• Title/Summary/Keyword: bridge appearance

Search Result 60, Processing Time 0.039 seconds

A Study on the Thermal Performance Analysis of Curtain Wall Office Building Considering the Thermal Bridges (열교부위를 고려한 커튼월 사무소 건물의 열성능 해석에 관한 연구)

  • Shin, U-Cheul;Kim, Seung-Chul;Yoon, Jong-Ho
    • Journal of the Korean Solar Energy Society
    • /
    • v.31 no.3
    • /
    • pp.95-100
    • /
    • 2011
  • Currently, office buildings in Korea tend to adopt as their outer wall the curtain wall structure which can be easily constructed and has beautiful external appearance as well. However, the problem is that the curtain wall structure does not have a uniform composition unlike the wall of existing reinforced concrete structures and has a frame made of metal with high heat conduction. Therefore, it is expected that the structure will be highly influenced by the thermal bridge. Thereupon, this study analyzes how to set up the composition of the wall system and heat transmission rate in consideration of the thermal characteristics of the curtain wall structure and applies it in practice by simulation in order to propose a guideline for the energy simulation method of the curtain wall structure and analyze its differences from existing simulation methods.

Structrral Analysis of Bridge Pier with 40MPa High Strength Concrete (설계강도 40MPa 고강도 콘크리트를 적용한 교량 교각 구조물의 구조해석)

  • Hur, Jae-Hun;Yi, Sang-Keun;Gwak, Seok-Hwan;Huh, Suk-Bum;Park, Chang-Min
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2009.05a
    • /
    • pp.157-158
    • /
    • 2009
  • In this study, We analyze structural behavior feature of column under reinforced-bar and concrete strength and load conditions and analyze optimal column diameter and construction cost through parameter study. In case we use the 40MPa high strength concrete instead of 27MPa concrete in pier, the results show positive effect in appearance of pier and cost because of small column diameter and low construction cost. Also, practical effect is proved by applying this results in pier of Shin Hou Bridge on Hum-Sung ${\sim}$ Chung-Ju highway construction work.

  • PDF

Planning and Design of Quingming Shanghe Park in Kaifeng

  • Liu, Xiao-ming
    • Journal of the Korean Institute of Landscape Architecture International Edition
    • /
    • no.1
    • /
    • pp.202-207
    • /
    • 2001
  • Covering an area of about 39 ha, Qingming Shanghe Park is located in the northwest of Kaifeng, formerly the capital of seven dynasties in China. It is intended to serve as a tourist attraction based on a painting 〃Qingming Festival at Riverside〃 by Zhang Zeduan of the Northern song Dynasty, which vividly illustrates a real life on the both sides of the Bian River as well as in the urban area, Kaifeng, in early Spring. The park is a collection of varied buildings such as shops, restaurants, tea-houses, theaters, and hotels in the North song style, with an introduction of the history of Kaifeng, this paper examines design philosophy and methodology of the park, and discusses the creative design of the first stage development known as known as The South Area of the park. Marked by the Rainbow Bridge and the City Gate, the South Area is divided into three parts, the rural, suburban, and urban parts which are organized according to the spatial order showed in the painting. The South Area proves to be very successful because of its amazing sense of history and interesting folk performance. Furthermore, the preliminary 9planning of the second stage development known as The North Area is presented with references to culture, history and customs. The North Area is proposed to include the Old Sports & Games Garden, the Exhibition Garden, and the Hot Spring Garden with an appearance of the imperial gardens in the Northern Song, integrated with participation of old sports and games, display of old science & technology achievements, and enjoyment of hot spring bath.

  • PDF

A STUDY OF THE EFFECTS OF THE LOW POWER DENSITY LASER ON THE MECHANICALLY EXPOSED PULP (저출력 레이저가 기계적 노출치수에 미치는 영향에 관한 연구)

  • Park, Dong-Sung;Lim, Sung-Sam
    • Restorative Dentistry and Endodontics
    • /
    • v.14 no.1
    • /
    • pp.109-118
    • /
    • 1989
  • The purpose of this study was to investigate the bio-stimulating effect of low power density laser radiation on the mechanically exposed pulp. Class V cavities on dog's teeth were prepared and the pulps were mechanically exposed with a round bur. In control group, the exposed pulps were capped with $Ca(OH)_2$ powder and the cavities were sealed with Z.O.E.. In experimental group A, the pulps were irradiated with GaA1As laser for 5 minutes and then they were treated the same as control group. In experimental group B, the exposed pulps were covered by aluminum foil and sealed with Z.O.E. after they were irradiated with the laser as the experimental group A. In the all groups, the pulps were histopathologically observed at the time intervals of 1, 2 and 3 week after experiment and the results were statistically evaluated. The results were as follows: 1) In control and experimental groups, mild vascular congestion and bleeding was found in most of the specimens and for the new formation of dentin bridge, experimental group A had the most cases. The dentin bridge had discontinuous osteodentin like appearance without any dentinal tubules. Inflammatory cell infiltration consisted of acute and chronic inflammatory cell, and the formation of microabscess was also observed. 2) The degree of inflammatory cell infiltration was not significantly different among control group and experimental groups at 1 week, 2 week and 3 week. 3) The formation of new dentin bridge was not significantly different between control group and experimental group A at 1 week, but at 2 week and 3 week, experimental group A showed significantly more cases of new dentin formation than control groups. (P < 0.05). 4) Between control group and experimental group B, there was no significant difference in formation of the new dentin bridge at 1, 2 and 3 week. (P> 0.05). 5) There was no significant difference in formation of the new dentin bridge at 1 and 2 week between experimental group A and experimental group B, but at 3 week, the former significantly had more cases of new dentin bridge formation than the latter.(P < 0.05).

  • PDF

THE EFFECT OF IRIDOID COMPOUND ON THE REMAINING PULP TISSUE AFTER PULPOTOMY (Iridoid 화합물이 치수절단 후 잔존치수 조직에 미치는 영향)

  • Kwon, Hyuk-Choon;Park, Dong-Sung;Son, Ho-Hyun
    • Restorative Dentistry and Endodontics
    • /
    • v.22 no.2
    • /
    • pp.710-719
    • /
    • 1997
  • Aucubin, an iridoid glucoside, which is isolated from Aucuba japonica, has some biological effects. This study was to investigate the effect of aucubin on the remainig pulp tissues after pulpotomy. Mongrel dog's coronal pulps were mechanically exposed with a sterile round bur and excised with sterile sharp excarvator. After bleeding was controlled, in control group, $Ca(OH)_2$ powder was applied on the remaining pulps and the cavities were sealed with Z.O.E. cement. In experimental group 1, mixed powder with $Ca(OH)_2$ and aucubin(l : 1 by weight) was applied on the pulpotomized pulp surfaces. After the cavities were covered with sterile aluminum foil, they were sealed with Z.O.E. cement. In experimental group 2, only aucubin powder was applied on the remaining pulps and then they were treated the same as experimental group 1. In the all groups, the pulps were histopathologically observed by light microscope at the time intervals of 1, 2 and 4 weeks after experiment. The results were as follows : 1. In control and experimental groups, mild vascular congestion and bleeding were found in most of the specimens. Less inflammatory infiltration was observed in experimental groups than in control group. 2. Dentin bridge formation was found after 1 week at both control and experimental group 1. Dentin birdge had discontinuous osteodentin like appearance or contained some dentin chips. In experimental group 2, dentin bridge was not seen. 3. The coagulation necrosis layer on the remaining pulp tissues was seen in all groups. In experimental group 2, the thickest layer was observed. And in control group, coagulation necrosis layer was similar as in experimental group 1.

  • PDF

A Study on Making a Replica for Restoration of the Stone Lion Statue Excavated from Woljeong Bridge (월정교 출토 사자상 복원을 위한 모본 제작 연구)

  • Lee, Chan Young;Han, Kyeong Soon
    • Journal of Conservation Science
    • /
    • v.31 no.2
    • /
    • pp.147-157
    • /
    • 2015
  • TExhibiting replicas of major artifacts is becoming common recently to raise their value and help the public to understand them. In Korea, more attention is paid only to appearance in creating replicas of artifacts. It is required to study reproduction technology minimizing damages to originals and applicable to massive artifacts like sculptures in the situation that replicas and artifact reproduction is increasing. To make a replica of the Stone Lion Statue excavated from Woljeong Bridge, a measured drawing and a cross section are produced based on art historical surveys using 3D scans. A non-contact reproduction method is selected. The strength of the non-contact reproduction method is that the output is detailed. Athough the non-contact method has known to be applicable only to small scale artifacts and require reprocess, it is discovered to be applicable to detailed statues like this lion statue. Therefore, this study may contribute to complement the historic authenticity of the statue as well as to raise its academic value. It also can be utilized as research material of similar artifacts'replicas and restoration.

A Study on the Possibility of Producing a Floor Plan of 「Donggwoldo(東闕圖)」 through the Use of Rubber Sheeting Transformation - With a Focus on the Surroundings near the Geumcheongyo Bridge in Changdeokgung Palace - (러버쉬팅변환을 통한 「동궐도(東闕圖)」의 평면도 제작 가능성 연구 - 창덕궁 금천교 주변을 중심으로 -)

  • Lee, Jae-Yong;Kim, Young-Mo
    • Korean Journal of Heritage: History & Science
    • /
    • v.50 no.4
    • /
    • pp.104-121
    • /
    • 2017
  • The present study attempted to produce the floor plan of the surroundings near Geumcheongyo Bridge in Changdeokgung Palace of the Late Joseon Period through the use of rubber sheeting transformation based on the drawing principles of "Donggwoldo(東闕圖)". First, the study compared the actual sizes of the major buildings that have existed since the production of "Donggwoldo(東闕圖)" with the sizes depicted in the picture to reveal that the front elevation of the buildings was produced by reducing it by approximately 1/200. However, the study could not confirm the same production proportions for the side elevation. Only the lengths of the side elevation were depicted at around half of the actual proportions, and as the diagonal line angles were found to be at an average of $39^{\circ}$, the study confirmed they were drawn in a manner similar to cabinet projection. Second, the study created an obliquely projected floor plan by inversely shadowing the drawing principles of "Donggwoldo(東闕圖)" and produced a floor plan of the surroundings near Geumcheongyo Bridge in Changdeokgung Palace through the use of rubber sheeting transformation. Projective transformation was confirmed as most suitable during the transformation, and with standard error of 2.1208m, the relatively high accuracy of the transformation shows that the production of a floor plan for "Donggwoldo(東闕圖)" is significant. Furthermore, it implies the possibility of producing floor plans for various documentary paintings produced using the paralleled oblique drawing method in addition to "Donggwoldo(東闕圖)". Third, the study evaluated the accuracy of the spatial information provided by the produced floor plan by comparing the three items of Geumcheongyo Bridge location, Geumcheongyo Bridge and Jinseonmun Gate arrangement, and Geumcheon stone embankment location. The results confirmed the possibility of utilizing the floor plan as a useful tool which helps understand the appearance of the surroundings at the time of "Donggwoldo(東闕圖)" production because it is parallel to the excavation results of the Geumcheongyo Bridge and its context. Therefore, the present study is significant in that it seeks the possibility of producing spatial information recorded in "Donggwoldo(東闕圖)" by applying rubber sheeting transformation and consequently in that it presents a new methodology for understanding the appearance of the East Palace of the Late Joseon Period.

Acute Rotator Cuff Tears due to Low Voltage Electrical Injury: A Case Report

  • Yoo, Jae Hyun;Rhee, Sung-Min;Shim, Ho Yong;Lee, Jae Sung
    • Clinics in Shoulder and Elbow
    • /
    • v.21 no.2
    • /
    • pp.101-104
    • /
    • 2018
  • Since shoulder have a higher proportion of muscle which would have low electrical resistance, there could be more electrical damage to the rotator cuff muscles. We present a patient with acute rotator cuff tear by sudden uncontrolled jerking contractions caused by an electrical shock. A case of 42-year-old man with acute rotator cuff tear due to electrical injury to the shoulder was presented. Magnetic resonance imaging showed a full thickness tear and an undulating appearance of the peripheral end of the torn supraspinatus and infraspinatus muscle, suggesting an acute complete rupture. By arthroscopic surgery, the torn rotator cuff tendons were repaired with a suture bridge technique. At the final follow-up, the patient had a full, pain-free range of motion and had fully recovered shoulder muscle power.

Resin-bonded fixed partial denture using In-Ceram and Targis-Vectris system: A clinical report

  • Cha, Young-Joo;Yang, Jae-Ho
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.38 no.3
    • /
    • pp.375-381
    • /
    • 2000
  • The conventional approach for replacing missing maxillary lateral incisors dictates the placement of either a conventional porcelain-fused-to-metal (PFM)bridge, resin-bonded fixed partial denture, or single implant prosthesis. However, several appearance-related disadvantages have been reported in the use of a prosthesis which incorporates a metal substructure. To address these limitations, metal -free restorative alternatives have been recently developed to expand the clinical options when fabrication of these prostheses is indicated. This clinical report describes the treatment of patients with a missing maxillary lateral incisor where the dentition was non-invasively restored with resin-bonded fixed partial denture(RBFPD) using In-Ceram and Targis-Vectris system.

  • PDF

Prenatal Development of Tvrosine Hlrdroxvlase-Containing Neurons in the Rat Brain (흰쥐 태아 뇌에서 TH 신경세포의 초기발생과정)

  • 이영기;장가용
    • The Korean Journal of Zoology
    • /
    • v.36 no.2
    • /
    • pp.209-222
    • /
    • 1993
  • The present study attempts to explore the first appearance 8nd subsequent development of %cosine hvdroxvlase (TH)-containing neurons in the rat brain from embryonic day (E) 10.5 to the neonate. To increase the senti노ivity and resolution power, a double bridge peroxidase-anti-peroxidase technique was employed for cellular localization of TH. In situ hybridization histochemistw with synthetic TH oligomer (30-mer) codinB TH was also used to detect TH mRNA. TH-containing neurons were first detected at E11.5 in the intermediate zone of prosencepha1on and mesencephalon. At this stage, TH-immunoreactive neurons were small, ovoid bee and emitted their fibres into their immediate surroundings. From this stage, TH-immunoreactive neurons increased in their number and underwent migration and cell differentiation. At E15.5, the distribution pattern of the maior groups of TH neurons was similar to that of adult catecholaminergic groups, and at E19.5 the external laver of median eminence showed TH-immunoreactive processes.

  • PDF