• Korean journal of applied entomology
• /
• v.60 no.1
• /
• pp.99-103
• /
• 2021

This study was conducted to investigate the hatching rate of Pochazia shantungensis according to the treatment method of machine oil and the effect on apple quality by spawning. In the effect of machine oil treatment, when 20 times of the machine oil was spread by brush, the average hatching rate was 0.57%, and the sprayed branches showed an average hatching rate of 1%. When the machine oil agent was applied 50 times, the hatching rate was about 35% to spread by brush, whereas the spray treatment showed about 77%, so there were no difference from the non-treatment considering the deviation. There was no statistically significant difference in the quality of fruit even when apple fruits were fruited in the following year in the results of spawning and non-spawning of P. shantungensis in Hongro and Fuji varieties. In addition, there was no statistical significance in the difference between branch breakage and growth caused by spawning of P. shantungensis.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.281-286
• /
• 2004

The vacuum cleaner motor runs on very high speed for the suction power. Specially, the motive power is provided by the impeller being rotate on very high speed. And centrifugal fan consists of the impeller, the diffuser, and the circular casing. Due to the high rotating speed or the impeller and small gap distance between the impeller and diffuser, the centrifugal fan makes very high noise level at BPF and harmonic frequencies. In order to calculate the sound pressure of centrifugal fan, the unsteady flow data is needed. And Noise cause is dividing to fluid noise by exhaust flow of fan and vibration noise by rotational vibration of vacuum cleaner fan motor. Until now, measuring method has been used to measure vibration by the accelerometer; this method has been not measured for the vibration in some parts of brush and commutator because of motor construction and 3-D vibrating mode. This paper was purposed on the accurate analysis, using laser vibration analyzer,. By using this measured data of noise cause against the difficult part in old times, we would like to use for the design of silent fan motor.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.167-174
• /
• 2009

This study was conducted to develop an agaricus bisporus washing machine which uses compressed air to remove foreign materials attached on the surface of agaricus bisporus. A prototype of the washing machine was constructed, and performance of removing foreign materials was tested. Research results are as follows: 1. Several transferring methods including PE roller rotation, brush roller rotation, PE screw rotation, vibration plate, and belt conveyor were evaluated. Roller, screw, and vibration methods caused damages on the surface of the products, but belt conveyor method caused the least damages. 2. For air jet, a stationary nozzle type and a rotational type were evaluated. The best air jet nozzle was the jet-type nozzle, and the rotational type was more effective than stationary type nozzle. 3. With the conveyer belt, box type moving method and the rotational air jet nozzle, the washing machine showed the best performance when higher than 5.4${\times}$105 Pa of air jet pressure and lower than 0.047 m/s of moving speed was used. Working performance of the system was 650 kg/h, and the damaging rate was 1.2 %.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1169_1170
• /
• 2009

This paper introduces insulator pollutant accumulate pattern in the tunnel of korea railroad. To accomplish this goal, effective sample collecting method was proposed for the first step. Dust at the surface was collected directly. Distilled water and brush was used while collecting. Through this method dust is easily and accurately collected. The second step is pollutant analysis. Several analyze item is selected such as quantity, conductivity, contact angle, Optical Microscope(OM), IR, Equivalent Salt Deposit Density(ESDD), and ICP-AES. The third step, best represent tunnel was selected considering location, length and natural surroundings. Also to consider the difference at inside the tunnel, several bracket insulators were selected along to the location. To make the result precise, above procedure was repeated several times at the same target. Finally relation among type of train, numbers of movement, surroundings, length will be considered in combination with the pollution. With this result pollute map for KORAIL could be accomplished and inspect period will be optimized case by case.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.840-842
• /
• 2001

The cogging torque and torque ripple in motor which cause noise and vibration are an inevitable phenomenon and they give a bad effect to motor performance. So we are required to reduce the cogging torque and torque ripple not by electrical controlling but by changing the inner mechanical structure and we focused on the permanent magnet. In this research, we calculated current, torque, Back-EMF(electromotive force) and cogging torque according to the change of the magnet shape using two dimensional FEM(Finite Element Method). Maxwell stress tensor and time-stepping method. From the results, we present an appropriate model that can satisfy both low cogging torque, low torque ripple and high efficiency.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.3
• /
• pp.425-433
• /
• 2015

Objectives: The purpose of the study is to investigate the effects of life habits of some elders on subjective symptoms of periodontal disease. Methods: The subjects of the study were 287 elderly people in Jeonju, Jeollabuk-do by convenience sampling method. A questionnaire was completed by one to one interview method from January 17 to September 10, 2014. The questionnaire consisted of demographical characteristics and subjective symptoms of periodontal diseases by healthy life habits, dietary life habits, and oral healthy life habits. Data were analyzed by SPSS 18.0. Results: Smokers tended to have higher subjective symptoms of periodontal diseases than the non-smokers because smokers ingested more alcohol than the nonsmokers. The smokers tended to consume less meat, fish, beans and vegetables. The smokers did not brush their teeth frequently. They did not visit the dental clinics frequently for the scaling services. Conclusions: The development of oral health improvement program is very important and necessary for the elderly people and the program will enhance the health-related quality of life in the elderly.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1903-1905
• /
• 2002

The degree of contamination on outdoor insulator is one of the most important factors for the determination of insulation level. And the salt, NaCl, is known as the most dangerous contaminants in the most region of the world. As shown through the preceding study, we could find the close relationship between the generation and deposition of salt contaminants and the meteorological conditions. To analyze the relationship, we monthly measured the ESDD for some sites with brush wiping method, and daily measured the density for one site with the automatic measuring apparatus. And, with the measured data and the meteorological data from KMA(Korea Meteorological Administration), we analyzed the relationship between the two factors with regression method. Through the results of this investigation, we could quantify the comparative contribution of the climatic factors for the pollution level of outdoor insulator, and the results could be used as a useful reference for the maintenance of overhead lines and substations.

• Journal of Power System Engineering
• /
• v.14 no.1
• /
• pp.22-26
• /
• 2010

Generally, it is a method to remove the fouling cleaning the plate heat exchanger with chemicals or polishing with a brush or cloth after stopping the equipment and disassembling heat exchanger. However, the equipment must be stopped and taken apart when using this method, which causes an unnecessary work to assemble again after cleaning it. In this study, it has developed and tested the equipment which can automatically clean the fouling on plate heat exchanger at regular intervals with air bubbles. It indicated that the overall heat transfer coefficient had decreased without significant differences similar to that calculated without air bubbles until after 72 hours when making air bubbles to remove fouling ingredient on the surface of heat transfer area every 10 minutes per 2 hours. However, it showed that there was a 10% higher of heat transfer effect compared to the case without air bubbles of after 192 hours.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.925-931
• /
• 2016

The BLDC motor is used widely in industry due to its controllability and freedom from maintenance because there is no mechanical brush in the BLDC motor. Furthermore, it is suitable for high-speed applications, such as compressors and air blowers. For instance, for a compressor with a small impeller due to miniaturizing, the BLDC motor has to rotate at a very high speed to maintain the compression ratio of the compressor. Typically, to reach an ultra-high speed, airfoil bearings must be used in place of ball bearings because of their friction. Unfortunately, the characteristics of airfoil bearings change drastically depending on the revolution speed. In this paper, a BLDC motor with airfoil bearings is controlled with a PID controller. To analyze and determine the PID coefficients, the relay-feedback method is used. Additionally, for adaptive control, a fuzzy logic controller is used. Furthermore, the auto-tuning and self-tuning techniques are combined to control the BLDC motor. The proposed method is able to control the airfoil-bearing BLDC motor efficiently.

• Journal of Korean Academy of Nursing
• /
• v.34 no.1
• /
• pp.182-190
• /
• 2004

Purpose: This study was conducted to understand the health status and health behaviors of preschoolers to provide baseline data for developing health promotion programs. Method: Parents of children attending day-care centers were recruited for the study. Participating day-care centers were selected using a stratified sampling method. Data was collected from June to August 2002 using a questionnaire. Result: Among 754 preschoolers, 17.3% were overweight, while 18.2% were underweight. The most frequent infectious diseases that children have had previously were hand-foot-mouth disease (20.2%) and chicken pox (18.7%). Current health conditions that children have frequently are respiratory disease (28%) and atopic dermatitis (23.8%). Only 61% brush their teeth everyday at bedtime, 54.3% wash their hands every time after returning home, 8.8% wear bicycle helmets, 9.3% use a child car seat, and 8.1% eat fruits and vegetables five times a day. Children residing in the metropolitan area were more likely to have positive health behaviors, and children of parents with an advanced college level education were more likely to have positive health behaviors than those with only a high school level education. Conclusion: Based on the study results, health professionals could plan and develop health promotion programs to change unhealthy behaviors of preschoolers targeting high-risk groups.