• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.511-515
• /
• 2014

The thermodynamic instability of bubbles in wet-foam colloidal suspension is due to the substantial area of their gas/liquid interface. Several physical processes lead to gas diffusion from smaller to larger bubbles, resulting in a coarsening and Ostwald ripening of wet foam. This includes a narrowing of the bubble size distribution. The distribution and microstructure of porous ceramics, the adsorption free energy and Laplace pressure of $Al_2O_3$ particle-stabilized colloidal suspension, and $SiO_2$ content were investigated for tailoring the bubble size. Wet-foam stability of more than 80% is related to the degree of hydrophobicity with contact angles of $62-70^{\circ}$ achieved from the surfactant. The contact angle replaces part of the highly energetic interface and lowers the free energy of the system. This leads to an apparent increase in the surface tension (26-33 mN/m) of the colloidal suspension.

• 대한방사선치료학회지
• /
• 제17권2호
• /
• pp.141-145
• /
• 2005

목 적 : 일반적으로 10 MV이상의 광자선에서 산란 중성자를 발생시키는 것으로 알려져 있다. 세관에 설치된 컨테이너 검색장치는 9 MV 이하였음에도 중성자가 누출되었다. 본 연구에서 의료기관에 설치된 방사선 치료기에서 산란 방출되는 중성자의 공간적인 측정을 통해 결과를 분석하고 평가하고자 한다. 대상 및 방법 : 본 연구의 방사선 발생장치는 의료용 선형가속기(linear accelerator, linac: Varian, Clinac 1800, USA)를 사용하였다. 중성자 측정용 검출기는 중성자가 발생하면 기포(bubble)이 생기는 Bubble 검출기(Bubble detector, BDPND type, BTI, Canada)를 사용하였다. 의료용 선형가속기 주변에 Bubble 검출기를 isocenter로부터 30 cm, 50 cm, 120 cm의 각각 3가지 거리별로 isocenter 상하 방향 네 곳에 위치시켜 측정하였다. 주변 구조물의 영향을 살펴보기 위해 Wedge와 Mount를 장착 후 50 cm 거리에서 각각 8방향에서 측정하였다. 광자선원부터 isocenter 까지의 거리(SAD: source-axis-distance)를 100 cm로 기준을 정하고 조사면의 크기(field size)는 $15{\times}15cm^2$로 정하였다. 방사선은 20 MU를 조사하여 Bubble 검출기에 발생한 기포수를 측정하며 mrem값으로 계산하였다. 결 과 : Isocenter부터 거리가 30 cm와 50 cm 떨어진 곳의 각각 8개 측정 지점 중에서는 모두 5번 위치(Gantry 우측 아래지점)에서 측정된 산란중성자의 양이 같은 거리라도 가장 높게 측정되었다. Bubble 검출기가 Isocenter부터 120 cm 떨어진 경우와 wedge를 장착한 경우는 7번 위치(Couch 우측 아래지점), mount 탈착한 경우는 2번 위치(Gantry 왼쪽 윗지점)에서 산란 중성자가 가장 높게 측정되었다. 결 론 : 산란중성자의 측정에서 직선상 같은 거리에 있는 곳이라도, 실제 측정한 결과 값에 따르면 서로 상이한 값을 보였다. 주변 구조물도 산란 중성자에 영향을 미치며, 직선상은 같은 거리라도 각각의 지점에서 다른 값을 보였다. 따라서, 산란중성자의 거리에 따른 영향은 단순히 직선으로의 거리뿐 아니라 방향과 주변 구조물에 대한 영향까지 고려하며 공간적인 측정과 평가가 필요하다.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.747-757
• /
• 1997

A numerical investigation of the fuel concentration field in a fluidized bed has been carried out for the scale-up of a fluidized bed combustor (FBC). A two-dimensional transient model is developed using the two-phase fluidization, a simple chemical reaction, and lateral solid mixing theories. The uniformity of fuel concentration distributions is controlled by the location and the number of fuel feeders, fluidizing velocities and the bed-heights. While larger bubbles owing to greater fluidizing velocities enhance the fuel-dispersion in the bed, they have adverse effects on fuel combustion and thus result in the increase of fuel concentration, since a greater bubble means a larger bypass which reduces gas-exchange rates between bubble and emulsion phases. Average or maximum values of the bed fuel concentration are utilized as criteria for the scale-up from a pilot/lab-scale to a commercial-size bed.

• 에너지공학
• /
• 제13권3호
• /
• pp.181-190
• /
• 2004

Computational models for analyzing the in-reactor behavior of metallic fuel pins under transient conditions in liquid-metal reactors are developed and implemented in the TRAMAC (TRAnsient thermo-Mechanical Analysis Code) for a metal fuel rod under transient operation conditions. Not only the basic models for a fuel rod performance but also some sub-models used for transient condition are installed in TRAMAC. Among the models, a fission gas release model, which takes the multi-bubble size distribution into account to characterize the lenticular bubble shape and the saturation condition on the grain boundary and the cladding deformation model have been developed based mainly on the existing models in the MAC-SIS code. Finally, cladding strains are calculated from the amount of thermal creep, irradiation creep, and irradiation swelling. The cladding strain model in TRAMAC predicts well the absolute magnitudes and gen-eral trends of their predictions compared with those of experimental data. TRAMAC results for the FH-1,2,6 pins are more conservative than experimental data and relatively reasonable than those of FPIN2 code. From the calculation results of TRAMAC, it is apparent that the code is capable of predicting fission gas release, and cladding deformation for LMR metal fuel finder transient operation conditions. The results show that in general, the predictions of TRAMAC agree well with the available irradiation data.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.195-203
• /
• 2018

Among the techniques of reducing the drag to increase the speed of underwater moving bodies, we studied on the drag reduction method by gas injection. Researches on gas injection method have been paid much attention to reduce the drag of vessels or pipe inner walls. In this study, we used a sintered metal mesh that can uniformly distribute fine bubbles by gas injection method, and applied it to a cylindrical underwater moving body. Using the KRISO medium-sized cavitation tunnel, we measured both the bubble size on the surface of the sintered mesh and the bubble distribution in the boundary layer. Then, drag reduction tests were performed on the cylinder type underwater moving models with cylindrical or round type tail shape. Experiments were carried out based on the presence or absence of tail jet injection. In the experiments, we changed the gas injection amount using the sintered mesh gas injector, and changed flow rate accordingly. As a result of the test, we observed increased bubbles around the body and confirmed the drag reduction as air injection flow rate increased.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.513-520
• /
• 2019

This study reports the improvement of mechanical properties of Al₂O₃ porous ceramics from colloidal suspension with the addition of carbon fiber by direct foaming. The initial colloidal suspension of Al₂O₃ was partially hydrophobized by surfactant to stabilize wet foam with the addition of carbon fiber from 2 to 8 wt% as stabilizer. The influence of carbon fiber on the air content, bubble size, pore size and pore distribution in terms of wet foam stability and physical properties of porous ceramics were discussed. The viscosity of the colloidal suspension was increased giving solid like properties with the increased in carbon fiber content. The mechanical properties of the sintered porous samples were investigated by Hertzian indentation test. The results show the wet foam stability of more than 90% corresponds to compressive loading of 156.48 N and elastic modulus of 57.44 MPa of sintered sample with 8 wt% of carbon fiber content.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1357-1363
• /
• 1994

난류전단 흐름에서의 기포응집에 따른 기포의 크기분포를 예측하기 위한 Monte-Carlo 모의모형을 개발하였다. 임의로 선택된 각 초기위치에 일련의 기포들을 매시각 발생시키고, 각 기포들의 움직임과 충돌을 모의함으로써 각각의 위치와 크기를 추적하도록 하였다. 기포의 횡방향 변위는 이송확산 방정식의 수치해를 이용하여 부여하였으며, 종방향 변위는 흐름의 대수유속분포 및 기포 상승속도로부터 주어지도록 하였다. 각 기포들간의 초기 상대위치와 상대변위를 이용한 기하학적 해석에 의하여 매시간단계에서의 기포응집을 탐지하여, 시간단계 말기에서의 기포 총수, 각 기포의 위치 및 크기를 결정하였다. 기포들의 크기 및 위치를 나타내기 위하여 소요되는 기억용량을 최소화하도록 전산모형을 구성하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2511-2514
• /
• 2008

As the minimum feature size decreases, techniques to avoid contamination and processes to maintain clean wafer surfaces have become very important. The deposition and detachment of nanoparticles from surfaces are major problem to integrated circuit fabrication. Therefore, cleaning technology which reduces nanoparticles is essential to increase yield. Previous megasonic cleaning technology has reached the limits to reduce nanoparticles. Megasonic cleaning is one of the efficiency method to reduce contamination nanoparticle. Two major mechanisms are active in a megasonic cleaning, namely, acoustic streaming and cavitation. Acoustic streaming does not lead to sufficiently strong force to cause damage to the substrates or patterns. Sonoluminescence is a phenomenon of light emission associated with the cavitation of a bubble under ultrasound. We studied a correlation between sonoluminescence and sound pressure distribution for the minimum of pattern damage in megasonic cleaning.

• 한국압력기기공학회 논문집
• /
• 제17권2호
• /
• pp.109-118
• /
• 2021

In the periodic surveillance material test for the spacer component of fuel channel assembly in CANDU, a microstructural characterization analysis is required in addition to the mechanical property evaluation test. In this study, detailed microstructure analysis and simple mechanical property evaluation of archive spacer parts were conducted to indirectly support the surveillance test and assist in the study of spacer material degradation. We investigated the microstructural characteristics of the spacer garter spring coil through comparative analysis with the plate material. The main microstructure characteristics of the garter spring coil X-750 are represented by the fine grain size distribution, the ordering phase distribution developed inside the matrix, the high dislocation density inside the grains, and the arrangement of coarse carbides. In addition, the yield strength of the garter spring coil X-750 was indirectly evaluated to be approximately 1 GPa. We also established an analytical method to elucidate the microstructural evolution of the radioactive spacer garter spring coil X-750 based on Canadian research experiences. Finally, we confirmed the measurement technique for helium bubble formation through TEM examination on the helium implanted X-750 material.

• 한국물환경학회지
• /
• 제28권1호
• /
• pp.129-136
• /
• 2012

In this century, scientists realized that carbon dioxide gas in the atmosphere cause a greenhouse effect which affects the planet's temperature. Therefore lots of attempts have carried out to decrease the discharge of carbon dioxide gas in the field. The dissolved carbon dioxide flotation (DCF) process was developed as an alternative of DAF process to decrease the discharge and reuse of carbon dioxide as well as to save energy consumption. To investigate the particle separation characteristics and the flotation efficiency of carbon dioxide, SCC model was employed in the DCF process which has been applied extensively for the evaluation and simulation in the DAF process. The simulation results by the SCC model revealed the predicted curve of flotation efficiency became decreased gradually over the optimal pressure range of saturator about 1.6 atm in accordance with the experiment results of the DCF pilot plant and the size distribution and the bubble volume concentration of $CO_{2}$ bubbles depending on the operation pressure of saturator. The findings through the simulation results led to the conclusion that there was no significant difference between $CO_{2}$ bubbles and air bubbles, affecting on the practical flotation efficiency, in terms of the initial collision and attachment efficiency.