• Industrial Engineering and Management Systems
• /
• v.12 no.4
• /
• pp.351-358
• /
• 2013

This paper proposes a multiobjective model describing the trade-offs involved in selecting the locations of drop-off boxes for collecting used products and transporting these products to designated locations. We assume the following reverse flow of used products. Owners of used products (cellular phones, digital cameras, ink cartridges, etc.) take them to the nearest drop-off box when the distance is reasonably short. We also assume that owners living closer to drop-off boxes dispose of more used products than do owners living farther from drop-off boxes. Different types of used products are collected, with each type requiring its own drop-off box. A transportation destination for each product is specified. Three objectives are considered: maximizing the volume of used products collected at drop-off boxes; minimizing the cost of transporting collected products to designated locations; and minimizing the cost of allocating space for drop-off boxes. We formulate the above model as a multiobjective integer programming problem and generate the corresponding set of Pareto optimal solutions. We apply the model to an area using population data for Chofu City, Tokyo, Japan, and analyze the trade-offs between the objectives.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.885-895
• /
• 2016

The lowest power mode (passive-standby mode) was proposed for reducing the power consumption of set-top boxes in a standby state when not receiving content. However, low-power set-top boxes equipped with the lowest power mode have been rarely commercialized because of their low-quality user experience. In the lowest power mode, they deactivates almost all of operational modules and processes, and thus require dozens of seconds for activation latency (that is, the latency for activating all modules of the set-top boxes in a standby state). They are not even updated in a standby state because they deactivate their network interfaces in a standby state. This paper proposes an adaptive standby mode scheduling method for improving the user experience of such boxes. Set-top boxes using the proposed method can analyze the activation pattern and find the frequently used time period (that is, when the set-top boxes are frequently activated). They prepare for their activation during this frequently used time period, thereby reducing the activation latency and enabling their update in a standby state.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.1
• /
• pp.22-29
• /
• 2007

Two fuzzy controllers defined by 2 input variables cooperate to control a cartpole system in terms of balancing as well as centering. The cooperation is due to the BOXES scheme that selects one of the fuzzy controllers for each time step according to the content of box that is established through the critic of the control action by the fuzzy controllers. It is found that the control scheme is good at controlling the cartpole system so that the system is stabilized fast while the BOXES develops its ability to select proper fuzzy controller through experience.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.160-165
• /
• 2000

The study aimed to review linerboard compositions of corrugated fiberboard boxes for Oriental melons(Cucumis melon L. var makuwa), analyzing relationships among material compositions, price, weight of boxes, theoretical compression and bursting strength of various liner boards. 19 and 22 different liner boards were currently used for the bleached and the unbleached corrugated boards, respectively. The corrugated board containers with the bleached liners were mostly used in the market although the average price was 10 percents higher than the unbleached. The average compression strength of the bleached. We strongly recommend to redesign the boxes because the average compression and bursting strength of the current boxes were much higher than national packaging standards as much as 70 and 82, respectively.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.191-197
• /
• 1996

Allowable stacking duration of the corrugated fiberboard boxes being widely used for packaging fruits and vegetables was analyzed by the creep behavior and the cumulative load correction factor for the boxes. The stacking boxes were assumed to be stored at a nearly constant temperature and relative humidity condition. When the stacking duration was short period, the stacking height determined by two methods showed a little difference between them, but almost no difference was shown as the stacking duration was longer. Allowable stacking duration was rapidly decreased with the increase of static load applied on the stacking boxes, and allowable stacking duration of Box A was estimated the longer than that of Box B. A model of allowable stacking duration for the corrugated fiberboard box was developed as a function of the stacking load and the ambient relative humidity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.986-990
• /
• 2009

Using artificial rainfall simulator, the soil loss, which is deemed as most cause of muddy water problem among Non-point source(NPS) pollutant, was studied by the analysis of direct runoff flow, groundwater runoff, and groundwater storage properties concerned with rainfall intensity, slope of area, and land cover. The direct runoff showed increasing tendency in both straw covered and bared boxes which are 5%, 10%, and 20% sloped respectively. Also the direct runoff volume from straw covered surface boxes were much lower than bared surface boxes. It's deemed as that the infiltration capacity of straw covered surface boxes were increased, because the surface sealing by fine material of soil surface didn't occurred due to the straw covering. Under the same rainfall intensity and slope condition, 2.4 ${\sim}$ 8.2 times of sediment yield were occurred from bared surface boxes more than straw covered surface boxes. The volume of infiltrated were increased due to straw cover, the direct runoff flow were decreased with decreasing of tractive force in surface. To understand of relationship the rate of direct runoff flow, groundwater runoff, and groundwater storage by the rainfall intensity, slope, and land cover, the statistical test was performed. It shows good relationship between most of factors, expect between the rate of groundwater storage and rainfall intensity.

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.338-341
• /
• 2005

This study was conducted to describe the differences in artificial nest boxes use of tits between deciduous and coniferous forests at 2nd campus of Chung-Ang University ($37^{\circ}00^{\prime}04^{{\prime}{\prime}}N$, $127^{\circ}13^{\prime}96^{{\prime}{\prime}}E$), Ansung, Korea from January to August 2005. Tree species richness, tree species diversity index (H') and total basal areas were higher in deciduous forest than in coniferous forest. High, middle, low and understory canopy layers were more developed in deciduous forest, except the coverage of bush-ground layer. Varied tit Parus varius, marsh tit P. palustris and great tit P. major used the artificial nest boxes in this study. Number of breeding pairs of tits used artificial nest boxes, clutch size, and weight and size of eggs were higher in deciduous forest than in coniferous forest. The differences in habitat structure between study sites are very likely to have influenced how breeding birds used the available habitat. Artificial nest boxes could be used as management and conservation tool for birds, particularly in areas, where the availability of natural cavities and coverage of higher layer are limited.

• Journal of Ecology and Environment
• /
• v.45 no.3
• /
• pp.152-162
• /
• 2021

Background: Recent declines in bee populations, along with increasing demand for pollination services in urban, agricultural, and natural environments, have led to strategies to attract wild bees to these areas. One of these strategies is installing artificial nests adjacent to urban gardens and agricultural farms. Bee hotels and nest boxes are among the artificial nests used by gardeners and farmers to attract pollinators. In this paper, we reviewed 50 studies that reported the efficiency of nest boxes and bee hotels in attracting bees. We considered the maximum occupation rate (percentage) as the main index to evaluate the efficiency of artificial nests. Results: The maximum occupation rate of bee hotels was higher in farms (averaged 44.1%) than in forests (averaged 30.3%) and urban (averaged 38.3%) environments. In the case of nest boxes, most studies reported efficiencies of less than 20%, with an occupation rate of 16% and 5.5% on average in forest and urban environments respectively. However, our meta-analysis results showed that there was no significant relationship between the occupation rate of the nests and their installation place. Regression analysis also showed that the structural features of bee hotels (length and diameter) and nest boxes (volume and entrance size) did not affect their efficiency in attracting bees. Conclusion: Our data showed that the strategy of installing artificial nests to attract pollinators is successful only concerning bee hotels, and the use of nest boxes has not been very successful.

• The Journal of Korea Robotics Society
• /
• v.17 no.4
• /
• pp.417-424
• /
• 2022

In this paper, the developed trunk cargo unloading automation system is introduced, and the RGB-D sensor-based box loading situation recognition method and unloading plan applied to this system are suggested. First of all, it is necessary to recognize the position of the box in a truck. To do this, we first apply CNN-based YOLO, which can recognize objects in RGB images in real-time. Then, the normal vector of the center of the box is obtained using the depth image to reduce misrecognition in parts other than the box, and the inner wall of the truck in an image is removed. And a method of classifying the layers of the boxes according to the distance using the recognized depth information of the boxes is suggested. Given the coordinates of the boxes on the nearest layer, a method of generating the optimal path to take out the boxes the fastest using this information is introduced. In addition, kinematic analysis is performed to move the conveyor to the position of the box to be taken out of the truck, and kinematic analysis is also performed to control the robot arm that takes out the boxes. Finally, the effectiveness of the developed system and algorithm through a test bed is proved.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.493-500
• /
• 2020

The purpose of this study is to analyze the effect of the visual element of the label design image of premium lunch boxes and general lunch boxes on purchasing intention. As a method of research, the label design images and purchase intentions of premium lunch boxes and general lunch boxes from the nation's leading convenience store brands, Seven Eleven, GS25, and CU, were investigated through a survey, T-verification was conducted based on the measured average value and standard deviation was completed after analysis with SPSS 21. The results of the study showed that the label design of premium lunch boxes was recognized by consumers as a premium image that was a point of differentiation from general lunch boxes, and that the proportion of "quality" and "menu composition" was high, This indicates that convenience store premium lunch boxes could also offer consumers a competitive edge in value that is considered premium other than "price."