• 한국농촌건축학회논문집
• /
• 제13권1호
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• 건축역사연구
• /
• 제4권2호
• /
• pp.25-44
• /
• 1995

Bricks are the earliest man-made building materials. Small-size bar bricks were found in use in the Warring States Period(戰國時代) in China. During the Qin(秦) and the Han(漢) Dynasties, brick constructions were built on a larger scale, but most of them were tombs. In case of Korea, bricks were found in use in the Three Kingdoms Period, but also most of them were tombs. Starting from the Unified Silla Period(統一新羅時代), brick gradually became a universal practice to built Buddhist Pagodas with bar bricks. Brick pagodas emergence marked a stage where technological progress made it possible for man to built high-rise brick work, and their dvelopment further perfected masonry technique and enabled building technology to attain new heights. Though from the very start brick pagodas existed side by side with stone pagodas, at the enitial stage they were overshadowed by their wooden counterparts and stone counterparts, because masonry thechiques were then still rather primitive, while woodwork and stonework had already reached a fairly advaced stage. The pagodas in ancient Korea were closely related to the Chinese stupa, which consisted of three parts, namely, the base, the body and the spire. The fact was, soon after the stupas were introduced into Korea, the Korean stupas began to develop features of their own. Korean brick pagodas were made up of a single-storeyed square base, multi-storeyed square body with a small gate, and a steel post with several layers of lotus flower superimposed one on the other.

• 농촌계획
• /
• 제18권4호
• /
• pp.61-67
• /
• 2012

Recently, brick walls are being widely introduced in rural areas. Walls are a very important design element of space. However, most brick wall works do not consider the human psychological characteristics. The purpose of this study was to investigate psychological characteristics on brick wall bonds such as the stack bond, running bond, english bond, flemish bond, america bond. The results of the research can be summarized as follows: 1)There is no statistical difference of psychological evaluation results among student groups using the semantic differential scale method using 10 adjectives. 2)Stack bonds have an uninspiring, artificial, simple, restful, boring and ordered psychological characteristic. Running bonds have an uninspiring, restful and ordered psychological characteristic. America bonds have a unique and modernistic psychological characteristic. English bonds have a unique, modernistic, complex and chaotic psychological characteristic. Flemish bonds have no critical psychological characteristics. 3)The running bond earned the highest score in preference, while the stack bond scored the lowest. Employment of brick wall bonds on this study was not highly preferred, hence it is necessary to develop a new brick wall bond design. 4)In conclusion, the proper selection of brick wall bonds is very important and we should consider human psychological characteristics in the design of rural areas.

• 한국환경보건학회지
• /
• 제40권6호
• /
• pp.484-491
• /
• 2014

Objectives: A radon emission reducing agent was prepared using charcoal and zeolite, and the amount was measured after coating construction materials with the agent. The availability of the radon emission reducing agent was evaluated. Methods: Construction materials (red brick, cement brick, and gypsum board) coated with reducing agent were placed in a chamber to measure radon emissions. The construction materials were coated one through three times. The spread volume for brick and gypsum board was 50 mL and 75 mL per application, respectively. The amount of radon emitted was measured by RAD-7 after 48 hours. Results: The reduction ratio increased with the number of coatings, and the reduction ratios for red brick, cement brick, and gypsum board were 63.3, 73.6, and 58%, respectively, in the case of three coatings of RA-1. The reduction ratios for red brick, cement brick, and gypsum board were 42.8, 58.1, and 26.2%, respectively in the case of three coatings with RA-2. RA-1 was slightly better than RA-2 in radon emission reduction. Conclusions: Radon emissions from construction materials decreased according to the concentration of reducing agent coating, and it was more effective than existing methods.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.29-37
• /
• 2013

In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.

• 한국멀티미디어학회논문지
• /
• 제10권9호
• /
• pp.1175-1184
• /
• 2007

기초적인 조형 교구인 브릭 제품이 현재는 사용자 계층의 확장에 성공하며, 특유의 가변성과 타 분야와의 뛰어난 연계성을 장점으로 다양한 분야와 독창적인 방식으로의 접목을 시도하고 있다. 하지만 실제로 브릭에 대한 기존의 연구는 그 가치이외의 무한한 가변성과 다변화 차원에서의 연구가 부족하다. 본 연구는 이 같은 인식하에 브릭의 본질적 속성에 관한 이론적 근거를 기반으로 보다 진화한 미래형 브릭 시스템의 현황을 제시하고 체계적으로 분석하는 방식으로 진행하였다. 최종적으로는 3D브릭시스템을 활용한 VR 디자인을 구현해보는 프로세스를 수행하였다. 브릭 시스템의 '다변화 및 확장성'에 관한 연구는 브릭의 미래적 가능성과 활용성을 파악하는데 중요한 자료를 제공 할 것이다.

• 한국세라믹학회지
• /
• 제18권4호
• /
• pp.247-256
• /
• 1981

Silica bricks had been in arc-furnace roofs of various sizes and steelmaking practices. The resulting materials were examined with reference to mineral and chemical changes. Silica bricks develope definite zones while in service. These zones represent a concentration gradient through the brick that results from the thermal gradient across the brick and from the furnace atmosphere. There are major brick losses by spalling as well as by melting of the hot-face surface in an iron-oxide rich liquid.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.744-754
• /
• 2015

동아시아에서 불사의 건립은 도성 및 궁궐과 더불어 가장 중요한 건축 활동 중의 하나로 인지되며, 특히 불탑은 부처의 사리를 모시는 상징적인 의미를 가진 불교건축의 가장 중요한 요소로서 불사의 중심에 위치하였다. 이에 본 연구는 안동 조탑리 오층전탑이 해체 보수 하고 있는 상황에서, 7-9세기 석탑의 내부구조체계를 통하여 전탑의 축조과정 등을 해석하고자 연구를 실시하였다. 그 결과, 첫째, 전탑의 파괴현상으로 측력으로 인한 밀림현상과 부재의 소성온도, 배합물질의 차이로 인한 부재의 파손을 들 수 있었다. 둘째, 전탑은 석탑과 같이 의장적인 부분과 구조적인 부분으로 구분되어 조영된 것을 알 수 있었다. 의장적인 부분은 가장자리에 있는 전으로 구성되며, 구조적인 부분은 가장자리 전과 내부 중심까지로 의장적인 전의 안쪽에는 완충공간 즉 상부하중이 수직으로 내려오면서 측력이 발생하는 것을 잡아주는 공간에 석재를 둔 것으로 분석되었다. 셋째, 내부중앙에 목주를 두어 전탑의 조영 시 중심축을 잡아주는 역할을 하였으며, 그 중심축은 찰주공의 하단까지 이어져 있었다. 넷째, 찰주공은 따로 내부 적심의 중앙에 따로 분리 축조하였다. 그리고 찰주공의 하단에는 찰주의 안착 및 위치선정, 뒤틀림보정을 위하여 구멍을 뚫어 놓았다. 이로 인하여 찰주는 자중으로 움직이지 않는 철재보다 목재로 설치하였을 가능성을 두었다.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.51-59
• /
• 1986

It was the first time the MgO-C brick was developed for the lining materials in the hot spots in electric are furnace in 1972. MgO-C brick is high registant to thermal and structural spalling. Futhermore for the reason that carbon is hard to react with slag and MgO is high fireproof MgO-C brick shows a high corrosion registance to slag attack compared with conventional basic refractories. Owing to their excellent properties the use of MgO-C refractories are being developed widely in the field of shaped refractories and even in that of monolithic refractories. In this paper the oxidation of carbon the infiltration of slag into the brick texture and effects of additions were investigated. The results obtained were as follows : 1) The use of fused MgO-clinker and high purity carbon as raw materials increased the corosion registance and hot modulus of rupture of MgO-C brick. 2) As the oxidation reaction of the carbon proceeded the slag infiltrated into the brick texture. And then the slag components reacted with the MgO grains and formed low melting point compounds particulary CaO.MgO.$SiO_2$ and 3CaO.MgO.$2SiO_2$ that resulted in the wear of the brick. 3) It is recongnized the Al, Si, $B_3C$ effects on the oxidation registant properties of MgO-C brick by contribu-ting to the decrease of permeability according to the formation of $Al_4C_3$, SiC, $B_2O_3$ and the decrease of open pores relating to the formation of MgO.Al2O3, $SiO_2$, 3MgO.$B_2O_3$ at the decarbonized layer.

• Advances in environmental research
• /
• 제1권1호
• /
• pp.83-96
• /
• 2012

The water sludge is generated from the treatment of water with alum. Disposing of sludge again to the streams raises the concentrations of aluminum oxides in water, which has been linked to Alzheimer's disease. The use of water treatment plant (WTP) sludge in manufacturing of constructional elements achieves both the economical and environmental benefits. Due to the similar mineralogical composition of clay and WTP sludge, this study investigated the complete substitution of brick clay by sludge incorporated with some of the agricultural and industrial wastes, such as rice husk ash (RHA) and silica fume (SF). Three different series of sludge to SF to RHA proportions by weight were tried, which were (25: 50: 25%), (50: 25: 25%), and (25: 25: 50%), respectively. Each brick series was fired at 900, 1000, 1100, and $1200^{\circ}C$. The physical and mechanical properties of the produced bricks were then determined and evaluated according to Egyptian Standard Specifications (E.S.S.) and compared to control clay-brick. From the obtained results, it was concluded that by operating at the temperature commonly practiced in the brick kiln, a mixture consists of 50% of sludge, 25% of SF, and 25% of RHA was the optimum materials proportions to produce brick from water sludge incorporated with SF and RHA. The produced bricks properties were obviously superior to the 100% clay control-brick and to those available in the Egyptian market.