• Title/Summary/Keyword: building block

Search Result 729, Processing Time 0.036 seconds

Impact of Building Blocks on Inundation Level in Urban Drainage Area (지표 건물이 도시유역의 침수특성에 미치는 영향)

  • Lee, Jeong-Young;Ha, Sung-Ryong
    • Journal of Environmental Impact Assessment
    • /
    • v.22 no.1
    • /
    • pp.99-107
    • /
    • 2013
  • This study is an impact assessment of building blocks on urban inundation depth and area. LiDAR data is used to generate two original data set in terms of DEM with $5{\times}5$ meter and building block elevation layer of the study drainage area in Cheongju and then the building block elevation layer is modified again to the mesh data with same size to DEM. Two-dimensional inundation analysis is carried out by applying 2D SWMM model. The inundation depth calculated by using the building block elevation layer shows higher reliability than the DEM. This is resulted from the building block interference to surface flow. In addition, the maximum flooded area by DEM is two times wider than the area by building block layer. In the case of the surface velocity, the difference of velocity is negligible in either DEM or building block case in the low building impact zone. However, If the impact of building on the surface velocity was increase, the gap of velocity was significant.

The Layout Design of Structured Building Block Integrated Circuit (조립된 Building Block IC의 설계디자인의 문제)

  • Yi, Cheon-Hee
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.24 no.6
    • /
    • pp.1056-1067
    • /
    • 1987
  • This paper presents a design procedure for building block integrated circuits that is based on the digraph relaxation model. A set of optimization procedure is prosented for a minimum area and routing-fecsible placement of IC building blocks. Chip area optimization is subject to perimeter and area constraints on the component rectangles in the dissection.

  • PDF

우리 은하의 초기 Building Block으로부터 유입된 subdwarf B 항성의 개수 추정

  • Na, Jong-Sam;Lee, Jae-Hyeon;Son, Sang-Mo;Han, Sang-Il;Lee, Yeong-Uk
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.36 no.2
    • /
    • pp.146.1-146.1
    • /
    • 2011
  • 최근의 관측에 의하면 우리 은하의 헤일로내 field에 위치한 subdwarf B 항성이 헬륨이 증가된 구상성단의 푸른 수평계열성 ( Extreme Blue Horizontal Branch ) 과 동일한 기원을 가질 것으로 예측된다. 초기 우주 환경과 비슷한 헬륨 함량을 보이는 환경에서는 Building Block 내부 이외에는 헬륨이 충분히 증가된 가스를 공급할 수 없기 때문에 이러한 기원을 가지는 sdB 항성의 개수를 예측함으로써 우리 은하의 초기 Building Block으로 부터 얼마나 많은 수의 항성이 헤일로에 뿌려졌는지 예측할 수 있다. 우리는 우리 은하내 나이가 많은 항성들로 이루어진 헤일로와 Bulge 내에 이러한 기원을 가지는 sdB 항성의 개수를 예측한 결과, 초기 Building Block으로 부터 유입된 sdB 항성이 최소 8만 여개 이상일 것으로 추정하였다. 이 개수는 우리 은하 구상 성단 중 은하 Building Block의 잔재로 생각되는 성단에 존재하는 헬륨이 증가된 수평계열성의 총 합의 10배 이상의 규모에 해당한다. 이는 이들 성단이 은하 생성 초기에는 현재의 질량 규모보다 최소 10배 이상 무거웠을 것이라는 가정과 일치하는 결과이다.

  • PDF

Evaluation of the Outdoor Radiant Thermal Environment by Building Scale and Block Type of Office Building in Summer (사무소건물의 규모 및 배치유형에 따른 하기 옥외 복사열환경 평가)

  • Park, Su-Jin;Jung, Sun-Young;Yoon, Seong-Hwan
    • Journal of the Korean Solar Energy Society
    • /
    • v.29 no.6
    • /
    • pp.81-87
    • /
    • 2009
  • The purpose of this study is to evaluate of the outdoor thermal environment by building scale and block type as variable factors. In this study, 18 cases of office in central business district that have different condition are compared about their surface temperature, HIP(Heat Island Potential), and MRT(Mean Radiant Temperature). They are simulated with 3-dimension numerical simulation software named Hoyano-model. The output results contain visualized distribution chart and numerical data. The results of evaluation are as follows. (1)The surface temperature of the building becomes higher as building coverage ratio is higher but floor area ratio is lower. In same conditions, unified block type is maximum $3.2^{\circ}C$ higher than divided block type. (2)HIP shows different daily pattern as block type. During daytime, divided block type is much higher than unified block type but after sunset, it is changed. (3)MRT shows different distribution pattern as sunlight moves expecially at noon. (4)As the results of this study, cases that have high floor area ratio condition show lower surface temperature by tendency to stay low indoor temperature in office building and big rate of windows on building surface.

A Study on the Generation of the Production Material Information of a Building Block and the Simulation of the Block Erection (선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구)

  • Lee K.Y.;Roh M.I.
    • Korean Journal of Computational Design and Engineering
    • /
    • v.11 no.2
    • /
    • pp.115-127
    • /
    • 2006
  • At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection using the 3D CAD model, which was generated from the initial hull structural design system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, etc. of a building block was proposed as well. Moreover, the simulation method of the block erection was proposed. Finally, to evaluate the efficiency of the proposed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

A Qualitative Research on Block Play for Children (유아들의 쌓기놀이에 관한 질적 연구)

  • Lee, Kyung Soon;Choi, Suk-Ran
    • Korean Journal of Child Studies
    • /
    • v.25 no.5
    • /
    • pp.95-110
    • /
    • 2004
  • This research employs the grounded theory approach among various qualitative methodologies in order to reach a deep understanding of both the experiential process that children undergo in block play and the essential meaning of it. The objects of this study are 22 children(female 7, male 15) in a 5-year-old class of K kindergarten at Guro district, Seoul. The result of this research shows that first, children take pleasure in block play because of the delight and sense of accomplishment in building, the joy in demolishing, and the happiness of embracing the world through dramatic play with building structures. Second, the characteristics of children's block play are popular subject of the play, decision of the subject, impromptu transformation and elaboration of building structures, and flow of the play according to friend/non-friend relationship. Third, the implicit rules shared by children have more significant influences upon the block play than the agreed rules at the beginning of semester.

  • PDF

Infants and Toddlers' Logico-mathematical Thinking Processes in a Block Building Activity (블록 쌓기 활동에서 나타난 만 0, 1, 2세반 영유아의 논리·수학적 사고)

  • Shin, Eun Soo;Kim, Hyun Jin;Lee, Sun Myoung
    • Korean Journal of Child Studies
    • /
    • v.36 no.2
    • /
    • pp.75-94
    • /
    • 2015
  • The main purpose of this study was to examine the various aspects of logico-mathematical thinking and its development by observing a block building activity undertaken by infants and toddlers. The subjects comprised 73 young children from between the ages of 12- to 41-months-old. The interviewee was individually asked to build "something tall", making use of 20 blocks. The results of this study were, first, a regular increase by age is seen in congruence, the vertical use of flat blocks, and innovative ways of using triangular blocks. Second, many types of logico-mathematical thinking processes, such as classification, seriation, spatial relationship and temporal relationship, were shown during the block building activities on the part of the 12- to 41-months-olds who took part in this study.

Hospital Costing Applied to Building Block Costing Methods Research (Building Block Costing 방법을 적용한 종합병원 원가계산 적용 방안 연구)

  • Kim, Young-Cheol;Kang, Kyung-Sik
    • Journal of the Korea Safety Management & Science
    • /
    • v.18 no.4
    • /
    • pp.91-97
    • /
    • 2016
  • Hospital costing has generally been using ABC costing method. However, based on increase of expensive equipment, the fixed cost is increased in the hospital industry. The most common equipment industry are using building block costing method for depreciation and equipment management costing elements. Additionally it presents three options that may be considered to be supported by the IT system to find the most appropriate alternative.

Development of Soil-cement in Earth-block Materials

  • Wiwattanachang, N;Maneein, N;Parwong, T;Nummeesri, K
    • International Journal of Advanced Culture Technology
    • /
    • v.3 no.1
    • /
    • pp.78-85
    • /
    • 2015
  • In Thailand, the electricity consumption is very high with the intention of reduce high temperature in the building. Since 2000, a lot of people paying attention to Green-Building concept. A similar concept is natural building, which is usually on a smaller scale and tends to focus on the use of natural materials that are available locally. Therefore, the Earth-Block (EAB) product is appropriated approach to reduce energy consumption in the buildings. The EAB is produced with environmentally friendly process, which does not release harmful pollution and effective cost. The main significant character is durable materials for building construction. This study aims to develop the new thermal insulation by using soil-cement with vetiver grass fibre. Additionally, it describes the innovative systems used in production of EAB materials by mixing the soil-cement with vetiver grass fibre. This paper reveals lowest costs, space configurations changing and greater design flexibility for constructing the building.