• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1598-1604
• /
• 2015

In this paper, we treat the problem of a robust finite-time dissipative state feedback controller design method for discrete-time singular systems with polytopic uncertainties. A BRL(bounded real lemma) for finite-time stability of discrete-time singular systems is derived. A finite-time dissipative state feedback controller design method satisfying finite-time stability and dissipativity is proposed by LMI(linear matrix inequality) technique on the basis of the obtained BRL. Moreover it is shown that the obtained condition can be extended into polytopic uncertain systems by proper manipulations. Finally, illustrative examples are given to show the applicability of the proposed method.

• Journal of Microbiology
• /
• v.40 no.3
• /
• pp.230-233
• /
• 2002

Effects of short-chain primary amines on Aspergillus nidulans development were analyzed. Propylamine induced asexual development and inhibited sexual development. Even on medium containing lactose as the sole carbon source, on which little conidial heads are formed and sexual structures are formed preferentially, or when sexual development was induced, propylamine induced asexual development and inhibited sexual development. These effects of propylamine seemed to be due to accumulation of mRNA of the brlA gene, which has been identified as a positive regulator of asexual development, and due to the reduction of the veA mRNA level. The veA gene has been identified as an activator of sexual development and also as an inhibitor of asexual development. Other primary amines, methylamine and ethylamine, showed identical effects on development where short-chain primary amino also promoted asexual development and inhibited sexual development.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.516-523
• /
• 2006

Marginal soils such as BRlS (Beach Ridges Interspersed with Swales) soils and ex-tin mining land make up approximately 0.5 million ha or about 2% of Malaysia's land area. In the coastal areas of the east coast of Peninsular Malaysia impoverished sandy BRIS dominates the landscape with most lying idle as there is no national management plan for their utilization. A field study was carried out to see whether mycorrhizal application had any effect on the growth of three exotic Acacia spp., i.e. Acacia auriculiformis, A. mangium and Acacia hybrid (A. auriculiformis ${\times}$ A. mangium) on BRIS soils. Two types of mycorrhizal inoculum, namely, a commercially available arbuscular mycorrhizal inoculum marketed as $MycoGold^{TM}$ and an indigenous ectomycorrhizal Tomentella sp. inoculum were tested. In the initial six months, height growth of all three tree species inoculated with the arbuscular mycorrhizal inoculum was significantly improved compared to the ectomycorrhizal inoculated and uninoculated control plants. The mycorrhizal effect was not evident thereafter and repeated application of the arbuscular mycorrhizal inoculum may be necessary for continued growth enhancement. Of the three species, A. mangium had the highest relative height growth rate over the 24 months on BRlS soils.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.59-65
• /
• 2011

In this paper, we present a reduced-order parameter-dependent robust $H_{\infty}$ filter design method for discrete-time singular systems with polytopic uncertainties. A BRL(bounded real lemma) for parameter-dependent singular systems is derived from a parameter-dependent Lyapunov function. On the basis of the obtained BRL, low order robust $H_{\infty}$ filter design method is presented by polytopic approach, new reduced-order method, and LMI(linear matrix inequality) technique. Finally, a numerical example is presented to illustrated the feasibility of the proposed method.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.15-15
• /
• 2014

Fusarium graminearum (teleomorph Gibberella zeae) is an important plant pathogen that causes head blight of major cereal crops such as wheat, barley, and rice, as well as causing ear and stalk rot on maize worldwide. Plant diseases caused by this fungus lead to severe yield losses and accumulation of harmful mycotoxins in infected cereals [1]. Fungi utilize spore production as a mean to rapidly avoid unfavorable environmental conditions and to amplify their population. Spores are produced sexually and asexually and their production is precisely controlled. Upstream developmental activators consist of fluffy genes have been known to orchestrate early induction of condiogenesis in a model filamentous fungus Aspergillus nidulans. To understand the molecular mechanisms underlying conidiogenesis in F. graminearum, we characterized functions of the F. graminearum fluffy gene homologs [2]. We found that FlbD is conserved regulatory function for conidiogenesis in both A. nidulans and F. graminearum among five fluffy gene homologs. flbD deletion abolished conidia and perithecia production, suggesting that FlbD have global roles in hyphal differentiation processes in F. graminearum. We further identified and functionally characterized the ortholog of AbaA, which is involved in differentiation from vegetative hyphae to conidia and known to be absent in F. graminearum [3]. Deletion of abaA did not affect vegetative growth, sexual development, or virulence, but conidium production was completely abolished and thin hyphae grew from abnormally shaped phialides in abaA deletion mutants. Overexpression of abaA resulted in pleiotropic defects such as impaired sexual and asexual development, retarded conidium germination, and reduced trichothecene production. AbaA localized to the nuclei of phialides and terminal cells of mature conidia. Successful interspecies complementation using A. nidulans AbaA and the conserved AbaA-WetA pathway demonstrated that the molecular mechanisms responsible for AbaA activity are conserved in F. graminearum as they are in A. nidulans. F. graminearum ortholog of Aspergillus nidulans wetA has been shown to be involved in conidiogenesis and conidium maturation [4]. Deletion of F. graminearum wetA did not alter mycelial growth, sexual development, or virulence, but the wetA deletion mutants produced longer conidia with fewer septa, and the conidia were sensitive to acute stresses, such as oxidative stress and heat stress. Furthermore, the survival rate of aged conidia from the F. graminearum wetA deletion mutants was reduced. The wetA deletion resulted in vigorous generation of single-celled conidia through autophagy-dependent microcycle conidiation, indicating that WetA functions to maintain conidia dormancy by suppressing microcycle conidiation in F. graminearum. In A. nidulans, FlbB physically interacts with FlbD and FlbE, and the resulting FlbB/FlbE and FlbB/FlbD complexes induce the expression of flbD and brlA, respectively. BrlA is an activator of the AbaA-WetA pathway. AbaA and WetA are required for phialide formation and conidia maturation, respectively [5]. In F. graminearum, the AbaA-WetA pathway is similar to that of A. nidulans, except a brlA ortholog does not exist. Amongst the fluffy genes, only fgflbD has a conserved role for regulation of the AbaA-WetA pathway.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1253-1253
• /
• 2001

The ability to accurately assess wine quality is important during the wine making process, particularly when allocating batches of wines to styles determined by consumer requirements. Grape payments are often determined by the quality category of the wine that is produced from them. Wine quality, in terms of sensory characteristics, is normally a subjective measure, performed by experienced winemakers, wine competition judges or winetasting panellists. By nature, such assessments can be biased by individual preferences and may be subject to day-to-day variation. Taste and aroma compounds are often present in concentrations below the detection limit of near infrared (NIR) spectroscopy but the more abundant organic compounds offer potential for objective quality grading by this technique. Samples were drawn from one of Australia's major wine shows and from BRL Hardy's post-vintage wine quality allocation tastings. The samples were scanned in transmission mode with a FOSS NIR Systems 6500, over the wavelength range 400-2500 ㎚. Data analysis was performed with the Vision chemometrics package. With samples from the allocation tastings, the best correlations between NIR spectra and tasting data were obtained with dry red wines. These calibrations used loadings in the wavelengths related to anthocyanins, ethanol and possibly tannins. Anthocyanins are a group of compounds responsible for colour in red wines - restricting the wavelengths to those relating to anthocyanins produced calibrations of similar accuracy to those using the full wavelength range. This was particularly marked with Merlot, a variety that tends to have relatively lower anthocyanin levels than Cabernet Sauvignon and Shiraz. For dry white wines, calibrations appeared to be more dependent on ethanol characteristics of the spectrum, implying that quality correlated with fruit maturity. The correlations between NIR spectra and sensory data obtained using the wine show samples were less significant in general. This may be related to the fact that within most classes in the show, the samples may span vintages, glowing areas and winemaking styles, even though they may be made from only one grape variety. For dry red wines, the best calibrations were obtained with a class of Pinot Noir - a variety that tends to be produced in limited areas in Australia and would represent the least matrix variation. Good correlations were obtained with a tawny port class - these wines are sweet, fortified wines, that are aged for long periods in wooden barrels. During the ageing process Maillard browning compounds are formed and the water is lost through the barrels in preference to ethanol, producing “concentrated” darkly coloured wines with high alcohol content. These calibrations indicated heaviest loadings in the water regions of the spectrum, suggesting that “concentration” of the wines was important, whilst the visible and alcohol regions of the spectrum also featured as important factors. NIR calibrations based on sensory scores will always be difficult to obtain due to variation between individual winetasters. Nevertheless, these results warrant further investigation and may provide valuable Insight into the main parameters affecting wine quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.485-492
• /
• 1990

This paper propose a optimal design method for robust notion controllers of under-water vehicles using the combined technique between classical and modern theories. The proposed method is presented which utilizes classical control methods to obtain a good robustness and modern control methods to set optimal gains. LQ, SVD, multivariable frequency analysis and Bode-Root Locus (BRL) plot are used.

• 한국균학회소식:학술대회논문집
• /
• 2015.11a
• /
• pp.28-28
• /
• 2015

Asexual reproduction or conidiation in aspergilli is a primary mean to produce their progenies that is environmentally and genetically controlled tightly. Previously, intensive researches in the model fungus Aspergillus nidulans disclosed some genes playing important roles in asexual and sexual development. Among them, one gene encoding a putative helix-loop-helix (HLH) transcription factor, named ndrA, has been isolated and characterized as a downstream regulator of developmental master regulator NsdD. By using comparative genome search of A. niduans NdrA protein, its orthologues have been identified in A. fumigatus and A. flavus, respectively (AfudrnA and AfldrnA). Deletion of the ndrA genes in both Aspergillus species made them unable to produce the conidia yet abundant production of sclerotia in A. flavus. Complementation of ndrA deletion strains by intact ndrA ORFs has restored the conidiation as in the control strains. In A. fumigatus, ndrA deletion also resulted in loss of conidiation phenotype. Northern analyses showed that the ndrA genes in both Aspergillus species are highly expressed at the early stage of the conidiation. Interestingly, the ndrA genes were found to be necessary for the proper expression of brlA genes. Antifungal sensitivity test revealed that the ndrA genes might be responsible for the sensitivity or resistance to some antifungal agents. However, ndrA deletion did not greatly influence the growth in both strains. And the A. flavus ndrA gene did not affect the aflatoxin production. Taken together, ndrA genes in Aspergillus species could be an important positive regulator of conidiation under the regulation of the nsdD gene yet upstream of the brlA gene.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.139-143
• /
• 2017

N-type crystalline silicon solar cells have high metal impurity tolerance and higher minority carrier lifetime that increases conversion efficiency. However, junction quality between the boron diffused layer and the n-type substrate is more important for increased efficiency. In this paper, the current status and prospects for boron diffused layers in N-type crystalline silicon solar cell applications are described. Boron diffused layer formation methods (thermal diffusion and co-diffusion using $a-SiO_X:B$), boron rich layer (BRL) and boron silicate glass (BSG) reactions, and analysis of the effects to improve junction characteristics are discussed. In-situ oxidation is performed to remove the boron rich layer. The oxidation process after diffusion shows a lower B-O peak than before the Oxidation process was changed into $SiO_2$ phase by FTIR and BRL. The $a-SiO_X:B$ layer is deposited by PECVD using $SiH_4$, $B_2H_6$, $H_2$, $CO_2$ gases in N-type wafer and annealed by thermal tube furnace for performing the P+ layer. MCLT (minority carrier lifetime) is improved by increasing $SiH_4$ and $B_2H_6$. When $a-SiO_X:B$ is removed, the Si-O peak decreases and the B-H peak declines a little, but MCLT is improved by hydrogen passivated inactive boron atoms. In this paper, we focused on the boron emitter for N-type crystalline solar cells.