is anylize the problem which is caused by same time process in finishing work progress of apartment applied by BIM. and categorize the type of work interference management in finishing work, and anylize by the type of occurence then predict the work interference management through in BIM 3D VIEW and suggest the solutions.

• KIEAE Journal
• /
• v.13 no.2
• /
• pp.53-60
• /
• 2013

This study examined the building envelope structure used in small housings near urban area which have not good energy source in relation to the application of passive design for energy saving of small-sized architectural design firms in local cities and aimed to provide the basic materials of future design direction of designers and housing owners by analyzing economy of a project in order to know the amount of energy saving and additional expenses depending on the building envelope pattern. As a result of comparing and examining the energy saving cost from the period of use compared to investment by the thickness of insulating materials based on building envelope pattern for energy saving, it was found that the thicker the insulating materials are, the more energy saving amount is. While the current bead-type insulating materials have short payback period due to low initial investment, extruded insulating materials show the difference of five years compared to bead-type insulation because of its high initial investment.

• Journal of Environmental Impact Assessment
• /
• v.19 no.6
• /
• pp.583-590
• /
• 2010

To determine nocturnal inversion characteristics at the leeward side of high-rise building, air temperature data were observed at 10 minute interval from February 22, 2010 to April 15, 2010. The observed data were compared, analyzed and examined to illustrate air temperature differences between the roof (XAR) and surface (XAG) of X apartment. The wind speed, wind direction and precipitation data were also observed at XAR and YJL (Yangjae Stream) sites at the same time. After the analysis, the maximum nocturnal inversion was observed by $4.0^{\circ}C$ at 3:40, 3:50, 4:10 on February 24th 2010, at that time the weather condition was clear and weak wind. Air temperature inversions at the leeward side of high-rise building were observed on whole day in wintertime and air temperature inversion intensity was also higher than other nearby area (SMG).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.7_spc
• /
• pp.473-483
• /
• 2016

In this paper, seismic performance assessment has been examined for a mid-rise RC building subjected to 2016 Gyeongju earthquake occurred in Korea. For the purpose of the paper, 2D external and internal frames in each direction of the building have been employed in the present comparative analyses. Nonlinear static pushover analyses have been conducted to estimate frame capacities. Nonlinear dynamic time-history analyses have also been carried out to examine demands for the frames subjected to ground motions recorded at stations in near of Gyeongju and a previous earthquake ground motion. Analytical predictions demonstrate that maximum demands are significantly affected by characteristics of both spectral acceleration response and spectrum intensity over a wide range of periods. Further damage potential of the frames has been evaluated in terms of fragility analyses using the same ground motions. Fragility results reveal that the ground motion characteristics of the Gyeongju earthquake have little influence on the seismic demand and fragility of frames.

• Wind and Structures
• /
• v.18 no.1
• /
• pp.57-67
• /
• 2014

For a building with a dominant windward wall opening, the wind-induced internal pressure response can be described by a second-order non-linear differential equation. However, there are two ill-defined parameters in the governing equation: the inertial coefficient $C_I$ and the loss coefficient $C_L$. Lack of knowledge of these two parameters restricts the practical use of the governing equation. This study was primarily focused on finding an accurate reference value for $C_I$, and the paper presents a systematic investigation of the factors influencing the inertial coefficient for a wind-tunnel model building including: opening configuration and location, wind speed and direction, approaching flow turbulence, the model material, and the installation method. A numerical model was used to simulate the volume deformation under internal pressure, and to predict the bulk modulus of an experimental model. In considering the structural flexibility, an alternative approach was proposed to ensure accurate internal volume distortions, so that similarity of internal pressure responses between model-scale and full-scale building was maintained. The research showed 0.8 to be a reasonable standard value for the inertial coefficient.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1053-1060
• /
• 2016

As location recognition for autonomous vehicles develops, the need for a precise map for autonomous driving has increased. A precise map must be built based upon accurate position. Recent studies have accelerated research in this area by using various sensors that calculate the accurate position by comparing and recognizing objects around the roads. However, application of such methods is limited because these studies only take objects with significant verticality into consideration. Thus, new research is needed to overcome the limitations: a method that is not constrained by the existence of certain types of surrounding objects shall be proposed. Most roads contain road marking information, such as lanes, direction signs, and pedestrian crossings. Such information on the road surface is a valuable resource for building a precise map. This paper proposes a method of building a precise map by using road marking information.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1787-1795
• /
• 2009

This paper describes an automation of architectural design processes and the direction between this automation and robotic system in building construction using the concept of the object-oriented design in architecture. The research starts from the premise that many computer-aided design systems are mostly aimed at serving as drawing tools which are used only after a design formal solution has already been established by the architect. If the computer is well applied to the architectural design process, many positive things such as standardization of design detail, increasing productivity and collaboration, minimizing construction costs etc. can be done. To support an early design solution in the computer-based environment, the proposed automation was developed and tested in a real building project, using the object-oriented design concept such as product model. This design automation gives various design alternatives from the early design phase to the final stage of design details, according to musical harmony. This paper shows how architectural design process can be automated and how the data of the applied architectural design can be integrated into product model environment, in relation to robotic system in building construction.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.59-67
• /
• 2018

Purpose: The concept of the Barrier-Free Design has steadily expanded into a basic principle of design, which can provide safe and convenient lives not only limited to the disables, elders, and pregnant women, but also to all members of the society. This is what we now know as the Universal Design. In other words, Barrier-Free Design for all is Architectural Approach of Universal Design. Thus, as a future-oriented alternative to school facilities according to social change, this study suggests basic direction of school building planning and concept of universal design considering school facilities characteristics. Methods: The characteristics of school facilities are understood from the perspective of Universal Design. In addition, a survey is conducted to identify the current state of school facilities. Result: Findings from this study are as follows. First, Universal Design of School Building is an integrated characteristic. Integration is intended to create and manage an integrated environment instead of an individual and one-time approach to installation and maintenance of convenience facilities. Second, It is a flexible characteristic to be sustainable. In other words, they aim to be selectable to respond to change. Third, It is a characteristic of accumulation of outstanding cases. This means that not only individual schools but also entire school spaces will be applied to Universal Design to form a virtuous circle of environment improvement. Implications: The results of this study may serve as a basic concept in the design of school buildings.

• Korean Journal of Childcare and Education
• /
• v.15 no.4
• /
• pp.83-113
• /
• 2019

Objective: The purpose of this study was to examine the experiences of mothers who participated in the training of consultants for the purposes building an early childhood educational community. Methods: Participants were 14 mothers in the first phase, 10 mothers in the second phase, and 8 mothers in the third phase. Data were collected from stories shared during the learning community activities. The mothers' experiences were analyzed according to qualitative analysis procedures. Results: Mothers' experiences of participating in the training of consultant for building early childhood educational community were categorized into three themes and seven sub-themes. The first theme was "self as a parent" including "looking inside myself in the parent-child relationships" and "looking inside myself in the relations with other mothers". The second theme was "self as a member of the community" which consisted of "sharing emotions through ritual", "forming communitarian identity through hospitality and solidarity" and "growing as a social mother". The third theme was "self as a educational community consultant" out of which emerged "setting up shared visions", "building practical community competence", and "creating fields of community implementation". Conclusion: The results suggested there are implications for the effective practices of building an early childhood education community and the direction and methodology of parent education.