• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.413-420
• /
• 2003

In this paper an analytical study is carried out to examine the effectiveness of absorbing boundaries using dashpot. Validity of the absorbing boundary conditions suggested by Lysmer-Kuhlemeyer and White et al. is investigated by adopting the solution of Miller and Pursey. The Miller and Pursey's problem is then numerically simulated using the finite element method. The absorption ratios are calculated by comparing the displacements at the absorbing boundary to those at the free field without the absorbing boundary. The numerical verification is carried out through comparison of displacement at the boundary.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.1023-1031
• /
• 2015

In infrared (IR) images, near targets have a transient distribution at the boundary region, as opposed to a steady one at the inner region. Based on this fact, this paper proposes a novel IR target extraction method that uses both a weighted information entropy (WIE) and an adaptive opening filter to extract near finely shaped targets in IR images. Firstly, the boundary region of a target is detected using a local variance WIE of an original image. Next, a coarse target region is estimated via a labeling process used on the boundary region of the target. From the estimated coarse target region, a fine target shape is extracted by means of an opening filter having an adaptive structure element. The size of the structure element is decided in accordance with the width information of the target boundary and mean WIE values of windows of varying size. Our experimental results show that the proposed method obtains a better extraction performance than existing algorithms.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2477-2482
• /
• 2008

Effect of computational domain size in simulating of periodic obstacle flow has been investigated for the flow past tube banks. Reynolds number, defined by freestream velocity (U) and cylinder diameter (d), was fixed as 200, and center-to-center distance (P) as 1.5d. In-line square array was considered. Drag coefficient, lift coefficient and Strouhal number were calculated depending on domain size. Circular cylinders were implemented on a Cartesian grid system by using an immersed boundary method. Boundary condition is periodic in both streamwise and lateral directions. Previous studies in literature often use a square domain with a side length of P, which contains only one cylinder. However, this study reveals that size is improper. Especially, RMS values of flow-induced forces are most sensitive to the domain size.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.121-128
• /
• 1997

The Boundary Element Method(BEM) has many advantages. Nevertheless the applicability of BEM to structural analysis is seemed to be behind the other methods. This study presents the application of the BEM for analysis of assembled plate structures which is light weight and has a great loading capacity. Firstly, we formulate the boundary integral equation of the single plate, using the biharmonic fundamental solution for plate bending and internal force problems. Nextly, each plates are assembled on 3-dimensional space. In this process, the boundary conditions on assemble line are used. To verify the objectivity and universal validity of analysis by BEM, the results of BEM was compared to that of SAP90 by using FEM.

• Structural Engineering and Mechanics
• /
• v.23 no.2
• /
• pp.115-127
• /
• 2006

The axisymmetric free vibrations of transversely isotropic magnetoelectroelastic laminated circular plates are studied. Based on the three-dimensional governing equations of magnetoelectroelastic medium, the state space equations of laminated circular plates are obtained. By using the finite Hankel transform and rendering the free terms left by the transform in terms of the boundary quantities, the solutions of the state space equations are given for two kinds of boundary conditions. The frequency equations of the free vibration are derived using the propagator matrix method and the boundary conditions at top and bottom surfaces. By virtue of the inverse Hankel transform, the mode shapes are also determined. Since the solutions strictly satisfy the governing equations in the region and the boundary conditions at the edges, they are the three-dimensionally exact. Finally, the natural frequencies of such plates are tabulated and compared with those of the piezoelectric and elastic plates in the numerical example.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1207-1216
• /
• 1988

The most 3-Dimensional problems of composite materials, especially three-dimensional stress or strain distribution on jointed boundary in composite materials remains unsolved due to the limitations of analytic techniques. The purpose of this paper is to apply the Embedded Grid Method to model development to measure the three-dimensional strain distribution along the jointed boundary of composite materials which consist of two different materials. It was confirmed that the Embedded Grid Method was very useful in model development and measuring the three-dimensional strain distribution in a local region near the jointed boundary.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.353-356
• /
• 2004

Nonlinear numerical analysis was performed to investigate the behavioral characteristics and failure mechanism of flexure -dominated structural walls with partially confined boundary elements. Based on the results, deformability of walls with partially confined boundary elements was evaluated, and a design method which can determine depth of confined boundary element according to given ductility demand, was developed. Also, effective details of laterally confining re-bars were proposed for boundary elements with rectangular cross-section. The design method can be used to choose the spacing of confining re-bars assuring the confining effect and constructability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.182-187
• /
• 2006

This paper proposes a method for boundary recognition of named entity using hidden markov model and ontology information of biological named entity. We uses smoothing method using 31 feature information of word and hierarchical information to alleviate sparse data problem in HMM. The GENIA corpus version 2.1 was used to train and to experiment the proposed boundary recognition system. The experimental results show that the proposed system outperform the previous system which did not use ontology information of hierarchical information and smoothing technique. Also the system shows improvement of execution time of boundary recognition.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.2
• /
• pp.1-11
• /
• 2003

We suggest a method of $C^2$ surface extension with the aid of well-controlled functions. The extended surface is $C^2$ continuous along the old boundary. The function of the extension surface is obtained by replacing the monomials in the quadratic Taylor polynomial of the given surface-representing function by other functions subject to some boundary conditions. We present several sets of control functions. In order to illustrate our suggestion, it is shown that surfaces with a circular boundary and a square boundary can be extended using several base functions.

• Advances in nano research
• /
• v.15 no.5
• /
• pp.411-422
• /
• 2023

In the present study, the axial vibration of the nanorods is investigated in the framework of the doublet mechanics theory. The equations of motion and boundary conditions of nanorods are derived by applying the Hamilton principle. A finite element method is developed to obtain the vibration frequencies of nanorods for different boundary conditions. A two-noded higher order rod finite element is used to solve the vibration problem. The natural frequencies of nanorods obtained with the present finite element analysis are validated by comparing the results of classical doublet mechanics and nonlocal strain gradient theories. The effects of rod length, mode number and boundary conditions on the axial vibration frequencies of nanorods are examined in detail. Mode shapes of the nanorods are presented for the different boundary conditions. It is shown that the doublet mechanics model can be used for the dynamic analysis of nanotubes, and the presented finite element formulation can be used for mechanical problems of rods with unavailable analytical solutions. These new results can also be used as references for the future studies.