• Structural Engineering and Mechanics
• /
• 제30권5호
• /
• pp.559-576
• /
• 2008

Having established the initial geometry and cable force of a typical three span suspension bridge under permanent load, the additional maximum response of the cable and the stiffening girder due to live load are determined, by means of an analytic procedure, considering the girder first hinged at its ends and then continuous through the main towers. The problem of interaction between the cable and the stiffening girder is examined taking under due consideration the second order effects, whereby, through the analogy to a fictitious tensioned beam under transverse load, a closed -form solution is achieved by means of a simple quadratic equation. It is found that the behavior of the whole system is governed by five simple dimensionless parameters which enable a quick determination of all the relevant design magnitudes of the bridge. Moreover, by introducing these parameters, a set of diagrams is presented, which enable the estimation of the influence of the geometric and loading data on the response and permit its immediate evaluation for preliminary design purposes.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.391-396
• /
• 2014

For the purpose of finding out the acoustical characteristics of exterior materials in bridge, analytical studies are performed with boundary elements method by using the commercial program SYSNOISE. Before analysis, to figure out material property, it was conducted experiments of absorption coefficient for absorptive material. And prediction of pressure were conducted I GIRDER type (before & after installation of absorption panel ) and BOX GIRDER type (before & after installation of absorption panel) The results show that when the absorption panel is installed, environment around bridge can help reduce traffic noise. It was proved to be the effective noise reduction counter-plan for a traffic noise in the bridges.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.434-441
• /
• 1999

The newly proposed Precast Segmental Mettled (PSM), which makes use of precast elements for election, is relatively new, efficient and fast mettled for the construction of prestressed box girder bridges. A precast segment of 25m long pretensioned in the fabrication yard is transported by a special trailer and a launching truss to its final position. The segments are then connected in the site by post-tensioning to make a continuous prestressed concrete box girder bridges. The purpose of this parer is to analyze and evaluate the design of precast prestressed concrete box girder bridges. The detailed analyses including time-dependent behavior of PSM bridges are conducted. The major results and findings, which have been obtained from finite element analysis of PSM bridge, are discussed in this paper and these results will be a good base for the design and analysis of a new precast bridges.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.17-22
• /
• 2000

This Paper deals with the analysis of both unstrengthened and strengthened prestressed concrete girder bridges. Finite element method is utilized to perform the analysis of superstructures. Based on the grillage method of analysis. emphasis is Placed on the modeling techniques for structures. The conventional grillage method of analysis is modif'=ed so that the interaction between the slab and gilder behaviors can be taken into account in the analysis A Prototype of simply supported prestressed I-type girder bridge is selected for the analysis. The results of numerical analyses are compared with those of load test. The results of analysis indicate that the proposed method of analysis gives more realistic response of bridges than the conventional grillage method.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.221-228
• /
• 2011

강 판형교는 높은 세장비 때문에 좌굴이 설계의 주요 변수이다. 본 연구의 목적은 I 형 플레이트 거더와 파형 복부판을 갖는 플레이트 거더의 좌굴거동을 분석하고, 파형 복부판을 갖는 플레이트 거더의 이점을 조사하는 것이다. 파형 복부판 깊이의 변화, 복부판의 두께 변화 그리고 하중조건의 변화에 따라 다양한 파라미터 연구를 수행하였다. 연구의 결과로서 파형 복부판을 갖는 플레이트 거더의 좌굴강도가 I 형 플레이트 거더에 비해서 좌굴강도에 있어서 46%~417% 더 효과적이며, 파형 복부판을 갖는 플레이트 거더의 적절한 파형각도는 ${\theta}=15^{\circ}{\sim}22^{\circ}$로 나타났다.

• 한국강구조학회 논문집
• /
• 제15권3호
• /
• pp.321-329
• /
• 2003

본 연구는 일반 강합성 교량에 프리스트레스를 도입하는 연구로서, 바닥판 콘크리트의 단면을 유효하게 사용하기 위한 해석 및 실험적 연구를 수행하였다. 해석적 연구를 통해서 프리스트레스 도입 방법을 결정하였고, 실험적 연구를 통해서 프리스트레스를 도입한 강합성형 교량의 교축 방향의 거동을 검토하였다. 해석 및 실험을 위한 대상 교량은 2경간 연속 강합성형 교량이다. 결정된프리스트레스 도입 방법은 두 가지로 대별되는데, 첫 번째는 내부 지점부 바닥판 콘크리트에 프리스트레스를 도입하는 것이고, 두 번째는 지점부 강박스 하부 플랜지에 프리스트레스를 도입하는 것이다. 실험을 위한 강합성형 교량의 모형시험체는 실제교량을 상사한 모델이다. 모형시험체는 내부 지점부 바닥판 콘크리트에 적절한 압축력이 도입되도록 시공순서를 고려하여 제작되었다. 모형시험체의 실험결과에 의하면, 프리스트레스를 도입한 강합성형 교량은 일반 강합성형 교량에 비하여 내구성이 우수함을 알 수 있었다. 즉 설계 활하중의 증가, 내부 지점부 바닥판 콘크리트 인장응력의 감소, 그리고 처짐의 감소 등과 같은 현상들을 관찰할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1569-1576
• /
• 2011

To install heavy structures in the railway bridges, crane methods or launching methods using temporary structure have been applied. These methods are uneconomical because working yard is required, temporary cut of rail system, etc. In this study, various construction methods has been developed which are suitable to the filed conditions. In the case of simple span structure like plate girder bridges, the girder is loaded to troy system at the working yard and then transferred to the working place. To lift and lower the girder system, a new transfer system was developed. Different methods each for simple span bridge girder and long span girder were developed and detailed work procedures were proposed. Using these methods, the heavy structures can be installed with simple and safe work procedures and the construction cost and duration can be reduced.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.567-583
• /
• 2013

Experimental studies and finite element analyses have been carried out to establish the effect of tendon damage on the structural behavior of concrete filled tubular tied arch girder (CFTA girder). The damage of tendon is considered in different stages by varying the number of damaged cables in the tendon. Static and dynamic structural parameters are observed at each stage. The results obtained from the experiments and numerical studies have been compared to validate the studies. The tendons whose damage can significantly affect the stiffness of the CFTA girder are identified by performing the sensitivity analysis. The locations in the girder which are sensitive to the tendon damage are also identified.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.725-736
• /
• 2017

This paper presents the two-, three-, and four-lane transverse reduction factor based on FEA method, probability theory, and the recently actual traffic flow data. A total of 72 composite girder bridges with various spans, number of lanes, loading mode, and bridge type are analyzed with time-varying static load FEA method by ANSYS, and the probability models of vehicle load effects at arbitrary-time point are developed. Based on these probability models, in accordance to the principle of the same exceeding probability, the multi-lane transverse reduction factor of these composite girder bridges and the relationship between the multi-lane transverse reduction factor and the span of bridge are determined. Finally, the multi-lane transverse reduction factor obtained is compared with those from AASHTO LRFD, BS5400, JTG D60 or Eurocode. The results show that the vehicle load effect at arbitrary-time point follows lognormal distribution. The two-, three-, and four-lane transverse reduction factors calculated by using FEA method and probability respectively range between 0.781 and 1.027, 0.616 and 0.795, 0.468 and 0.645. Furthermore, a correlation between the FEA and AASHTO LRFD, BS5400, JTG D60 or Eurocode transverse reduction factors is made for composite girder bridges. For the two-, three-, and four-lane bridge cases, the Eurocode code underestimated the FEA transverse reduction factors by 27%, 25% and 13%, respectively. This underestimation is more pronounced in short-span bridges. The AASHTO LRFD, BS5400 and JTG D60 codes overestimated the FEA transverse reduction factors. The FEA results highlight the importance of considering span length in determining the multi-lane transverse reduction factors when designing two-lane or more composite girder bridges. This paper will assist bridge engineers in quantifying the adjustment factors used in analyzing and designing multi-lane composite girder bridges.

• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.493-503
• /
• 2009

교량의 여유도는 주부재의 손상시 하중을 지탱할 수 있는 능력으로서 거더 개수, 지간, 형고, 내부지점, 부부재 등의 다양한 인자가 영향을 미치게 된다. 그러나, AASHTO 및 국내 도로교설계기준과 같은 현행 규정에서는 교량의 여유도를 단지 주거더의 개수로만 정의하고 있고, 그 평가 방법 및 요구 수준은 아직 제시되지 않고 있다. 이에 본 연구에서는 플레이트거더교를 대상으로 심각한 피로손상이 발생한 경우 주요 인자들을 고려하고 신뢰도 기법에 기반하여 교량의 여유도 평가 기법을 제안하였다. 또한, LRFD법 기반의 기준 교량에 대해 손상 시 내하력 해석과 신뢰성 해석을 수행하여 여유도의 요구 수준을 목표 시스템 신뢰도 지수 형태로 제안하였다. 마지막으로 현행 ASD법으로 설계된 단순 및 연속 플레이트거더교의 거더 수에 따른 여유도 수준을 평가 제시하였다.