• 한국전산구조공학회논문집
• /
• 제14권4호
• /
• pp.445-454
• /
• 2001

본 연구는 전단변형형 강가새 골조의 탄소성 거동에 관한 연구로서 강가새 골조의 종류로는 X형 및 K형이며, 각 종류별 주 변수는 세장비로 되어있다. 재료의 응력도-변형도 관계는 변형경화현상을 고려한 Tri-linear형 모델을 사용하였다. 또한, 하중-변위 관계는 유한차분법을 이용하여 해석하였다. 하중-변위관계에 관하여 탄성구배 및 최대하중에 관하여 해석결과치와 실험결과치를 비교하였고, 그 비는 약 10%내외의 오차를 보임에 따라 본 논문에서 제안한 해석법은 합리적임을 나타내었다.

• 한국지진공학회논문집
• /
• 제18권3호
• /
• pp.133-140
• /
• 2014

The friction damper can be used for improving the seismic resistance of existing buildings. The damper is often installed in bracing members. The energy dissipation capacity of the damping systems depends on the type of the structure, the configuration of the bracing members, and the property of dampers. In Korea, there are numerous low- to mid-rise reinforced concrete moment frames that were constructed considering only gravity loads. Those frames may be vulnerable for future earthquakes. To resolve the problem, this study developed a toggle bracing system with a high density friction damper. To investigate the improvement of reinforced concrete frames after retrofit using the developed damped system, experimental tests were conducted on frame specimens with and without the damped system. The results showed that the maximum strength, initial stiffness and energy dissipation capacity of the framed with the damped system were much larger than those of the frame without the damped system.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.585-596
• /
• 2017

Tubular joints have been widely used in offshore platforms and space structures due to their merits such as easy fabrication, aesthetic appearance and better static strength. For existing tubular joints, a grouted sleeve reinforced method was proposed in this paper. Experimental tests on five tubular T-joints reinforced with the grouted sleeve and two conventional tubular T-joints were conducted to investigate their mechanical behaviour. A constant axial compressive force was applied to the chord end to simulate the compressive state of the chord member during the tests. Then an axial compressive force was applied to the top end of the brace member until the collapse of the joint specimens occurred. The parameters investigated herein were the grout thickness, the sleeve length coefficient and the sleeve construction method. The failure mode, ultimate load, initial stiffness and deformability of these joint specimens were discussed. It was found that: (1) The grouted sleeve could change the failure mode of tubular T-joints. (2) The grouted sleeve was observed to provide strength enhancement up to 154.3%~172.7% for the corresponding un-reinforced joint. (3) The initial stiffness and deformability were also greatly improved by the grouted sleeve. (4) The sleeve length coefficient was a key parameter for the improved effect of the grouted sleeve reinforced method.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.1045-1062
• /
• 2015

Concrete-filled circular t steel tubular joints (CFSTJs) in practice are frequently subjected to fluctuated loadings caused by wind, earthquake and so on. As fatigue crack is sensitive to such cyclic loadings, assessment on performance of CFSTJs with crack-like defect attracts more concerns because both high stress concentration at the brace/chord intersection and welding residual stresses along weld toe cause the materials in the region around the intersection to be more brittle. Once crack initiates and propagates along the weld toe, tri-axial stresses in high gradient around the crack front exist, which may bring brittle fracture failure. Additionally, the stiffness and the load carrying capacity of the CFSTJs with crack may decrease due to the weakened connection at the intersection. To study the behaviour of CFSTJs with initial crack, experimental tests have been carried out on three full-scale CFCST T-joints with same configuration. The three specimens include one uncracked joint and two corresponding cracked joints. Load-displacement and load-deformation curves, failure mode and crack propagation are obtained from the experiment measurement. According to the experimental results, it can be found that he load carrying capacity of the cracked joints is decreased by more than 10% compared with the uncracked joint. The effect of crack depth on the load carrying capacity of CFCST T-joints seems to be slight. The failure mode of the cracked CFCST T-joints represents as plastic yielding rather than brittle fracture through experimental observation.

• Archives of Reconstructive Microsurgery
• /
• 제24권2호
• /
• pp.68-74
• /
• 2015

Purpose: The reconstruction of femur and tibia defects following tumor resection remains a surgical challenge. The clinical outcome of free vascularized fibula graft (VFG) reconstruction with locking plate for massive femur and tibia defects of more than 10 cm that were secondary to skeletal tumor resection is reported. Materials and Methods: Thirteen patients with a mean follow-up of 3.3 years were reviewed. Seven patients received vascularized fibula grafts in the femur and six in the tibia. The mean bony defect of the femur and tibia was more than 10 cm and the length of the grafted fibula was more than 15 cm. All defects were stabilized with long locking plates. Results: All patients were free of disease at final follow-up; All VFGs were transferred successfully. All patients had a successful outcome with bony union. Stress fractures of the grafted fibula had occurred but the locking plate stabilized the fracture and healed until the last follow-up. All patients were able to walk without a brace after a mean of 9 months postoperatively. Conclusion: VFG with locking plate is a reliable reconstructive procedure for massive femur and tibia defects.

• Animal Systematics, Evolution and Diversity
• /
• 제18권2호
• /
• pp.203-211
• /
• 2002

한국의 동해안과 남해안에서 채집한 동문동물 1신종(Echinoderes lanceolatus)을 기재한다. 표본은 조하대의 저질과 해조류를 플랑크톤 넷트에 걸러 채집하였다. 이 종은 제3마디 흉판 중앙부 양측의 커다란 각흔(殼痕) 제4마디 흉판의 희미한 중앙연접 자국. 각각 해당 몸통 마디보다 약간 짧은 제6-10정중등가시. 암컷 제9-10마디 흉판의 중괄호형 근흔(筋痕), 마지막 복판의 뒷가장자리가 곧은점, 그리고 표창처럼 날카롭고 긴 제13마디의 등돌기가 특징이다.

• 한국공간구조학회논문집
• /
• 제19권4호
• /
• pp.45-52
• /
• 2019

The purpose of the paper is to introduce a system that reduces the occurrence of weak-story in the event of earthquake. Weak-story concentrates deformation on the story and causes all member to collapse before the capacity of all member is reached. This paper introduces Strong-Back system (SB) to protect weak story. SB is a hybrid of zipper frame, tied eccentrically braced frame, and elastic truss system and it is divided into elastic and inelastic areas. Elastic areas prevent the generation of weak story by distributing energy, and inelastic areas dissipate energy through buckling or yielding. In this paper, the seismic performance is evaluated by comparing the four type braced frame with SB through push-over analysis. The four criteria are compared from the base shear, the ductility capacity, the column failure order, and the quantity of brace. As a result, SB proved to have sufficient performance to protect the weak-story.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.884-892
• /
• 2006

A friction-type reinforcing member(FRM) is proposed for the purpose of upgrading wind resistant performance of a transmission tower and verified through cyclic loading tests. First, suitable install scheme of the FRM is investigated through numerical analysis. Main-post-reinforcing type and X-brace type installation schemes are examined, and numerical analysis shows that the former is more effective due to the vertical cantilever type behavior of the transmission tower. Based on this result, two types of the FRM's, dissipating energy in slotted belted connections, are proposed. The one utilizes the relative displacement between the FRM and the main post, and the other utilizes that between the separated angles consisting of the FRM as a slip deformation of the slotted bolted connection. Proposed FRM's are installed on each main post of the 1/2 scale substructure models of an actual transmission tower body. From cyclic loading tests, the latter type of the proposed FRM's dissipates energy more effectively and its slip load is controlled by applied torque well, and shares considerable amount of the axial force in the main post.

• 대한족부족관절학회지
• /
• 제12권1호
• /
• pp.59-65
• /
• 2008

Purpose: To evaluate the results of anterolateral thigh perforator free flap for reconstruction of foot and ankle in old diabetic patients. Materials and Methods: Fifteen diabetic foot ulcer patients over the age of 55 were operated with anterolateral thigh perforator free flap. Hematological, hemodynamic, diabetic, bacteriologic and radiologic tests were checked with examination of blood vessel state in both the donor site and the recipient site. After surgery, serial check-up was performed at 6 week, 6 month, and 1 year postoperatively on the survival of transplantation tissue, condition of foot, and condition of walking. Results: There are one case of transplantation failure and four cases of partial tissue-necrosis. Delayed wound-healing was observed both recipient and donor tissue sites. At the final follow up, three cases of small ulcer were found at junction of flap and recipient tissue in plantar area. Fourteen out of fifteen patients could walk without any brace or walking aids. Conclusion: Reconstruction of foot and ankle region in old diabetic patients with the anterolateral thigh perforator free flap is a useful method which can prevent the amputation of foot and ankle.

• 한국안전학회지
• /
• 제5권2호
• /
• pp.66-75
• /
• 1990

This study is conducted to establish the structural standard of tube and coupler scaffold which is suitable for our present stuation through the comparison analysis for domestic and foreign standards as well as measurement of field survey. The results of this study are as follows ： 1) The load is classified by three categories, light-duty(equal and lower than 150kg/m$^2$), medium-duty(150-250 kg/m$^2$), heavy-duty(250-350kg/m$^2$), and the equivalent horizontal length of side posts is each, 1.5-1.8m, 1.2-1.5m, equal and lower than 1.2m, and the equivalent horizontal length between front and rear posts is each 1.2-1.5m, 0.9-1.2m, equal and lower thatn 0.9m, in accordance with the load classification. 2) The height between upper and lower runner is equal and lower than 1.5m, and the brace across the width of scaffold should be installed within 15m in horizontal direction at 45 degree angle. 3) The entire scaffold should be securely tied to the wall of permanent structure with uslng anchor and bolt at intervals not to exceed 6m in case of non-connection and 4.5m in case of connection in both horizontal and vertical direction. 4) The post should be installed on the sound foundation tied to lumber footing with using base plate, and standard platform plank should be produced in the factory and widely used in the construction field.