• 한국환경과학회지
• /
• 제19권12호
• /
• pp.1403-1407
• /
• 2010

The adsorption characteristics of $CO_2$ gas on impregnated activated carbons with MEA (Mono-ethanolamine) and AMP (2-Amino 2-methyl 1-propanol) were studied to improve the adsorption ability of $CO_2$ gas on activated carbon. The equilibrium adsorption capacity of $CO_2$ gas was increased by increment of impregnation concentration up to 40 %, but decreased above 50 %. The adsorption capacity of activated carbon impregnated with AMP was higher than activated carbon impregnated with MEA. The breakthrough was fast according to increment of inlet concentration of $CO_2$ gas.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.143-148
• /
• 2007

도시가스를 원료로 수소를 제조하여 연료전지에 활용할 경우에 도시가스에 포함된 황화합물이 개질기의 촉매와 연료전지의 전극에 독으로 작용하므로 금속이온이 담지 된 $\beta$-제올라이트(BEA)로 황화합물 흡착 제거를 수행하였다. 담지 된 금속염의 농도, 종류에 따라 파과흡착량이 달라졌으며, $AgNO_3$이 담지 된 흡착제가 실험에 사용된 흡착제 중 가장 높은 파과흡착량을 나타내었다(41.1 mg/g). 그러나 $Ni(NO_3)_2$, $Fe(NO_3)_3$, $Co(NO_3)_2$와 같은 금속염이 담지 된 BEA도 $AgNO_3/BEA$와 비교할 수준의 황화합물 흡착량을 나타냈다. $AgNO_3/BEA$ 흡착제 특성 분석과 온도 영향성 실험 및 X선 광전자 분광기(x-ray photoelectron spectroscopy, XPS) 분석을 통하여 흡착제와 황화합물 사이에 작용하는 힘은 금속이온과 황화합물간의 화학적 상호작용보다 물리적 상호작용이 우세한 것으로 나타났다.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.65-71
• /
• 2015

This study accessed the adsorption characteristics of the 9 trihalomethanes (THMs) on coal-based granular activated carbon (GAC). The breakthrough appeared first for $CHCl_3$ and sequentially for $CHBr_2Cl$, $CHBr_3$, $CHCl_2I$, CHBrClI, $CHBr_2I$, $CHClI_2$, $CHBrI_2$, and $CHI_3$. The maximum adsorption capacity (X/M) for the 9 THMs with apparent breakthrough points ranged from $1,175{\mu}g/g$ (for $CHCl_3$) to $11,087{\mu}g/g$ (for $CHI_3$). Carbon usage rate (CUR) for $CHCl_3$ was 0.149 g/day, 5.5 times higher than for $CHCl_3$ (0.027 g/day).

• 한국환경과학회지
• /
• 제24권9호
• /
• pp.1123-1129
• /
• 2015

This research was performed by means of several different virgin granular activated carbons (GAC) made of each coal, coconut and wood, and the GACs were investigated for an adsorption performance of iodine-131 in a continuous adsorption column. Breakthrough behavior was investigated that the breakthrough points of the virgin two coals-, coconut- and wood-based GACs were observed as bed volume (BV) 7080, BV 5640, BV 5064 and BV 3192, respectively. The experimental results of adsorption capacity (X/M) for iodine-127 showed that two coal- based GACs were highest (208.6 and $139.1{\mu}g/g$), the coconut-based GAC was intermediate ($86.5{\mu}g/g$) and the wood-based GAC was lowest ($54.5{\mu}g/g$). The X/M of the coal-based GACs was 2~4 times higher than the X/M of the coconut-based and wood-based GACs.

• 공업화학
• /
• 제25권2호
• /
• pp.167-173
• /
• 2014

정수 슬러지를 재활용하여 제조한 펠렛형 흡착제의 트리메틸아민과 암모니아의 흡착 특성을 연구하였다. 펠렛형 흡착제를 $110^{\circ}C$에서 건조 처리 했을 때보다 $500^{\circ}C$에서 소성했을 때 BET 표면적과 기공 부피가 증가하는 것을 알 수 있었다. 정수 슬러지를 재활용하여 제조한 펠렛형 흡착제는 브뢴스테드 산점과 루이스 산점을 보유하는 것을 확인하였다. 흡착질 가스인 트리메틸아민과 암모니아가 일정한 농도로 흡착제 층으로 유입되고, 흡착제의 중량과 흡착질의 선속도를 변화시키면서 흡착질 가스의 파과시간을 측정하였다. Wheeler의 흡착속도식을 사용하여 트리메틸아민과 암모니아의 동적흡착용량과 흡착속도상수를 결정하였다. 동적흡착용량과 흡착속도상수가 흡착질 가스의 선속도에 따라 변화함을 알 수 있었다. 정수 슬러지를 재활용하여 제조한 펠렛형 흡착제 상에서, 다양한 흡착조건에서 트리메틸아민과 암모니아의 파과시간을 예측하기 위한 실험식을 도출하였다.

• Environmental Engineering Research
• /
• 제13권2호
• /
• pp.79-84
• /
• 2008

Adsorption of heavy metals by sawdust was investigated to evaluate the effectiveness of using sawdust to remove heavy metals from aqueous solutions. Kinetic and isotherm studies were carried out by considering the effects of initial concentration and pH. The adsorption isotherms of heavy metals fitted the Langmuir or Freundlich model reasonably well. The adsorption capacity of metal was in the order $Pb^{2+}$ > $Cu^{2+}$ > $Zn^{2+}$. A high concentration of co-existing ions such as $Ca^{2+}$ and $Mg^{2+}$ depressed the adsorption of heavy metal. Adsorption data showed that metal adsorption on sawdust follows a pseudo-second-order reaction. Kinetic studies also indicated that both surface adsorption and intraparticle diffusion were involved in metal adsorption on sawdust. Column studies prove that sawdust could be effective biosorbent for the removal of heavy metals from aqueous phase.

• Carbon letters
• /
• 제16권1호
• /
• pp.19-24
• /
• 2015

The breakthrough behaviour of activated charcoal cloth samples against an oxygen analogue (OA) of sulphur mustard has been studied using the modified Wheeler equation. Activated charcoal cloth samples having different surface area values in the range of 481 to $1290m^2/g$ were used for this purpose. Breakthrough behaviour was found to depend on the properties of the activated charcoal cloth, properties of the OA and the adsorption conditions. Activated charcoal cloth with a high surface area of $1290m^2/g$, relatively large surface density of $160g/m^2$ and coarser fiber structure exhibited better kinetic saturation capacity value, 0.19 g/g, against OA vapours when compared to others, thus confirming its potential use in foldable masks for protection against chemical warfare agents.

• 폴리머
• /
• 제27권1호
• /
• pp.61-68
• /
• 2003

본 연구에서는 도금폐수 중 니켈이온의 분리 회수를 위한 혼성 이온교환체의 제조 및 흡착 특성을 확인하였다. 니켈 흡착량은 이온교환체의 혼합비에 큰 영향이 없었으며, 비드상 이온교환수지 양이 증가할수록 증가하였다. 또한 Langmuir와 Freundlich흡착 등온식이 직선성을 보였으며 이로부터 니켈의 이온교환 친화력이 큰 것을 확인하였다. 또한 충전방식에 따른 압력손실은 다단충전법에서 적층수가 많아질수록 작아졌고, 혼합충전법에서는 비드 이온교환수지의 양이 증가할수록 압력손실은 감소하였다. 한편, 연속식 흡착실험 결과 다단충전방식의 경우 적층수가 증가할수록 초기 파괴 시간은 짧아졌으며, 최종 파괴 시간은 거의 동일한 것으로 나타났다. 반면, 혼합충전방식의 경우 이온교환섬유의 양이 증가할수록 흡착파괴 시간이 짧았으며, 이때 최대 흡착량은 각각 2.51 meq/g과 2.69 meq/g이었다. 한편, 모든 이온 교환체의 흡착된 니켈이온의 탈착은 10분 이내에 98% 이상 탈착되었다.

• 환경위생공학
• /
• 제14권2호
• /
• pp.18-24
• /
• 1999

The purpose of this study was carried out to estimate removal possibility of IBMP and IPMP causing odor in raw water. As a result of Freundlich isotherm. IBMP was superior to IPMP in adsorptive capacity. Adsorptive capacities of activated carbon were found to be in order of Lignite, Coconut shell, and Charcoal. These were well fitted with Freundlich isotherm. According to adsorption breakthrough tests for Lignite GAC, breakthrough time of IPMP and IBMP were 5.7hr and 5.5hr, respectively. Because adsorptive capacities of target material were very different with pore size distribution, it seemed that Lignite and Coconut shell based activated carbons were recommended in order to remove door compounds.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.695-699
• /
• 2006

This study is to investigate the relationship between pore structures of activated carbons and adsorption characteristics of toluene vapor using dynamic adsorption method. The surface areas of below $10{\AA}$ in the pore diameter of activated carbons used in this experiment were in the range of 72 -93 % of total cumulative surface area and the toluene vapor equilibrium adsorption capacities were in the range of 350 - 390mg/g. Activated carbons having larger toluene adsorption capacity than the compared activated carbons had relatively pores in the pore diameter range of $7-10{\AA}$. Linear relationship between equilibrium adsorption capacity and cumulative sur- face area was in the diameter range of over $7{\AA}$. It was thought that toluene vapor was relatively well adsorbed on surfaces of pores of over $7{\AA}$.