• 한국광학회지
• /
• 제5권1호
• /
• pp.51-59
• /
• 1994

네 개의 평면 반사경과 두 개의 볼록 렌즈로 구성된 Newtonian 망원경 형의 negative branch confocal unstable ring (NBCUR) 공진기를 이용한 진행파형 Nd:YAG 레이전 발진기를 설계 제작하였다. 출력경으로 scraper mirror를 사용하여 원고리형 출력광을 얻었다. 이 레이저 발진기는 22개의 광학면을 가지고 있으며 이의 광학적 시준은 등경사 간섭법에 의해 간섭무늬를 관측함으로서 해결하였다. 일방향 진행파형 레이저 발진을 이룩하기 위하여 고리형 공진기 내에 자체 설계 제작된 영구 자석형 Faraday isolator를 삽입하였고, 이에 의한 발진 효과를 검토 하였다. 전기 입력 에너지 70J에서 레이저 출력에너지 약 80mJ 이었으며, BDN 색소에 의한 수동형 Q 스위칭에 의하여 첨두 출력 0.5 MW를 얻었다.

• 한국경영과학회지
• /
• 제41권1호
• /
• pp.1-19
• /
• 2016

While previous studies on service failures mainly focused on general services, this study examines the effects of failed financial services on the psychological process and behavioral responses of consumers. The important factors of financial service (relational benefits, convenience, branch satisfaction, product diversity, company stability, and product profitability) are regarded as antecedents in our model. We study how each factor of failed financial service affects the negative emotions of consumers through the attribution process and how these arising emotions influence their behavioral responses. Through path analysis, this study shows that failure of service factors of relational benefits, branch satisfaction, and convenience induces disappointment, with the mediation effect of external attribution. Meanwhile, failure of service factors of product diversity and product profitability induces regret, with the mediation effect of internal attribution. Disappointment leads to complaint behavior, and regret leads to switching behavior. Unlike previous studies, the present one considers the important factors of financial service and their effects on the affective and behavioral responses of consumers.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2129-2138
• /
• 2016

The full-bridge inverter, widely used for single-phase photovoltaic grid-connected applications, presents a leakage current issue. Therefore, an AC bypass branch is introduced to overcome this challenge. Nevertheless, existing modulation strategies entail drawbacks that should be addressed. One is the zero-crossing distortion (ZCD) of the AC current caused by neglecting the AC filter inductor voltage. Another is that the system cannot deliver reactive power because the AC bypass branch switches at the power frequency. To address these problems, this work proposes an optimized hybrid modulation strategy. To reduce ZCD, the phase angle of the inverter output voltage reference is shifted, thereby compensating for the neglected leading angle. To generate the reactive power, the interval of the negative power output is calculated using the power factor. In addition, the freewheeling switch is kept on when power is flowing into the grid and commutates at a high frequency when power is fed back to the DC side. In this manner, the dead-time insertion in the high-frequency switching area is minimized. Finally, the performances of the proposed modulation strategy and traditional strategies are compared on a universal prototype inverter. Experimental results validate the theoretical analysis.

• 한국광학회지
• /
• 제8권3호
• /
• pp.245-249
• /
• 1997

본 논문에서는 모드 결합을 최적화하기 위해 수정된 결합 영역을 갖는 전기광학 폴리머 디지탈 광스위치를 제작하였다. 분기형 도파로는 반응이온식각 방법을 이용하여 만들었다. 그리고, 수정된 결합 영역은 두 광도파로의 분기점에서부터 광파의 진행 방향을 따라 점진적으로 도입하였으며, 소자 제작 이후에 광표백 방법을 이용하여 구현하였다. 분기 영역에서 두 도파로 간의 모드 결합이 최적화 되도록 수정된 결합 영역의 구조와 굴절률 분포를 조절함으로써, 소자의 길이가 고정되어 있는 상태에서 스위칭 성능을 향상시켰다. 측정 결과에 의하면, 구동 전압은 약 30%이상 감소되었으며 누화는 4~6 dB정도 개선되었다.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1187-1194
• /
• 2017

In this paper, a high step-up DC-DC PWM converter with continuous input current and low voltage stress is presented for renewable energy application. The proposed converter is composed of a boost converter integrated with an auxiliary step-up circuit. The auxiliary circuit uses an additional coupled inductor and a balancing capacitor with voltage doubler and switching capacitor technique to achieve high step-up voltage gain with an appropriate switch duty cycle. The switched capacitors are charged in parallel and discharged in series by the coupled inductor, stacking on the output capacitor. In the proposed converter, the voltage stress on the main switch is clamped, so a low voltage switch with low ON resistance can be used to reduce the conduction loss which results in the efficiency improvement. A detailed discussion on the operating principle and steady-state analyses are presented in the paper. To justify the theoretical analysis, experimental results of a 200W 40/400V prototype is presented. In addition, the conducted electromagnetic emissions are measured which shows a good EMC performance.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1076-1081
• /
• 2007

본 논문은 시분할 송수신 시스템에 사용될 수 있는 새로운 구조의 스위칭회로를 제안한다. 기존의 시분할 송수신 시스템에 사용되는 스위칭 회로의 경우 안테나, 송신단 그리고 수신단을 서큘레이터로 각 단자를 분리하였다. 이러한 기존의 방법은 서큘레이터 사용으로 인하여 회로전체의 가격을 증가시키는 원인이 되며, 원치 않는 상호 변복조 성분이 만들어져 전체 시스템의 악화로 이어지게 된다. 본 논문에서 제안하는 회로는 비선형 소자인 서큘레이터를 사용하지 않고 기본적인 가지선로 결합기의 한 쪽 선로를 결합선로로 등가 모델링하여 응용한 회로이다. 이 회로는 등가 모델링 된 결합선로의 격리 포트를 개방/단락의 종단조건을 이용하여 신호의 흐름을 제어하는 새로운 구조의 스위칭회로이다. 본 논문에서는 제시한 설계법의 타당성을 검증하기 위하여 Wibro 서비스 주파수대역인 2.3GHz에서 제작 및 측정하였다.

• 한국경영과학회지
• /
• 제24권3호
• /
• pp.93-107
• /
• 1999

We consider the development of an integer programming model and algorithm for the ATM switching node location problem. There are two kinds of facilities, hub facilities and remote facilities, with different capacities and installation costs. Each customer needs to be connected to one or more hub facilities via remote facilities, where the hub(remote) facilities need to be installed at the same candidate installation site of hub(remote) facility. We are given a set of customers with each demand requirements, a set of candidate installation sites of facilities, and connection costs between facilities, We need to determine the locations to place facilities, the number of facilities for each selected location, the set of customers who are connected to each installed hub facilities via installed remote facilities with minimum costs, while satisfying demand requirements of each customer. We formulate this problem as a general integer programming problem and solve it to optimality. In this paper, we develop a branch-and-cut algorithm with path variables. In the algorithm, we consider the integer knapsack polytope and derive valid inequalities. Computational experiments show that the algorithm works well in the real world situation. The results of this research can be used to develop optimization algorithms to solve capacitated facility location problems.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.332-342
• /
• 2018

This paper proposes a parameter design method for multi-element resonant converters (MERCs) with a unique resonant zero point (RZP). This method is mainly composed of four steps. These steps include program filtration, loss comparison, 3D figure fine-tuning and priority compromise. It features easy implementation, effectiveness and universal applicability for almost all of the existing RZP-MERCs. Meanwhile, other design methods are always exclusive for a specific topology. In addition, a novel dual-CTL converter is also proposed here. It belongs to the RZP-MERC family and is designed in detail to explain the process of parameter selection. The performance of the proposed method is verified experimentally on a 500W prototype. The obtained results indicate that with the selected parameters, an extensive dc voltage gain is obtained. It also possesses over-current protection and minimal switching loss. The designed converter achieves high efficiencies among wide load ranges, and the peak efficiency reaches 96.9%.

• Advances in nano research
• /
• 제15권6호
• /
• pp.521-531
• /
• 2023

Quantum-dot cellular automata (QCA) has shown great potential in the nanoscale regime as a replacement for CMOS technology. This work presents a specific approach to static random-access memory (SRAM) cell based on 2:1 multiplexer, 4-bit SRAM array, and 32-bit SRAM array in QCA. By utilizing the proposed SRAM array, a single-layer 16×32-bit SRAM with the read/write capability is presented using an optimized signal distribution network (SDN) crossover technique. In the present study, an extremely-optimized 2:1 multiplexer is proposed, which is used to implement an extremely-optimized SRAM cell. The results of simulation show the superiority of the proposed 2:1 multiplexer and SRAM cell. This study also provides a more efficient and accurate method for calculating QCA costs. The proposed extremely-optimized SRAM cell and SRAM arrays are advantageous in terms of complexity, delay, area, and QCA cost parameters in comparison with previous designs in QCA, CMOS, and FinFET technologies. Moreover, compared to previous designs in QCA and FinFET technologies, the proposed structure saves total energy consisting of overall energy consumption, switching energy dissipation, and leakage energy dissipation. The energy and structural analyses of the proposed scheme are performed in QCAPro and QCADesigner 2.0.3 tools. According to the simulation results and comparison with previous high-quality studies based on QCA and FinFET design approaches, the proposed SRAM reduces the overall energy consumption by 25%, occupies 33% smaller area, and requires 15% fewer cells. Moreover, the QCA cost is reduced by 35% compared to outstanding designs in the literature.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.459-462
• /
• 2004

In this paper, we present a reducing power consumption of a scheduling for module selection under the time constraint. A a reducing power consumption of a scheduling for module selection under the time constraint execute scheduling and allocation for considering the switching activity. The focus scheduling of this phase adopt Force-Directed Scheduling for low power to existed Force-Directed Scheduling. and it constructs the module selection RT library by in account consideration the mutual correlation of parameters in which the power and the area and delay. when it is, in this paper we formulate the module selection method as a multi-objective optimization and propose a branch and bound approach to explore the large design space of module selection. Therefore, the optimal module selection method proposed to consider power, area, delay parameter at the same time. The comparison experiment analyzed a point of difference between the existed FDS algorithm and a new FDS_RPC algorithm.