• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.165-172
• /
• 2013

This paper describes a design for a spiral antenna with a conical wall to obtain the high gain. The gain and the axial ratio of the spiral antenna were improved by a new design that included a conical wall and an optimized Archimedean slit on the ground plane in a conventional antenna with a circular cavity wall and a 4.5-turn slit. A gain improvement of 9.5 dBi higher and a good axial ratio of 1.9 dB lower were measured by the added conical wall and the newly designed slit from the current distribution control on the ground plane, respectively. The measured return loss, gain and axial ratio of the proposed antenna showed a good agreement with the simulated results. The proposed antenna will be applied to a non-linear junction detector system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.4
• /
• pp.221-226
• /
• 2007

This paper propose a control network system based on IEEE1394 for a multi body robot control. The IEEE1394 has the characteristic of high speed(400Mbps), real-time, stability and plug&play. And IEEE1394 also supports freeform daisy chaining, branching and hot plugging, which reduce cabling complexity and make a system simple. Especially, multi host and broad casting support network data sharing method which is suitable for control network for multi body robot. Through experiment, we show that the proposed control network can interface 48 joints (BLDC motors, gears, and encoders) and four 6-axis force/torque sensors with 4Khz communication bandwidth, which is adequate for a multi body robot.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.147-155
• /
• 1996

There is a considerable interest in tunable DFB-LD for their use in OFDM and coherent optical communications. In this paper, A modeling of ${\lambda}/4$-shifted tunable wavelength three electrode DFB-LD was performed considering the spatial hole burning within a laser diode cavity. The modeling will show design paramenters' requirement for high-speed and broad bandwidth lasers. The simulations of modeling prove that the continuous tuning range is about 3nm and the SMSR is about several dB. We showed that the optical power and carrier density distribution along z for several dc current with SHB. It was shown that prove that optical power and carrier density along cavity are changed and thismeans that modeling is correct.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.343-344
• /
• 2009

Pump wavelength dependence of the gain spectra was investigated by simulating the model of single-pumped fiber optical parametric amplifiers (FOPAs). Conditions for the single-pumped FOPAs having broad bandwidths with relatively large gains were optimized and the gain bandwidth was found to be as large as 146.4 nm when signal power and pump power were 316 nW and 7 W, respectively.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.6
• /
• pp.78-85
• /
• 1980

A symmetrical 3-dB quadrature hybrid circuits, consisting mainly of bifilar pair of taitoted wires, is described. A cascade of two such hybrid circuits can achieve an octave bandwidth hybrid circuit with a small coupling loss. Since the proposed type is simple, compact, and low In cost 1 its applicarion may be preferred to the more common coaxial line or printed -circuit type hybrid version in the frequency region below 1 GHz. This study provides a design method for a hybrid circuit mixing two different antenna signals for the anti - ghosting of television signal.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.473-477
• /
• 2003

In this paper, a integrated structure of a two-element microstrip patch antenna with two feeds for GPS/PCS dual-band operation is proposed. The radiating element for PCS operation is a novel broad band low-profile cylindrical monopole top-loaded with a shorted meander patch, which gives linearly polarized conical radiation pattern and size reduction of patch due to meander line. The radiating element for GPS operation is a novel square-ring microstrip patch with truncated corners and slits. which provide circularly polarized broadside radiation patterns and size reduction due to slots. using dielectric substrate in GPS antenna of proposed antenna provide to improve isolation between two feeds and reduce size of patch. The proposed antenna achieves the bandwidth and polarization requirements of GPS and PCS systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.443-447
• /
• 2001

The PLL synthesizer is used often in communication system due to several merits, such as broad bandwidth, high accuracy and stability of frequency. But it is difficult to use in torrent digital communication systems that need frequency hopping at a high speed because of its long frequency hopping time. In this paper, we designed frequency synthesizer that generate the clock frequency randomly at a high speed using the DDS technology and is applied to the pattern generator system for digital image.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2011

In this letter, we propose a novel tag antenna that has low performance degradation with nearby dielectric material. We obtained a stable reading performance and a broad matching bandwidth on nearby dielectric materials by employing a T-matching network with thick line width and capacitively slot-loaded arms. We then built the proposed antenna and measured the tag sensitivity to examine the reading characteristics with nearby dielectric materials. The measured results clearly demonstrate stable tag sensitivity with various nearby dielectric materials, such as foam, acrylic-plastic, glass, and ceramic plates. To more closely observe the antenna characteristics with nearby dielectric materials, we also examined the impedance variation and surface current distribution with respect to the dielectric constant of nearby target objects, which ranged from $1{\times}{\varepsilon}_0$ to $16{\times}{\varepsilon}_0$.

• Journal of Navigation and Port Research
• /
• v.30 no.7
• /
• pp.607-610
• /
• 2006

A new compact microstrip low-pass filter and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.158-165
• /
• 2009

We present cross-correlation frequency-resolved optical gating (XFROG) measurements of supercontinuum pulses generated by using a photonic crystal fiber (PCF), and ultraviolet (UV) pulses generated by frequency doubling of infrared ultra-short pulses. Since supercontinuum pulses have broad spectra, XFROG measurement typically requires using an extremely thin nonlinear crystal which has a thickness of sub-ten microns. Instead of using such a thin crystal, we employed a relatively thick crystal which was mounted on a galvanometer in order to achieve a phase-matching over the whole spectral bandwidth of the supercontinuum pulses by a crystal-dithering technique. Experimental results of the retrieved phase and intensity were in fair agreement with the independently measured data.