• 콘크리트학회지
• /
• 제6권3호
• /
• pp.152-161
• /
• 1994

교량의 확폭공사에는 대개 기설부와 교량을일체화시키는 접합시공법이 행해지고 있다. 그러나 접합시공방법은 설계 및 시공상 여러 가지 복합적인 문제를 야기시킨다. 본 연구는 실험 및 구조해석을 통하여 접합시공에 따른 제반 문제점중 확폭교량 시공방법에 따른 구조거동과 콘크리트 양생시 기설부 교량을 통과하는 차량에 의해 발생하는 진동이 신설부 교량에 미치는 영향을 조사하고자 실시하였다. 연구결과, 낮은 하중에서 접합면에 휨균열이 발생하였고, 접합부 철근에서 약간의 응력집중현상 및 철근과 콘크리트간에 슬립현상이 관찰되었으나, 접합시공에 따른 전체적인 강도의 감소는 미소하였다. 또한, 신설부 교량의 콘크리트 양생중 진동에 의한 강도의 감소는 없음을 알 수 있었다.

• 한국강구조학회 논문집
• /
• 제14권2호
• /
• pp.365-373
• /
• 2002

이 논문에서는 교량의 수명을 예측하기 위한 시스템 신뢰성 이론이 설명되고, 생애 분포 함수를 이용하여 현존하는 교량의 잔존 수명을 예측하는 방법이 설명된다. 시스템 이론과 생애함수 (survivor functions) 를 이용하여 LIFETIME 이라는 프로그램을 개발하였다. Survivor functions은 주어진 시간 t에 대해 신뢰성을 산출한다. 이 프로그램을 이용하여 콜로라도주에 있는 교량의 수명을 예측하였다. 이 교량은 직렬과 병렬로 구성된 시스템으로 컴퓨터 모델링 되었으며 이 모델을 이용하여 시스템 파괴 확률을 시간에 대해 계산하였다.

• 한국안전학회지
• /
• 제21권2호
• /
• pp.98-106
• /
• 2006

The substructure of temporary bridges used during the construction period of main bridges needs to be simple and strong at the same time so that it doesn't block running water. When the water flow is hindered by sub-structure of the bridges, as it happens when H beams with bracing are used, either the water floods or the bridge gets damaged. Therefore, using round beams for the substructure and connect them together is a preventive choice considering the intensive raining in the summer. The bridges using round beams for the substructure have also benefited by fast construction because of fewer bracing and in-situ welding. Because the round-pile-connecting method is relatively new, the safety evaluation of the constructed bridge is an essential procedure before being used in the field. The field evaluation of a bridge including the vehicle loading test and moving load analysis has been conducted and the results showed the safety requirement is satisfied.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.203-210
• /
• 1995

A construction method for continuous prestressed Composite Bridges(PCB's) is developed and successfully applied to the design of two-span continuous PCB's of five different span lengths. The construction of continuous PCB's goes through 17 different loading conditions. for each loading condition, the allowable stress design method is used to determine section properties. The analytical results of two-span continuous PCB's arc compared with those of simple PCB's. The comparison shows that the use of the proposed method can reduce 10-15 percents of the concrete section area and approximate 28 percents of the steel section area, as well as 5-8 percents of the girder height. The study indicates that the use of the proposed PCB's method can significantly reduce construction and maintenance costs of bridges.

• 한국강구조학회 논문집
• /
• 제14권3호
• /
• pp.443-452
• /
• 2002

고속도로 건설은 여러 국가에서 거의 완료되었으며, 정부나 고속도로 관계기관은 유지관리쪽에 초점을 맞추고 있다. 교량을 효과적으로 유지관리하기 위해, 시스템 신뢰성을 이용한 교량의 잔존수명을 예측하는 것은 매우 시급하다. 그리고 시스템 신뢰성을 이용한 교량의 유지관리 모델을 개발하는 것은 필수적이다. 이 논문에서는 시스템 신뢰성과 라이프 타임 분포를 이용하여 예방 유지관리(Preventive Maintenance)와 사후 유지관리(Essential Maintenance) 모델을 개발하였다.

• 한국강구조학회 논문집
• /
• 제14권5호통권60호
• /
• pp.627-639
• /
• 2002

교량의 건설은 여러 국가에서 거의 완료되었으며, 정부나 고속도로 관계기관은 유지관리쪽에 초점을 맞추고 있다. 교량을 효과적으로 유지관리하기 위해, 시스템 신뢰성을 이용한 교량의 잔존수명을 예측하는 것은 매우 시급하다. 그리고 시스템 신뢰성을 이용한 교량의 유지관리 모델을 개발하는 것은 필수적이다. 이 논문에서는 시스템 신뢰성과 생애함수를 이용하여 예방 (Preventive) 유지관리 와 사후 (Essential) 유지관리 모델을 개발하였다. 이 논문에서 개발된 유지관리 모델을 이용해서 현존하는 교량에 대해 최적의 유지관리 계획을 구하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.103-111
• /
• 2002

The objective of this study is to collect and classify bridge failures that occurred in domestic from 1974 through 2001 and to draw the engineering informations by analyzing the principal causes and the trends of the bridge failures. Total 45 failures of bridge were obtained and analyzed based on the factors such as time of failures, modes of failures, classification of materials of failed elements, types of failed elements, distribution of failure cases with respect to the highway grades. The critical problems of bridge failures are associated with the construction deficiencies, external causes, maintenance deficiencies, and design deficiencies. Since the study of failures in bridges would enhance the design and construction of safe bridges in the future, it would be needed to create data bases at the national level and to alter the related codes with identifying potential deficiencies from past failures data.

• Structural Engineering and Mechanics
• /
• 제42권1호
• /
• pp.55-72
• /
• 2012

Precast-cast insitu concrete bridge construction is widely practiced for small to medium span structures. These bridges consist of precast pre-stressed concrete beams of various cross-sections with a cast in-situ reinforced concrete slab. The connection between the beams and the slab is via shear links often included during the manufacturing process of the beams. This form of construction is attractive as it provides for standardisation, reduced formwork and construction time. The assessment of the integrity of shear connectors in existing bridges is a major challenge. A procedure for assessment of shear connectors based on vibration testing and finite element model updating is proposed. The technique is applied successfully to a scaled model bridge model and an existing bridge structure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.105-110
• /
• 1990

Effective maintenance system for national highway bridges has been requested due to increasing numbers of bridges. In this study, bridge data base is established in accordance with rating criteria for the structural conditions and functions of bridges. Maintenance system using PC-80386 hardware and ORACLE software is developed to rank the priority of either reconstruction or repairing of bridges and to provide with those information to bridge maintenance staff in order to perform bridge maintenance effectively. With this pre-establised data base and computerized maintenance system, data and information for planning of bridge construction could be obtained in times.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.94-100
• /
• 2003

Generally, cable-stayed bridges are both statically indeterminate structure with a high degree of redundancy and flexible structure. So it is very important to ensure precision control during both fabrication and construction. In precision control of cable-stayed bridges, precision control under multi-objective programming method is needed, because precision control problem of cable-stayed bridges is a multi-objective programming problem in which many objective functions are regard as variables. In previous studies, it was regarded as a single-objective problem, so it had many problems in respect of usefulness and rationalness. In this study, precision control under multi-objective programming method is proposed considering economy, efficiency, and safety at best in precision control of cable-stayed bridges. Precision control problem of cable-stayed bridges is formulated with satisfying trade-off method which is a kind of multi-objective programming method, then it is optimized with min-max method. A computer program is presented including above process.