• 제목/요약/키워드: bridge rating

검색결과 131건 처리시간 0.021초

딥러닝 모형을 이용한 팔당대교 지점에서의 유량 예측 (Flow rate prediction at Paldang Bridge using deep learning models)

  • 성연정;박기두;정영훈
    • 한국수자원학회논문집
    • /
    • 제55권8호
    • /
    • pp.565-575
    • /
    • 2022
  • 최근의 수자원공학 분야는 4차산업혁명과 더불어 비약적으로 발전된 딥러닝 기술을 활용한 시계열 수위 및 유량의 예측에 대한 관심이 높아지고 있다. 또한 시계열 자료의 예측이 가능한 LSTM 모형과 GRU 모형을 활용하여 수위 및 유량 예측을 수행하고 있지만 시간 변동성이 매우 큰 하천에서의 유량 예측 정확도는 수위 예측 정확도에 비해 낮게 예측되는 경향이 있다. 본 연구에서는 유량변동이 크고 하구에서의 조석의 영향이 거의 없는 한강의 팔당대교 관측소를 선택하였다. 또한, LSTM 모형과 GRU 모형의 입력 및 예측 자료로 활용될 유량변동이 큰 시계열 자료를 선택하였고 총 자료의 길이는 비교적 짧은 2년 7개월의 수위 자료 및 유량 자료를 수집하였다. 시간변동성이 큰 시계열 수위를 2개의 모형에서 학습할 경우, 2개의 모형 모두에서 예측되는 수위 결과는 관측 수위와 비교하여 적정한 정확도가 확보되었으나 변동성이 큰 유량 자료를 2개의 모형에서 직접 학습시킬 경우, 예측되는 유량 자료의 정확도는 악화되었다. 따라서, 본 연구에서는 급변하는 유량을 정확히 예측하기 위하여 2개 모형으로 예측된 수위 자료를 수위-유량관계곡선의 입력자료로 활용하여 유량의 예측 정확도를 크게 향상시킬 수 있었다. 마지막으로 본 연구성과는 수문자료의 별도 가공없이 관측 길이가 상대적으로 충분히 길지 않고 유출량이 급변하는 도시하천에서의 홍수예경보 자료로 충분히 활용할 수 있을 것으로 기대된다.

Input-Series-Output-Parallel Connected DC/DC Converter for a Photovoltaic PCS with High Efficiency under a Wide Load Range

  • Lee, Jong-Pil;Min, Byung-Duk;Kim, Tae-Jin;Yoo, Dong-Wook;Yoo, Ji-Yoon
    • Journal of Power Electronics
    • /
    • 제10권1호
    • /
    • pp.9-13
    • /
    • 2010
  • This paper proposes an input-series-output-parallel connected ZVS full bridge converter with interleaved control for photovoltaic power conditioning systems (PV PCS). The input-series connection enables a fully modular power-system architecture, where low voltage and standard power modules can be connected in any combination at the input and/or at the output, to realize any given specifications. Further, the input-series connection enables the use of low-voltage MOSFETs that are optimized for a very low RDSON, thus, resulting in lower conduction losses. The system costs decrease due to the reduced current, and the volumes of the output filters due to the interleaving technique. A topology for a photovoltaic (PV) dc/dc converter that can dramatically reduce the power rating and increase the efficiency of a PV system by analyzing the PV module characteristics is proposed. The control scheme, consisting of an output voltage loop, a current loop and input voltage balancing loops, is proposed to achieve input voltage sharing and output current sharing. The total PV system is implemented for a 10-kW PV power conditioning system (PCS). This system has a dc/dc converter with a 3.6-kW power rating. It is only one-third of the total PV PCS power. A 3.6-kW prototype PV dc/dc converter is introduced to experimentally verify the proposed topology. In addition, experimental results show that the proposed topology exhibits good performance.

의사정적재하시험 응답보정계수에 의한 교량 해석모델 보정의 타당성 분석 (Feasibility Analysis of the Bridge Analytical Model Calibration with the Response Correction Factor Obtained from the Pseudo-Static Load Test)

  • 한만석;신수봉
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권6호
    • /
    • pp.50-59
    • /
    • 2021
  • 현재 공용중인 교량에 대한 재하시험으로 계측한 응답과 초기해석모델의 해석 응답을 비교하여 응답보정계수를 계산하고, 이 모델을 사용하여 내하율과 내하력을 평가하는 방법을 적용하고 있다. 그러나 이러한 응답보정계수는 계측 위치와 하중 조건에 따라 변동하는 값을 준다. 특히 초기해석모델이 교량의 거동에 합당하지 않은 경우, 그 변동 폭이 크며 보정된 모델에 의한 해석 응답이 계측된 응답과 동떨어진 결과를 줄 수 있다. 본 연구에서는 저속으로 주행하는 차량의 다양한 하중 조건에서 동적 성분을 제거한 정적 응답을 얻기 위해 의사정적재하시험법을 적용하였다. 두 개의 유사한 PSC-I 거더교에서 정적 응답을 계측하고, 두 교량 각각에 대한 변위와 변형률에 대한 응답보정계수를 계산하였다. 초기해석모델이 제대로 설정되어 있지 않다면, 평균적으로 구한 응답보정계수로 보정한 모델의 해석 응답이 계측 응답과 오차범위 내에 들어오는지 않음을 확인하였다.

대형교량의 유지관리를 위한 전산화 모니터링 및 분석평가시스템 (Computer-Aided Monitoring and Assessment System for Maintenance of Grand Bridges)

  • 조효남;임종권;민대홍;박경훈
    • 한국강구조학회 논문집
    • /
    • 제10권3호통권36호
    • /
    • pp.369-381
    • /
    • 1998
  • 본 연구에서는 대형교량의 전산화 모니터링 및 분석평가(Monitoring and Assessment: M&A)를 위한 시스템모형과 소프트웨어의 개발에 대한 새로운 접근방법과 개념을 제안하였다. 제안된 시스템모형은 대형교량의 M&A를 위한 최적의 방법을 반영한 모형이다. 이를 위하여 교량의 확률적 분석평가를 위한 신뢰성 모형이 개발되었고, 일련의 현장재하시험으로부터 계측된 실응답에 기초한 교량의 안전성과 신뢰성의 평가를 위해 신뢰성에 기초한 내하력 평가방법을 확립하였다. 또한 제안된 모델에 기초하여 대형교량의 전산화 M&A를 위한 시범소프트웨어(prototype software)를 개발하여 실제 사장교에 적용하였다. 본 연구에서 개발된 시스템모형 및 시범소프트웨어는 향후 사장교나 현수교와 같은 장대교량의 전산화 유지관리 시스템의 개발에 활용될 수 있다.

  • PDF

강도로교의 피로신뢰성 해석을 위한 실용적 모형 (A Practical Model for the Fatigue Reliability Analysis of Steel Highway Bridges)

  • 신재철;장동일;이성재;조효남
    • 전산구조공학
    • /
    • 제1권1호
    • /
    • pp.113-122
    • /
    • 1988
  • 본 연구에서는 강도로교의 피로파손의 위험을 예측할 수 있는 실용적 모형을 개발하였다. 제안된 피로해석 모형은 피로신뢰성 이론과 교량의 피로수명에 영향을 미치는 여러가지 요인들을 고려하여 유도되었다. 피로신뢰성 함수는 Weibull분포로 가정하였고, Weibull의 수치계산형태는 강재의 피로수명과 변진폭재하로 인한 응력범위 등의 통계적 불확실량을 모두 포함하는 Ang-Munse의 식을 사용하였다. 피로해석모형에는 교량이용 기간중에 발생할 수 있는 일평균교통량(ADTT)의 변화, 재하이력의 변화, 진추조사의 효과 등을 고려하였다. 응력범위 주상도는 개설 교량에 대한 현장실측결과로부터 구한 랜던 응력파로부터 작도하고, 그 결과 구해지는 응력범위분포는 Beta분포로 모형화 하였다. 본 연구에서 제안한 피로해석 방법을 실제 개설 교량에 대해 적용한 결과, 제안된 피로해석모형과 수치계산을 위하여 개발된 전산프로그램은 기설 노후 강교의 피로 내하력 판정이나 잔존수명의 예측 등을 위한 실용적인 방법으로 사용될 수 있다고 생각된다.

  • PDF

25kV 전기철도 고조파 보상을 위한 고전력 능동전력필터 시스템에 관한 연구 (The High Power Active Filter System for Harmonic Compensation of 25kv Electric Railway)

  • 김재철;노성찬;이유경
    • 한국철도학회논문집
    • /
    • 제9권6호
    • /
    • pp.761-765
    • /
    • 2006
  • At present, harmonic currents cause serious problems in power conversion system using the semiconductor switching device. Also some of the conversion system provokes harmonic currents against to the main power supply system and causes hindrances for the system. Main power impedance of the traditional LC passive filter method, influences on the filter characteristics and amplifies the harmonics when resonance phenomenon is occurred. And the traditional existing 2 level inverter systems show the limit in capacity of voltage and current in case of occurring sudden load change. So, to solve this problem active filter which uses cascaded H-bridge multi level inverter has been designed and ex-filter system circuits were totally investigated. With multi level active filtering system not only the size of filter but also the size of filter for transformer can be reduced by half and so as to the weight, while the capacity of inverter can be double sized and wave forms can be compensated exactly and precisely. Also by the benefit of the increase in rating capacity, the various currents owing to the load fluctuation can be dealt more steadily. In order to simulate the wave form of harmonics based on the measured data on the AC 25kV high speed Domestic Commercial railway, it was simulated with PSCAD/EMTDC and PSIM. Based on the results of this demonstration, the power supply system and inverter system would be more stable and also promoting its efficiency.

시험유역 운영을 통한 강우-유출수의 비점오염물질 유출특성 분석 (Assessment of the Wetland Soil Development of Constructed Wetlands using Soil Properties of a Reference Wetland)

  • 이주헌;김창주;박민재;신정수;장호원
    • 한국습지학회지
    • /
    • 제14권2호
    • /
    • pp.181-192
    • /
    • 2012
  • 대동천 유역은 2007년부터 UNESCO IHP(International Hydrologic Programme)의 대표시험 유역으로 선정되어 운영되고 있다. 대동천은 대전광역시에 위치하고 있으며 도시/방재 시험유역으로서의 모니터링 계획이 수립되어 강수량, 유출량 및 수질 등과 같은 수문 기초자료를 수집하여 제공하고 있다. 본 연구에서는 2011년도에 측정된 유량 및 수질관측 자료를 활용하여 도시하천 유역에서의 강우-유출수 비점오염물질에 대한 유출특성을 분석하였다. 시험유역 운영결과로서 판암교 지점과 철갑교 지점의 수위-유량관계곡선을 작성 하였으며, 강우량에 따른 비점오염원의 유출특성을 비교하기 위하여 10개의 수질항목에 대한 유량가중평균농도(EMC)를 산정하여, 강우량, 선행강우량 및 토지이용 상태에 따른 관측지점별 비점오염원의 유출특성에 대해 분석 하였다.

WASP5 모형을 적용한 복하천의 수질 예측 (Water Quality Modeling for Bokha Stream by WASP5 Model)

  • 신동석;권순국
    • 한국환경농학회지
    • /
    • 제16권3호
    • /
    • pp.233-238
    • /
    • 1997
  • 하천 수질예측 모형으로서 WASP5 모형을 선정하고, 복하천에 적용한 결과 다음과 같은 결과를 얻었다. 1. 년평균 유달율을 적용한 결과, 실측치와 계산치 사이에 큰 차이가 나타내므로 시간을 고려한 동적모의발생을 위해서는 계절에 따른 유달율의 변화를 반영하여야 할 것이다. 2. 월별 유달율을 고려한 부하량을 입력하여 계산한 결과, 실측치와 계산치가 거의 일치하므로 유역으로부터의 부하량을 이용한 하천수질 예측모형으로서 WASP5 모형의 활용이 기대된다. 3. GIS를 이용한 부하량 산정, 유역의 최적관리(BMP's)를 통한 발생량 저감, 처리장의 신${\cdot}$증설 등 경계조건이 변동된 경우, 본 WASP5모형에 시기별 유달율을 고려한 자료가 입력된다면 하천수질농도의 예측이나 수질개선효과의 파악이 용이할 것으로 판단된다.

  • PDF

Parallel Operation of Microgrid Inverters Based on Adaptive Sliding-Mode and Wireless Load-Sharing Controls

  • Zhang, Qinjin;Liu, Yancheng;Wang, Chuan;Wang, Ning
    • Journal of Power Electronics
    • /
    • 제15권3호
    • /
    • pp.741-752
    • /
    • 2015
  • This study proposes a new solution for the parallel operation of microgrid inverters in terms of circuit topology and control structure. A combined three-phase four-wire inverter composed of three single-phase full-bridge circuits is adopted. Moreover, the control structure is based on adaptive three-order sliding-mode control and wireless load-sharing control. The significant contributions are as follows. 1) Adaptive sliding-mode control performance in inner voltage loop can effectively reject both voltage and load disturbances. 2) Virtual resistive-output-impedance loop is applied in intermediate loop to achieve excellent power-sharing accuracy, and load power can be shared proportionally to the power rating of the inverter when loads are unbalanced or nonlinear. 3) Transient droop terms are added to the conventional power outer loop to improve dynamic response and disturbance rejection performance. Finally, theoretical analysis and test results are presented to validate the effectiveness of the proposed control scheme.

A New 12-Pulse Diode Rectifier System With Low kVA Components For Clean Power Utility Interface

  • 이방섭
    • 전력전자학회논문지
    • /
    • 제4권5호
    • /
    • pp.423-432
    • /
    • 1999
  • This paper proposes a 12­pulse diode rectifier system with low kVA components suitable for powering switch mode power supplies or ac/dc converter applications. The proposed 12-pulse system employs a polyphase transformer, a zero sequence blocking transformer (ZSBT) in the dc link, and an interphase transformer. Results produce near equal leakage inductance in series with each diode rectifier bridge ensuring equal current sharing and performance improvements, The utility input currents and the voltage across the ZSBT are analyzed the kVA rating of each component in the proposed system is computed. The 5th , 7th , 17th and 19th harmonics are eliminated in the input line currents resulting in clean input power. The dc link voltage magnitude generated by the proposed rectifier system is nearly identical to a conventional to a conventional 6-pulse system. The proposed system is suitable to retrofit applications as well as in new PWM drive systems. Simulation and experimental results from a 208V , 10kVA system are shown.

  • PDF