• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2822-2831
• /
• 1997

A B-ISDN network based on ATM must support several kinds of transport services with different traffic characteristics and service requirements. There is neither link-by-link flow control nor error control in the ATM layer. For different services, different flow/error controls could be performed at the AAL layer or at a higher Iayer(e.g. transport layer). In traditional data networks, the window now control mechanism combined with error control was used prevalently. But, the window flow control mechanism might be useless in ATM networks because the propagation delay is too large compared with the transmission rate. In this paper, we propose a simple flow control mechanism, called RCT(Rate Control for end-to-end Transport), for end-to-end data transport. The RCT shows acceptable performance when the average overload period is bounded by a certain time.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.216-225
• /
• 2004

In a cellular network, if there are too many data users in a cell, data may suffer long delay, and system's quality-of-service (QoS) will degrade. Some traditional schemes such as dynamic channel-allocation scheme (DCA) will assign more channels to hot (or overloaded) cells through a central control system (CC) and the throughput increase will be upper bounded by the number of new channels assigned to the cell. In mobile-assisted data forwarding (MADF), we add an ad-hoc overlay to the fixed cellular infrastructure and special channels-called forwarding channels- are used to connect mobile units in a hot cell and its surrounding cold cells without going through the hot cell's base station. Thus, mobile units in a hot cell can forward data to other cold cells to achieve load balancing. Most of the forwarding-channel management work in MADF is done by mobile units themselves in order to relieve the load from the CC. The traffic increase in a certain cell will not be upper bounded by the number of forwarding channels. It can be more if the users in hot cell are significantly far away from one another and these users can use the same forwarding channels to forward data to different cold neighboring cells without interference. We find that, in a system using MADF, under a certain delay requirement, the throughput in a certain cell or for the whole net-work can be greatly improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.50-60
• /
• 2015

A Block-Time-Bounded Time Division Multiple Access (BTB-TDMA) medium access control protocol, which estimates the propagation delay of nodes according to their location and moving velocity information, has been proposed for underwater acoustic networks. BTB-TDMA provides nodes with their transmission schedules by a time block that is a time unit, newly designed for BTB-TDMA. In this paper, we investigate how the receiver collision, that is induced by the asymmetry between node's uplink and downlink propagation delay due to its mobility, affects the performance of BTB-TDMA. To do this, we analytically obtain the collision rate, the channel access delay, and the channel utilization by considering the asymmetry of propagation delay. Then, simulations are extensively performed with respect to the length of a time block by varying the number of nodes, the network range, and the node's velocity. Thus, the simulation results can suggest performance criteria to determine the optimal length of a time block which minimizes the collision rate and concurrently maximizes the channel access delay and the channel utilization.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2031-2042
• /
• 2017

In this paper, a novel traffic flow control method based-on ramp metering and speed regulation using an adaptive sliding mode control (ASMC) method along with a deadzoned parameter adaptation law is proposed at a stochastic macroscopic level traffic environment, where the influence of the density and speed disturbances is accounted for in the traffic dynamic equations. The goal of this paper is to design a local traffic flow controller using both ramp metering and speed regulation based on ASMC, in order to achieve the desired density and speed for the maintenance of the maximum mainline throughput against disturbances in practice. The proposed method is advantageous in that it can improve the traffic flow performance compared to the traditional methods using only ramp metering, even in the presence of ramp storage limitation and disturbances. Moreover, a prior knowledge of disturbance magnitude is not required in the process of designing the controller unlike the conventional sliding mode controller. A stability analysis is presented to show that the traffic system under the proposed traffic flow control method is guaranteed to be uniformly bounded and its ultimate bound can be adjusted to be sufficiently small in terms of deadzone. The validity of the proposed method is demonstrated under different traffic situations (i.e., different initial traffic status), in the sense that the proposed control method is capable of stabilizing traffic flow better than the previously well-known Asservissement Lineaire d'Entree Autoroutiere (ALINEA) strategy and also feedback linearization control (FLC) method.

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.35-44
• /
• 1996

This paper presents a new type of fuzzy-sliding mode controller for robust tip position control of a single-link flexible manipulator subjected to parameter variations. A sliding mode controller is formulated with an assumption that imposed parameter variations are bounded so that certain deterministic performance can be guaranted. In the design of the sliding mode controller, so called moving sliding surface is adopted to minimize the reaching phase and thus mitigate system sensitivity to the variations. The sliding mode controller is then incorporated with a fuzzy technique to reduce inherently ever-existing chattering which is impediment in position control of flexible manipulators. A set of fuzzy parameters and control rules are obtained from a relation between predetermined sliding surface and representative points in the state space. Computer simulations are undertaken in order to demonstrate superior control performance of the proposed methodology.

• 전자공학회논문지 IE
• /
• v.46 no.2
• /
• pp.33-45
• /
• 2009

In this paper, the implementation of the backward movement control of a truck-trailer type mobile robot using fuzzy model based control scheme considering the practical constraints, computing time-delay and quantization is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period and predicted. The analysis and the design problem considering the computing time-delay become very easy because the proposed controller is syncronized with the sampling time. Also, the stability analysis is made when the quantization exists in the implementation of the fuzzy control architectures and it is shown that if the trivial solution of the fuzzy control system without quantization is asymptotically stable, then the solutions of the fuzzy control system with quantization are uniformly ultimately bounded. The experimental results are shown to verify the effectiveness of the proposed scheme.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.499-505
• /
• 2011

In this paper, we proposed an adaptive fuzzy sliding mode control for nonlinear systems without parameter projection method. By modifying the controller structure, the parameters of the estimated input gain function are guaranteed not being identically zero and it is shown that the control scheme will not cause any implementation problem even if the estimated value of input gain function is zero at any moment during on-line operations. Except for the input gain function which an approximate estimate for its lower bound is needed, the proposed control scheme does not assume a priori the exact values of the bounding parameters. Based on Lyapunov synthesis methods, the overall control system guarantees that the tracking error asymptotically converges to zero and that all signals involved in controller are uniformly bounded. This can be illustrated by the simulation results for an inverted pendulum system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.752-755
• /
• 1997

In this paper, a scheduling algorithm is proposed for a programmable logic controller(PLC) with remote I/Os, assuming the multi-tasking facilities. Since sequence programs are executed on the application processor and I/O data are transmitted by the network processor concurrently, the proposed algorithm schedules the data transmission as well as the sequence program execution. The suggested algorithm guarantees the bounded WCRT(worst case response time), which is the one third of the WCRT in the absence of scheduling. Computer simulation shows that the algorithm can be easily applied to a real PLC without critical constraints on utilization of resources and inter-relation among tasks.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1853-1858
• /
• 2004

This paper presents the development of a full order sliding mode controller for tracking problem of a class of uncertain dynamical system, in particular, the direct drive robot manipulators. By treating the arm as an uncertain system represented by its nominal and bounded parametric uncertainties, a new robust fullorder sliding mode tracking controller is derived such that the actual trajectory tracks the desired trajectory as closely as possible despite the non-linearities and input couplings present in the system. A proportional-integral sliding surface is chosen to ensure the stability of overall dynamics during the entire period i.e. the reaching phase and the sliding phase. Application to a three DOF direct drive robot manipulator is considered.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.536-539
• /
• 2004

IEEE 802.11 Point Coordination Function (PCF) mode is defined to support time bounded traffic, such as voice in wireless LANs. The poll scheduling plays an important role in IEEE 802.11 PCF mode operation. This paper proposed a Multicast Polling Scheme (MPC) to increase the performance of wireless LANs. Moreover, we proposed a polling schedule scheme for our proposed multi-poll to serve real-time traffic. The results show that the proposed mechanism is more efficient than the original IEEE 802.11 PCF.