Browse > Article
http://dx.doi.org/10.12989/scs.2017.23.5.585

Experimental studies on behaviour of tubular T-joints reinforced with grouted sleeve  

Jiang, Shouchao (Department of Building Engineering, Tongji University)
Guo, Xiaonong (Department of Building Engineering, Tongji University)
Xiong, Zhe (School of Civil and Transportation Engineering, Guangdong University of Technology)
Cai, Yufang (Xuhui Shanghai Land Reserve Co., Ltd.)
Zhu, Shaojun (Department of Building Engineering, Tongji University)
Publication Information
Steel and Composite Structures / v.23, no.5, 2017 , pp. 585-596 More about this Journal
Abstract
Tubular joints have been widely used in offshore platforms and space structures due to their merits such as easy fabrication, aesthetic appearance and better static strength. For existing tubular joints, a grouted sleeve reinforced method was proposed in this paper. Experimental tests on five tubular T-joints reinforced with the grouted sleeve and two conventional tubular T-joints were conducted to investigate their mechanical behaviour. A constant axial compressive force was applied to the chord end to simulate the compressive state of the chord member during the tests. Then an axial compressive force was applied to the top end of the brace member until the collapse of the joint specimens occurred. The parameters investigated herein were the grout thickness, the sleeve length coefficient and the sleeve construction method. The failure mode, ultimate load, initial stiffness and deformability of these joint specimens were discussed. It was found that: (1) The grouted sleeve could change the failure mode of tubular T-joints. (2) The grouted sleeve was observed to provide strength enhancement up to 154.3%~172.7% for the corresponding un-reinforced joint. (3) The initial stiffness and deformability were also greatly improved by the grouted sleeve. (4) The sleeve length coefficient was a key parameter for the improved effect of the grouted sleeve reinforced method.
Keywords
connections; failure mode; steel-concrete composite;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Liu, H., Shao, Y., Lu, N. and Wang, Q. (2015), "Hysteresis of concrete-filled circular tubular (CFCT) T-joints under axial load", Steel Compos. Struct., Int. J., 18(3), 739-756.   DOI
2 Pantelides, C.P., Nadauld, J. and Cercone, L. (2003), "Repair of cracked aluminum overhead sign structures with glass fiber reinforced polymer composites", J. Compos. Constr., 7(2), 118-126.   DOI
3 Shao, Y.B. (2016), "Static strength of collar-plate reinforced tubular T-joints under axial loading", Steel Compos. Struct., Int. J., 21(2), 323-342.   DOI
4 Sharaf, T. and Fam, A. (2013), "Finite element analysis of beamcolumn T-joints of rectangular hollow steel sections strengthened using through-wall bolts", Thin-Wall. Struct., 64, 31-40.   DOI
5 Yang, J., Shao, Y.B. and Chen, C. (2012), "Static strength of chord reinforced tubular Y-joints under axial loading", Marine Struct., 29(1), 226-245.   DOI
6 Lesani, M., Bahaari, M.R. and Shokrieh, M.M. (2014), "Experimental investigation of FRP-strengthened tubular Tjoints under axial compressive loads", Constr. Build. Mater., 53, 243-252.   DOI
7 Aguilera, J. and Fam, A. (2013), "Retrofitting tubular steel T-joints subjected to axial compression in chord and brace members using bonded FRP plates or through-wall steel bolts", Eng. Struct., 48, 602-610.   DOI
8 Ahmadi, P. (2016), "A probability distribution model for SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to out-of-plane bending loads", Ocean Eng., 116, 184-199.   DOI
9 Chen, Y. and Chen, D.F. (2016), "Ultimate capacities formulae of collar and doubler plates reinforced SHS X-joints under inplane bending", Thin-Wall. Struct., 99, 21-34.   DOI
10 Chen, Y.Y. and Wang, W. (2003), "Flexural behavior and resistance of uni-planar KK and X tubular joints", Steel Compos. Struct., Int. J., 3(2), 123-140.   DOI
11 Christitsas, A.D., Pachoumis, D.T., Kalfas, C.N. and Galoussis, E.G. (2007), "FEM analysis of conventional and square birdbeak SHS joint subject to in-plane bending moment-experimental study", J. Constr. Steel Res., 63(10), 1361-1372.   DOI
12 CIDECT (2008), Design guide for circular hollow section (CHS) joints under predominantly static loading; Cologne, Germany.
13 Cui, M.J. and Shao, Y.B. (2015), "Residual static strength of cracked concrete-filled circular steel tubular (CFCST) T-joint", Steel Compos. Struct., Int. J., 18(4), 1045-1062.   DOI
14 Eurocode 3 (2005), Design of steel structures-Part 1-8: Design of joints; European Committee for Standardization, EN1993-1-8, CEN, Brussels, Belgium.
15 Feng, R. and Young, B. (2009), "Behaviour of concrete-filled stainless steel tubular X-joints subjected to compression", Thin-Wall. Struct., 47(4), 365-374.   DOI
16 Feng, R. and Young, B. (2011), "Design of cold-formed stainless steel tubular T- and X-joints", J. Constr. Steel Res., 67(3), 421-436.   DOI
17 Lesani, M., Bahaari, M.R. and Shokrieh, M.M. (2013), "Numerical investigation of FRP-strengthened tubular T-joints under axial compressive loads", Compos. Struct. J., 100, 71-78.   DOI
18 GB 50017-2003 (2003), Code for design of steel structures; Ministry of housing and urban-rural development of the people's republic of China, General administration of quality supervision, inspection and quarantine of the people's republic of China. [In Chinese]
19 GB/T 228-2002 (2002), Metallic materials-tensile testing at ambient temperature; General administration of quality supervision, inspection and quarantine of the People's Republic of China. [In Chinese]