• 복합신소재구조학회 논문집
• /
• 제2권1호
• /
• pp.15-22
• /
• 2011

펄트루젼 FRP 구조용 부재는 많은 유용한 역학적, 물리적 성질 때문에 토목분야에서 구조부재의 매력적인 대체부재로 고려될 수 있다. 그러나 펄트루젼 FRP는 탄성계수가 상대적으로 낮고, 부재의 단면이 복부와 플렌지 등의 얇은 판요소로 구성되어 있기 때문에 압축재로 설계할 때 구조적인 안정성은 매우 중요한 고려사항이 된다. 따라서, 압축을 받는 구조용 부재의 설계를 위해, 판요소의 좌굴 및 후좌굴강도를 고려해야 한다. AISC/LRFD의 강구조 설계기준에서는, 후좌굴강도에 추가적인 단면 내 일정하지 않은 응력분포의 영향을 형상계수(form factor)를 사용하여 고려하고 있다. 이 논문에서는 압축력을 받는 펄트루젼 FRP 구조용 부재의 형상계수를 해석적으로 연구하였으며, 형상계수를 설정하는 과정에 대하여 제안하였다.

• Imaging Science in Dentistry
• /
• 제40권3호
• /
• pp.123-129
• /
• 2010

Purpose : To evaluate the effect of surgical treatment of ligature-induced peri-implantitis in dogs using fractal analysis. Also, the capabilities of fractal analysis as bone analysis techniques were compared with those of histomorphometric analysis. Materials and Methods : A total of 24 implants were inserted in 6 dogs. After a 3-months, experimental periimplantitis characterized by a bone loss of about 3 mm was established by inducing with wires. Surgical treatment involving flap procedure, debridement of implants surface with chlorhexidine and saline (group 1), guided bone regeneration (GBR) with absorbable collagen membrane and mineralized bone graft (group 2), and $CO_2$ laser application with GBR (group 3) were performed. After animals were sacrificed in 8 and 16 weeks respectively, bone sections including implants were made. Fractal dimensions were calculated by box-counting method on the skeletonized images, made from each region of interest, including five screws at medial and distal aspects of implant, were selected. Results : Statistically significant differences in the fractal dimensions between the group 1($0.9340{\pm}0.0126$) and group 3($0.9783{\pm}0.0118$) at 16 weeks were found (P<0.05). The fractal dimension was statistically significant different between 8($0.9395{\pm}0.0283$) and 16 weeks in group 3 (P<0.05). These results were similar with the result of the evaluation of new bone formation in histomorphometric analysis. Conclusions : Treatment of experimental peri-implantitis by using $CO_2$ laser with GBR is more useful than other treatments in the formation of new bone and also the tendency of fractal dimension to increase relative to healing time may be a useful means of evaluating.

• Structural Engineering and Mechanics
• /
• 제54권6호
• /
• pp.1135-1152
• /
• 2015

Most of current bridge decks are made of reinforced concrete and often deteriorate at a relatively rapid rate in operational environments. The quick deterioration of the deck often impacts other critical components of the bridge. Another disadvantage of the concrete deck is its high weight in long-span bridges. Therefore, it is essential to examine new materials and innovative designs using hybrid system consisting conventional materials such as concrete and steel with FRP plates which is also known as composite deck. Since these decks are relatively new, so it would be useful to evaluate their performances in more details. The present study is dedicated to Hat-Shape composite girder with concrete slab. The structural performance of girder was evaluated with nonlinear finite element method by using ABAQUS and numerical results have been compared with experimental results of other researches. After ensuring the validity of numerical modeling of composite deck, parametric studies have been conducted; such as investigating the effects of constituent properties by changing the compressive strength of concrete slab and Elasticity modulus of GFRP materials. The efficacy of the GFRP box girders has been studied by changing GFRP material to steel and aluminum. In addition, the effect of Cross-Sectional Configuration has been evaluated. It was found that the behavior of this type of composite girders can be studied with numerical methods without carrying out costly experiments. The material properties can be modified to improve ultimate load capacity of the composite girder. strength-to-weight ratio of the girder increased by changing the GFRP material to aluminum and ultimate load capacity enhanced by deformation of composite girder cross-section.

• 한국전산구조공학회논문집
• /
• 제34권5호
• /
• pp.309-317
• /
• 2021

이 논문에서는 박스형 전력구의 지진응답해석에 사용되는 응답진도법의 보수성을 평가하였다. 이를 위해 25가지 전력구 단면과 각 전력구에 대한 2개의 지반조건을 고려한 총 50개 예제를 선정하였다. 응답진도법의 보수성을 평가하기 위해 동적 지반-구조물 상호작용을 고려한 정밀해석법에 의한 응답과 비교하였다. 비교결과, 정밀해석 응답에 대한 응답진도법에 의한 응답의 비로 정의한 응답비의 평균이 1.0에 근접하며, 응답비의 표준편차도 5% 이내로 매우 작아서, 응답진도법에 의한 해석이 정밀해석법과 일관됨을 알 수 있었다. 마지막으로 응답진도법에 의한 응답에 하중계수 1.1을 적용하면 전력구의 보수적인 내진설계가 가능할 것으로 나타났다.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.65-80
• /
• 2021

Irregularities of a building in plan and elevation, which results in the change in stiffness on different floors highly affect the seismic performance and resistance of a structure. This study motivated to investigate the seismic responses of high-rise steel-frame buildings of twelve stories with various stiffness irregularities. The building has five spans of 3200 mm distance in both X- and Z-directions in the plan. The design package SAP2000 was adopted for the design of beams and columns and resulted in the profile IPE500 for the beams of all floors and box sections for columns. The column cross-section dimensions vary concerning the number of the story; one to three: 0.50×0.50×0.05m, four to seven: 0.45×0.45×0.05 m, and eight to twelve: 0.40×0.40×0.05 m. Real recorded ground accelerations obtained from the Vrancea earthquake in Romania together with dead and live loads corresponding to each story were considered for the applied load. The model was validated by comparing the results of the current method and literature considering a three-bay steel moment-resisting frame of eight-story height subject to seismic load. To investigate the seismic performance of the buildings, the time-history analysis was performed using ABAQUS. Deformed shapes corresponding to negative and positive peaks were provided followed by the story drifts and fragility curves which were used to examine the probability of collapse of the building. From the results, it was concluded that regular buildings provided a seismic performance much better than irregular buildings. Furthermore, it was observed that building with torsional irregularity was more vulnerable to seismic failure.

• 대한교통학회지
• /
• 제32권4호
• /
• pp.369-379
• /
• 2014

전통적인 사고예측모형은 통계적 회귀분석에 주로 의존하였으나, 이는 자료 분포 및 함수 형태에 대한 가정에 따른 한계를 가지고 있다. 이에 따라 일부 연구는 신경망 등의 비모수적 기법을 모형 구축에 활용하였으나, 이는 독립변수와 종속변수 간의 직접적인 관계 규명이 어렵다는 한계가 있다. 유전자 프로그래밍 기법은 모형 개발에 특별한 가정이 필요없고, 사고요인 규명이 가능하다는 장점이 있다. 따라서 본 연구에서는 고속도로의 사고예측에 유전자 프로그래밍 기법을 적용함으로써 이러한 한계를 극복하고자 하였다. 이를 위하여 경부고속도로에서 최근 3년간(2010-2012년) 구득된 자료를 활용하였으며, 보다 세밀한 사고 특성 규명을 위해 고속도로 구간을 직선 구간과 곡선 구간으로 구분하였다. 사고 발생에 중요한 영향을 미치는 변수를 선택하기 위하여 랜덤 포레스트 기법을 이용하였으며, 최종 선택된 변수들을 활용하여 사고예측을 위한 유전자 프로그래밍 모형을 구축하였다. 구축된 모형의 예측 성능을 평가하기 위해 음이항 회귀모형과 비교해본 결과, 유전자 프로그래밍 모형의 예측 성능이 더 우수한 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제20권11호
• /
• pp.520-526
• /
• 2019

플레이트 거더교에서 I형은 매우 경제적인 단면으로 넓게 적용되고 있으며 지금까지 복합적층의 패널, 폐단면 리브로 보강된 곡판, 새로운 형태의 리브, 새로운 형식의 강박스거더 압축플랜지 개발 등의 좌굴거동에 대한 연구가 활발히 진행되었다. 하지만 이는 I형 거더의 복부판에서 발생한 국부좌굴의 원인을 정확하게 분석하는데 한계가 있었다. 따라서 본 논문에서는 실제 적용된 I형 거더의 복부판이 도로교설계기준에서 제시하는 최소두께 기준의 만족여부와 보강전과 후에 대하여 유한요소해석 프로그램 LUSAS 17.0을 사용하여 모델링하고 고정하중과 활하중에 대한 선형탄성 좌굴 해석을 수행 후 좌굴발생의 원인을 분석하였다. 보강 전은 1mode의 고유치(λ₁) 값이 0.7025로 임계좌굴하중이 작용하중보다 작아 좌굴이 발생하였지만 보강 후는 거더 지점부의 복부판에 수직 및 수평보강재를 추가함에 따라 여기에 Nodal line이 형성되고 좌굴에 대한 저항강도가 증가하여 1mode의 고유치(λ₁) 값이 1.5272로 좌굴하중에 대한 안정성을 확보한 것으로 분석되었다. 또한 지점부의 좌굴 흔적을 개선하기 위해 복부판의 일부에 덧댐판을 추가한 보강방안에 대한 좌굴해석 결과 1mode의 좌굴이 복부판의 지점부가 아닌 중앙부에서 발생하였고 고유치(λ₁)값이 3.5299로 보강 후보다 2배 이상 커서 향후 지점부의 복부판 보강방안으로는 효과적일 것으로 기대된다.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.35-44
• /
• 2018

PURPOSES : The purpose of this research is to analyze the characteristics of panels that affect the evaluating results of riding quality and to evaluate the appropriateness of roughness management criteria based on ride comfort satisfaction. METHODS : In order to analyze the influence of panel characteristics of riding quality, 33 panels, consisting of civilians and experts, were selected. Also, considering the roughness distribution of the expressway, 35 sections with MRI ranging from 1.17 m/km to 4.65 m/km were selected. Each panel boarded a passenger car and evaluated the riding quality with grades from 0 to 10, and assessed whether it was satisfied or not. After removing outlier results using a box plot technique, 964 results were analyzed. An ANOVA was conducted to evaluate the effects of panel expertise, age, driving experience, vehicle ownership, and gender on the evaluation results. In addition, by using the receiver operating characteristics (ROC) curve, the MRI value, which can most accurately evaluate the satisfaction with riding quality, was derived. Then, the compatibility of MRI was evaluated using AUC as a criterion to assess whether the riding quality was satisfactory. RESULTS : Only the age of the panel participants were found to have an effect on the riding quality satisfaction. It was found that satisfaction with riding quality and MRI are strongly correlated. The satisfaction rate of roughness management criteria on new (MRI 1.6 m/km) and maintenance (MRI 3.0 m/km) expressways were 95% and 53%, respectively. As a result of evaluating the roughness management criteria by using the ROC curve, it was found that the accuracy of satisfaction was the highest at MRI 3.1-3.2 m/km. In addition, the AUC of the MRI was about 0.8, indicating that the MRI was an appropriate index for evaluating the riding quality satisfaction. CONCLUSIONS : Based on the results, the distribution of the panels' age should be considered when panel rating is conducted. From the results of the ROC curve, MRI of 3.0 m/km, which is a criterion of roughness management on maintenance expressways, is considered as appropriate.

• 한국가정과교육학회지
• /
• 제11권2호
• /
• pp.89-110
• /
• 1999

The purpose of this study was to investigate the perception and eating behaviors of middle school students in Kwangju area about food and nutrition section of Home Economics course. The subjects were 480 middle school students. The major results were as follows： On the perception f food and nutrition section, the 1st graders learned ‘how to settle the problems related to food and nutrition and food choices’. The 2nd graders learned ‘the knowledge and principle of food and nutrition for improving dietary life’. The 3rd graders learned ‘actual dietary life functions like arranging menu and preparing meals’. Consequently, there was a significant difference in each grade and all boy and girl students have the highest response to the item ‘they learn how to settle the nutrition problem and foods choices’. On the interests in food and nutrition section, lower graders and girl students have higher interest than hgiher graders and boy students. The area which was considered as most interesting in food and nutrition sections was ‘cooking’ in all students. The perception of the concern on dietary life after learning food and nutrition section was higher in the 1st graders. On the perception of the area where was a great change in their own dietary life after learning food and nutrition section, the 1st graders responded there was a great change in ‘balanced dietary life’, the 2nd graders in ‘eating habit and nutrition of adolescence’and the 3rd graders in ‘cooking’. Especially, girl students showed more changes. On the perception of degree which food and nutrition section gives a help to actual life, students over 50% responded that it was helpful to their actual life. This showed that the lower the grades, the more help it gave to those students. On the perception of mother’s job, the students with working mother considered that they learned ‘actual dietary life functions like functions like arranging menu and preparing meals’from the food and nutrition section. In addition, they had high interests in the area of ‘cooking’. It was recognized that as the family size was greater, the food and nutrition section gave more helps to actual life. On eating behaviors of breakfast, the higher the grade, the more frequent they don’t have breakfast, boy students have more frequencies of having breakfast than girl students and the primary reason of not having breakfast is poor appetite. On whether going without a meal affects study or not, most of the 1st, 2nd and 3rd graders whether they are boys and girls or not responded it affected their study. On eating behaviors of lunch, most of boy and girl students in the 1st, 2nd 3rd grade have lunch box. On eating behaviors of supper, eating time is usually between 7：00 and 8：00 p.m and eating hour is mostly 10 or 15 minutes. On eating behaviors between meals, frequency of eating between meals is mostly once or twice a day and girl students have more frequencies of eating between meals, and the cause was hunger commonly in boy and girl students and ‘killing time’in girl students. The focus in getting the foods is ‘taste’and favorite food is fruit regardless of the grade.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.67-76
• /
• 2011

동토지역 말뚝기초의 지지력은 말뚝과 토사의 접촉면에서 작용하는 동착강도에 지배된다. 말뚝주변 토사 내 간극수의 동결로 인해 발현되는 동착강도는 동토지반 기초설계에 있어 가장 주요한 설계정수로 고려되고 있다. 지난 50년간 동착강도에 대한 연구가 다각도로 수행되어 왔으나, 대부분 동결온도와 지중온도를 고정조건으로 그 영향력을 고려하지 않은 채 토사종류, 말뚝종류, 재하속도 등의 영향인자를 분석하기 위한 목적으로 수행되었다. 본 연구에서는 동결온도와 마찰면에 작용하는 수직구속응력을 주요 변수로 적용하고, 토사종류, 말뚝종류, 재하속도 등은 고정조건으로 적용하여 직접전단방식의 동착강도 측정실험을 수행하였다. 실험재료로는 표면 가공이 용이하여 거칠기를 정밀하게 조절할 수 있는 알루미늄 모형과 주문진표준사를 활용하였다. 실험은 상온(> $0^{\circ}C$), $-1^{\circ}C$, $-2^{\circ}C$, $-5^{\circ}C$, $-10^{\circ}C$의 동결온도및 1atm, 2atm, 3atm의 수직구속응력 조건에서 수행되었으며, 그 결과를 바탕으로 동결온도와 수직구속응력이 동착강도에 미치는 영향을 분석하였다. 전반적으로 동착강도는 동결온도가 낮아질수록, 혹은 수직구속응력이 커질수록 증가하는 경향을 보였으며, 특히 단위온도차에 따른 동착강도의 증가율이 1)급증하는 구간과 2)점진적으로 감소하는 구간을 뚜렷하게 나타내며 변화하는 특성을 보였다. 또한, 동결온도의 저하에 따라 동착강도의 변화를 지배하는 요소가 마찰각에서 부착력으로 변화하며 수렴구간을 형성하는 경향을 나타냈다.